seawater reverse osmosis system Articles

  • Seawater feed reverse osmosis preheating appraisal, Part II: system performance

    The present work evaluates the seawater feed Reverse Osmosis (RO) preheating system process. In this respect, the basic transport equations, which describe the system elements, are used for determining the performance of the process operating parameters and for assessing the feed preheating process. A seawater membrane, FTSW30HR-380, was used to perform this study. In Part I of the work, the ...


    By Inderscience Publishers

  • Experiences with the conventional pretreatment system in the seawater reverse osmosis plant at Kalpakkam

    A 1800 m³/day Seawater Reverse Osmosis (SWRO) plant was commissioned in October 2002 at Kalpakkam, India, as part of the Nuclear Desalination Demonstration Project (NDDP). The conventional pretreatment scheme was adopted consisting of a lamella clarifier, pressurised sand filter, activated carbon filter and cartridge filter. The dosing of pretreatment chemicals, ferrous sulphate and ...


    By Inderscience Publishers

  • Assessment of an ultrafiltration pre-treatment system for a seawater reverse osmosis plant

    The seawater reverse osmosis system requires extensive pre-treatment in order to ensure reliable performance. The conventional pre-treatment system involves dosing of chemicals, which requires frequent monitoring of raw water quality, and also involves adjusting the dosage. Besides being cumbersome, there is a lot of time lag involved in carrying out these measures. This calls for pre-treatment ...


    By Inderscience Publishers

  • Seawater reverse osmosis system for supplying potable water for airport in saudi arabia

    The Background Saudi Arabia General Authority of Civil Aviation (GACA) is responsible for constructing, managing, operating, and maintaining airports and air navigation infrastructure in Saudi Arabia. The city lacked adequate water production and distribution systems around the airport. GACA’s objective was to increase water production to meet projected growth in demand, and ...

  • Cogenerative seawater reverse osmosis. Part 1: elements characteristics

    This work is a part of an extensive study performed in the area of cogenerative seawater Reverse Osmosis (RO) design, appraisal and rehabilitation. It is concerned with large-scale contiguous seawater RO systems, focusing on the 8040-type membranes of high-flow and high-salt rejection ranging in area from 300 to 400 ft². Seventeen types of membranes are selected between large- and medium-sized ...


    By Inderscience Publishers

  • Fouling and cleaning of seawater reverse osmosis membranes in Kalpakkam nuclear desalination plant

    A seawater reverse osmosis plant of 1800 m³/day capacity is part of the 6300 ³/day capacity nuclear desalination demonstration project at Kalpakkam. The plant was commissioned in October 2002 and is in continuous operation. This paper deals with types of foulants, membrane cleaning procedures and the improvement in the reverse osmosis system after cleaning. This paper also describes the analysis ...


    By Inderscience Publishers

  • Reverse Osmosis Element Design

    Introduction  TORAY REVERSE OSMOSIS MEMBRANE ELEMENTS are functional membrane elements with excellent quality and high performance developed with the polymer engineering expertise Toray has gained over the years. Toray Reverse Osmosis Membrane Elements are high rejection and high flux RO elements that have been meeting the high level requirements of our customers in many applications: ...


    By Toray Membrane Europe

  • On the performance limitation of reverse osmosis water desalination systems

    The performance of Reverse Osmosis (RO) water desalination processes was investigated using a simulated brackish water plant based on spiral-wound membranes. A semi-rigorous mathematical model was employed in the simulation to calculate the water and salt fluxes at any point along the filtration channel. The effects of two key parameters, namely the transmembrane pressure and membrane surface ...


    By Inderscience Publishers

  • Safety and reliability aspects of seawater reverse osmosis desalination plant of nuclear desalination demonstration project

    Desalination systems are mostly based on membrane (RO) and thermal (MSF and MED) processes. High-pressure operation and high level of corrosion are the major aspects of concern in a Seawater Reverse Osmosis (SWRO) Plant. Selection of the appropriate material for construction and the following of the proper design, fabrication and testing codes, and safe operational procedures ensure the safety of ...


    By Inderscience Publishers

  • Seawater feed reverse osmosis preheating appraisal, Part I: leading element performance

    This paper is concerned with the seawater reverse osmosis preheating process, and presents a parametric study of the process. The basic transport equations describing the leading element are exhibited and appraised. The leading element, which governs the whole system performance, is studied and analysed. The incorporated and investigated operating parameters are the feed pressure and the ...


