secondary containment pipe Articles

  • Secondary removal of chlorophenolic contaminants in water

    In this study, several factors important for the design of a water supply treatment system for the removal of trace amounts of organic contaminants by microorganisms in a fixed-film were assessed. This entailed evaluating the effect of seeding with adapted microorganisms on the acclimation time, determining what depth of support material was required for removal of contaminants and observing the ...


    By Inderscience Publishers

  • Bulk Storage and Piping Case Study

    Background: This major steel manufacturer was founded in 1900 in and established the first formal research department in the steel industry in 1910. It grew through the development of specialty steels and new technology. Among the many "firsts" was the development of continuous rolling technology. This company holds more U.S. patents than any other specialty steel company. ...


    By Mech-Chem Associates, Inc.

  • Pressure-loss computation procedures for non-Newtonian pipe flow

    Wastewater sludge with solids concentrations above about 2 percent exhibit non-Newtonian behavior, i.e., the sludge apparent viscosity changes with the shear rate (flow velocity). To determine pipeline head loss for sludge streams to and from anaerobic digesters, samples of primary, secondary and digested sludge were collected from Orange County Sanitation District Plant No. 1 and analyzed to ...

  • World`s Largest Pipe Contract Awarded to Fabricated Plastics for Expansion of Petrochemical Complex in Texas

    When Fabricated Plastics Limited of Maple, Ont., was given the contract to supply all the piping required for the expansion of a plastics resin plant in southern Texas, it proved to be the largest single pipe contract ever awarded. In terms of variety of pipe and chemical service requirements, it was also one of the most complicated and demanding, with different molded laminates and pipe lining ...


    By Fabricated Plastics Limited

  • The Second Line of Defence

    The environment is at the top of everyone’s agenda. Oil and related products can be a threat to the natural world when they leak, causing major environmental consequences that kill wildlife, pollute water and spoil agricultural land. It takes both great expense and time to clean up a spill, so a second layer of protection is required as a safety net. The first layer of protection present at ...


    By Maple Grove Enterprises

  • Great Island Tank 4 and bund refurbishment - case study

    Lining works to refurbish the existing tank farm secondary containment bund and HFO Tank 4 are ongoing at Great Island CCGT project. Lining Tech are contracted in to Balfour Beatty Ireland on this design and build project for the client Tank 4 Works Installation of 1,140m2 of 1mm HDPE leak detection liner to the floor of HFO tank 4 Fabrication and installation ...

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • Feds propose new reg to remove leaking storage tanks from service

    With spills and leaks from storage tank systems that contain petroleum products continuing to pose significant health and environmental risks, the federal Department of the Environment proposed recently a new regulation to reduce the risk of contaminating soil and groundwater. The proposed Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations would replace the ...

  • Versatility is the key with the Blue-White hybrid ultra-sonic flowmeter, “sonic-pro”, at the Key West WWTP

    The Florida Keys have long been known for its exotic islands, pristine snorkeling, artistic charm, and a magnificent coral reef. This natural beauty attracts millions of tourists every year. Needless to say, maintaining the quality of the sea water surrounding the keys is essential to the allure and economic viability of the area. The Key West Southernmost Wastewater Treatment Plant was ...


  • Side By Side By Side: The Evaluation of Three High Rate Process Technologies for Wet Weather Treatment

    ABSTRACTMost large combined sewer communities face significant financial investment to address wet weather compliance issues. Innovative, cost-effective methods of dealing with wet weather flows is a must to prevent spiraling rate increases for rate payers. High rate clarification and high rate filtration systems are becoming the technology of choice for treating wet weather flows. The City of ...

  • Wastewater Treatment Plant - Newport, New Hampshire - Case Study

    THE CHALLENGE Newport, New Hampshire is a small New England community of 6000 residents. The treatment plant treats primarily residential sewerage, although Newport is home to an internationally known firearms company, which also sends its waste to the municipal plant for treatment. This 1.3 MGD plant which operates at an average of .75 MGD, was built in 1971 and upgraded in 1988 to ...

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Lead and Zinc Smelting Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Designing With Geosynthetic Clay Liners

    In construction, preventing the penetration of liquids and gases is essential to maintaining the integrity of a structure. Often, containment is just as important, especially when dealing with chemical contaminants or other waste. When looking to stop the spread of contaminated liquids and gases, there are few tools as effective as geosynthetic clay liners (GCL). Read on to learn how to design ...


    By Agru America, Inc.

  • Case study - Allburn Incinerators

    PROJECT 19 off containerised Allburn 3 Incinerators World Health Organisation—Ethiopia PROJECT DESCRIPTION Top loaded, diesel fired, low capacity incinera-tors, factory -installed within 20’ ISO shipping containers, for the disposal of bagged general/clinical waste from hospital and clinics, animal and industrial waste. To be ...


    By Todaysure Matthews

  • Case Study - The performance of the grease degrading bioproduct greasolux in the meat manufacturing factory and municipal WWTP

    Problem A municipal waste water treatment plant in one Baltic town continuously had problems with the fat, oil and grease (FOG) accumulation in the sewer lines, lift stations and waste water treatment plant, since the start up of a local meat processing facility. The highly polluted waste water directly impacted the treatment plant in the following ways: Increased grease ...


    By Ecochemicals UAB

  • Is Waste Going to be Our Apocalypse Without a Noah’s Ark to Save Us?

    Human beings have been dumping waste in water, including the ocean, since before the Agricultural Age. The Industrial Age brought with it new materials to dump, chemical wastes and by-products. Some materials are dumped into rivers and find their way to the ocean by running downstream. Other materials are dumped directly into the ocean from boats. Plastic is a harmful pollutant that does not ...


    By ABCOV Companies

  • Manure Spills: Prevention, Detection, Control Options, & the Role of Anaerobic Digesters

    An internet search for manure-related spills can lead to an exhausting list of news articles and images of catastrophic environmental damage. In Wisconsin alone, the ...


    By BIOFerm™ Energy Systems

  • What are the treatment options for landfill leachate?

    New contributor to Water/Waste Processing aims to answer readers’ most pressing questions It’s said the United States has 1,654 landfills, handling more than 250-million tons of trash each year. One Washington landfill covers a 2,545-acre area, has a 120-million-ton capacity and a 40-year expected trash-receiving life. The facility, the Republic ...

  • Pharmaceuticals Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you