scrap system Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Titanium Scrap Metal Processing

    Background A world-class processor of titanium scrap had a wash system whose cleaning solution was becoming contaminated with both free floating unemulsified tramp oil and emulsified water soluble oil that was being washed off of titanium turnings. As the level of oil contamination increased over time in the wash solution, cleaning effectiveness diminished. The processor uses a metric, ...

  • Scrap Metal Recycling 1

    Integrated Engineers provided treatability services for the facility for three areas onsite: the oil water separator, tin baler effluent water, and aluminum shavings/cutting oil runoff. The facility processes and bales scrap metal for recycling. The three different waters were treated with Floccin J. Oil Separator The oil separator water is used to remove any free oil that is floating on top of ...


    By Integrated Engineers Inc.

  • How to Recycle Radiator Scrap?

    Radiator is widely used in cars, trucks and other automobiles. Radiators were also once an essential part of a home heating system. In today’ s life, AC radiator is more known by commons. Before discussing how to recycle radiator, let’s have a general knowledge of this three kinds of radiators. Car radiators was almost born with the automobile itself. We know that, as the ...

  • Scrap Metal Recycling 2

    This facility was mandated by the Regional Water Control Board to install a treatment system to treat the 8 gpm from their pressure washing operations. The pressure washer is used to remove the dirt mixed with oil and grease from the cranes and skip loader used in the loading and unloading of metal. Integrated Engineers was hired to design and install (turnkey) a 100% water reuse system so the ...


    By Integrated Engineers Inc.

  • How To Recycle Scrap AC Radiator

    Every scrapper’s dream is to find a “jackpot” of metal that is ripe for the picking. If you have any type of experience under your belt, you’ll know that “jackpots” are not happened upon often...unless, you happen to find an AC radiator. These are the non-ferrous tube systems that are used to compress air and radiator off heat. The bigger the AC unit, ...

  • Increased profit from scrap metal

    Reduced availability of scrap metal makes it essential to get the best price for steel and maximise recovery of more valuable metals. The re-emergence of the Far East markets provides the opportunity to take advantage of thousand of empty containers travelling East.  FTL-Dunn Container Loaders give you the flexibility to respond to market demands to maximise the value of your scrap. The ...


    By FTL Foundry Equipment Ltd

  • Scrap old approaches to conveying material

    (From The Fabricator) Carefully designed scrap removal systems increase machine efficiency To get the most from high productivity equipment, manufacturers must move parts and Scrap efficiently and reliably. This makes conveyance equipment an essential consideration.  In fact, the right combination of conveyance and feeder equipment can mean the difference between breakdowns and ...


    By Eriez Magnetics Europe Ltd

  • Building Farm And Food Scrap Digesters

    In the past several weeks, we received invitations to two ribbon cuttings for newly installed farm-based digesters — one at a dairy farm in western Massachusetts and another at a swine operation in North Carolina. We also received a press release from the University of California, Davis, about its new food scraps digester on campus. And then there were a few new projects that we had been ...


    By BioCycle Magazine

  • Improvements on a system for soil erosion control of slopes using scrap tyres

    This work proposes improvements on the assembly process of a slope protection system using scrap tyres to reduce severe erosion that occurs in non-vegetated slopes. Tests results during six rain events, with maximal intensity of 26 mm/hr and accumulated rainfall of 94.5 mm, indicate that the installation cost of the system was $1.10USD/tyre and reduced the erosion by 83% with respect to an ...


    By Inderscience Publishers

  • Car and e-scrap recycling: the Chinese experience

    In late November, more than 220 delegates met in China for the World Recycling - Shanghai congress organised by Switzerland-based ICM. Among other issues, the focus fell on latest trends in car and electronics scrap recycling within China itself. Several speakers emphasised that much remains to be done to bring the country into line with standards adopted in other parts of the world. Tighter ...


    By Recycling International

  • E-scrap regulations: calls for stronger enforcement

    Demands for an enhanced producer responsibility system and on-going adaptation of the Directive on Waste Electrical and Electronic Equipment (WEEE) by EU member states provided the two main areas of discussion at the 2008 International Electronics Recycling Congress (IERC) in Salzburg, Austria. The congress was marked by a call for greater enforcement of regulations, increased collection rates ...


    By Recycling International

  • Market Is Calling for the Scrap Metal Crusher Machine

    In the twenty first century, the steel industry of China steps into its rapid developing stage. Scrap metal crusher machine is developing with the quick demands of the market. It is a way to reuse and recycle the scraps of the steel by crushing and classifying different quality steel. There is a large demand for the scrap ...


    By Fote Machinery

  • Auto Repair & Recycling Industry: Service and Scrap Business Saves Money, Stays True to `Green Roots`

    At Jeff’s Auto Body & Recycling Center Inc., old things become new again. Since 1978, Jeff Kurtz and his family have been restoring and fixing cars, as well as offering a variety of recycling services to Paxinos, PA, and surrounding communities. PROBLEM: In 2011, Kurtz realized that he could do more to clean up the wastewater run-off from the auto repair and service facility. In ...


    By Oil Skimmers, Inc.

  • How to get the most value from scrap metal recycling from demolition projects

    Demolition (also known as wrecking or razing) can be a large source of scrap metals depending on the type of item, structure or faciluity being demolished. Metal buildigs or large industrial complexes usually provide the largest sources of metals for recycling. Scrap metals for recycling can be found in the structural members of the buildings, electrical and piping systems, tanks, reactors, heat ...

  • Garden Street Iron & Metal Processes 8,000 Tons of Scrap Each Month Using Variety of Eriez Recycling Equipment

    Problem: Garden Street Iron & Metal recycling complex, located just west of downtown Cincinnati, OH, has been owned and operated by the Weber family for more than five decades. The complex, set on 22 acres with three nearby rail spurs in Spring Grove, is a beehive of activity as both consumers and businesses truck in ferrous and nonferrous metal for re-processing. To remain on the ...


    By Eriez Magnetics Europe Ltd

  • The Daily Grind: Scrap from panel saws is conveyed under production floor to grinder

    Cabinet manufacturing giant KraftMaid Cabinetry, Inc. in Middlefield, Ohio, engineered a material handling solution that has not only resulted in labor savings, but has also increased production efficiency and proved to ...


  • Martin-baker turns scrap metal and fluid into revenue stream with PRAB’s Dualpak Briquetter

    Challenge Aerospace manufacturer needs a chip and fluid processing system to keep up with its machining demands by reducing the volume of metal turnings and to recover expensive cutting fluids for reuse. Customer Martin-Baker Industry Aircraft Ejection Seat Manufacturer Products Dualpak ...


    By PRAB, Inc

  • Zero Waste System in Paradise

    Most visitors to Fiji come for rest and relaxation on the white sand beaches or for diving and snorkeling among the unspoiled coral reefs. Few visitors realize that this tropical island in the South Pacific, north of New Zealand, is on the cutting edge of industrial ecology with a fully functional, zero waste program located near the Fijian capital of Suva. As part of an EPA funded review of ...


    By BioCycle Magazine

  • Building Sustainable Sanitation Systems

    A low cost system of resource management such as composting toilets is helping to mitigate many of Haiti’s social and ecological challenges. The Caribbean Republic of Haiti — the poorest, most environmentally degraded country in the Western Hemisphere with a population of about 10 million — is a case study in forestry and soil fertility mismanagement. A colonial ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you