    By Inderscience Publishers

  • Seawater reverse osmosis plant for india’s first 4,000 MW ultra mega power project

    The Facility India’s first Ultra Mega Power Project (UMPP) at Mundra in Coastal Gujarat, a 4,000 MW coal fired plant, is owned by Coastal Gujarat Power Limited (CGPL), a Tata Power group company. Tata Power is India's largest private sector power utility with an installed generation capacity of over 2,300 MW. The CGPL UMPP, awarded on a 20 year BOOT basis, will be India’s ...

  • Selecting a pump for sea water reverse osmosis

    Reverse osmosis (RO) desalination has become a significant process used in the purification of water. Selecting the correct pump is a significant step in a well designed and properly operating pumping system. Although the pump is a relatively small part of the overall cost of an RO system, expenses resulting from downtime and inefficiency can quickly diminish the productivity of the RO system and ...


    By Cat Pumps

  • Evaluating impact of fouling on reverse osmosis membranes performance

    Abstract Membrane fouling is commonly defined as an undesirable formation of deposits on mem- brane surfaces and it is considered a major problem in most brackish, seawater, and waste water reclamation applications. Depending on nature of the scale and foulant, fouling pro- cesses will lead to decreased membrane fluxes, increased pressures needs, and/or increased permeate conductivity. ...

  • Reverse Osmosis Technology – KURIVERTER RC - Case Study

    Summary Applications using Reverse Osmosis membrane technologies are everywhere in our lives – from tiny under counter units polishing our drinking water through industrial units preparing water for processes or purifying effluents for reuse and massive seawater desalination plants producing thousands of m³ of drinking and irrigation water every day. The membranes used in this ...


    By Kurita

  • Brackish Water Reverse Osmosis Devices, Dubai UAE

    INTRODUCTION In August 2013, Pure Aqua, Inc. designed and manufactured brackish water reverse osmosis devices to a major company in Dubai, UAE to treat well water. There were four BW-1.5K-140 systems each designed to produce 1,500 GPD at a feed water TDS of a maximum 5,000 ppm, it was selected from our ...


    By Pure Aqua, Inc.

  • Overview of seawater desalination status and challenges

    Introduction World oceans contain over 97.2% of the planet’s water resources. Because of the high salinity of ocean water and the significant costs associated with seawater desalination most of the global water supply has traditionally come from fresh water sources – groundwater aquifers, rivers and lakes. Today, however, changing climate patterns combined with population ...


    By IWA Publishing

  • Seawater desalination using reusable type small PWR

    Demand for seawater desalination is increasing, especially in regions such as the Middle East and North Africa, where populations are growing at a high annual rate. If such demand is met by fossil fuel energy, the influence on the environment, such as global warming, cannot be disregarded. Since these regions are behind in their preparedness of social capital infrastructure, such as power ...


    By Inderscience Publishers

  • Results from 99 seawater ro membrane autopsies

    Abstract This paper presents results from 99 sea water reverse osmosis (SWRO) membrane autopsies carried out by the Genesys laboratory in Madrid from 2002 and outlines the technical issues surrounding fouling and scaling of sea water membranes. The authors discuss historical results of membrane autopsies and link recent trends and changes in plant design to potential fouling and ...

  • Removal of micropollutants and NOM in carbon nanotube-UF membrane system from seawater

    One of the main problems for seawater reverse osmosis desalination is membrane fouling associated with natural organic matter. Bisphenol-A (BPA) and 17α-ethinylestradiol (EE2) are well-known endocrine-disrupting compounds that have been detected in wastewater and seawater. In this study, the contribution of carbon nanotubes (CNTs, single-walled carbon nanotubes) to membrane fouling control and ...


    By IWA Publishing

  • Boron removal by activated carbon and microfiltration for pre-treatment of seawater desalination

    This study aimed to enhance boron removal through powdered activated carbon adsorption (PAC) and application of a micro-filtration (MF) process as a pretreatment of a seawater reverse osmosis (SWRO) process. Batch and continuous experiments were conducted to investigate the effect of membrane filtration as well as PAC addition on boron removal in reconstituted seawater. In batch test, two kinds ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you