secondary fuel production Articles

  • Sample preparation for the analysis of secondary fuel in cement plants

    Secondary fuel can be a very inhomogeneous sample, containing all types of polymers, paper, wood and low fractions of metal. Also recycled wood or parts of automobile tires might be used as secondary fuel. Before using it as fuel in the production of cement, several chemical analyses are necessary as quality control. Cement is made by heating limestone (calcium carbonate), with small quantities ...


    By Fritsch Milling and Sizing

  • Alternative Fuel from Waste

    Alternative Fuel From Waste Municipal waste has always been seen by the public as the foul-smelling waste that nobody wants near home. In the last decades due to the cost increasing of raw materials for heating and electric energy production, it has begun to evaluate and use waste as an “alternative” energy source. ...


    By SA Eng.

  • Fuel upgrading improves cars operation

    Gasoline is the mix of easily boiling liquid various hydrocarbons received at distillation of oil, natural gas reclamation, processing of fuel firm types and at secondary processing of products of oil distillation. The most important for gasoline are detonation requirements and fractional structure on which their properties depend. Operation without detonation of the engine is reached by gasoline ...

  • Fuel upgrading improves cars operation

    Gasoline is the mix of easily boiling liquid various hydrocarbons received at distillation of oil, natural gas reclamation, processing of fuel firm types and at secondary processing of products of oil distillation. The most important for gasoline are detonation requirements and fractional structure on which their properties depend. Operation without detonation of the engine is reached by gasoline ...

  • Applications of Tray Pads in Rolling Mills and the Secondary Aluminum Industry

    Due to the rapid growth in the use of aluminum by automobile manufacturers, there have been an increased supply demands for aluminum rolling mills. The aluminum industry is buoyant as manufacturers take advantage of the materials strength and lightness in preference to steel. A good example is Ford committing to aluminum for the F-150 pick-up truck. Ford Motor made a bold gamble in 2015 with a ...


    By Mid-Mountain Materials Inc.

  • Refinery remediation: fuel recovery and recycling

    Introduction The site is a former refinery that occupied approximately 64 acres of land in West Texas. Refinery operations produced all grades of gasoline, tractor fuels, diesel, distillate products, and fuel oils and operated between 1939 and 1954. As a result of past waste management practices, releases to soils and ultimately ground water occurred, resulting in the formation of a ...

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • Cement production in the land of the Pharaohs case study

    LaFarge, worldwide-leading building materials producer with its head office in Paris has successfully installed a WEIMA PowerLine 3000 shredder in the cement works in El Sokna (Egypt) and commissioned this for processing secondary fuels. In the searing heat and surrounded by desert dust, the flexible and universal shredder shreds around 13 tons of material (mainly domestic and municipal waste ...


    By WEIMA

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • Biomethane production at Ontario wastewater treatment plant

    The City of Hamilton is purifying biogas and injecting it into the grid, while continuing to generate power and recover heat from its CHP system. Hamilton, Ontario, has long been a leader in producing biogas from its sewage and storm water wastes. Half a century ago, the city of 520,000 began processing sludge from its sprawling Woodward Avenue Wastewater Treatment Plant through anaerobic ...


    By BioCycle Magazine

  • Treatment of high strength resin production wastewater case study

    Problem Full-scale Incineration of this wastewater had proved very expensive due to the fuel input required and the ongoing incinerator maintenance costs. The polymer manufacturer sought treatment alternatives to save money. Initial biotreatment pilot work indicated that biotreatment was not feasible using conventional activated sludge technology even when the concentrated wastewater was ...


    By Bioscience, Inc.

  • Feed Manufacturer Installs High Efficiency Recuperative Oxidizer Due to Production Increase

    Operating Issue A global animal feed researcher and producer increased their capacity at their Midwest facility, thus requiring air pollution control technology that addressed their new process. Pollution Systems was sought to provide equipment to effectively reduce odors in 40,000 SCFM of VOC-laden process air, generated by the production of animal supplements. Additional objectives, ...


    By Pollution Systems

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...

  • One TANA Shark replaces two machines in the efuse-derived fuel (RDF) business - Case Study

    For Attero Recycling Ltd. operating in the alternative fuels sector, TANA Shark is the only shredder on the market that can produce the required particle size for solid recovered fuel (SRF) in a single pass. After the purchase, Attero was able to cut the number of machines in half and increase output, saving time and money. ...


    By Tana Oy

  • KAB - Polaris 2800 - Polaris Single-Shaft Shredder from Lindner optimizes the one-step processing of refuse-derived fuel - Case Study

    The Polaris 2200 and 2800 are two new single-shaft shredders from Lindner that have been optimized for the cost-efficient, single-step shredding of untreated household refuse as well as industrial and commercial waste. A typical application area is the processing of refuse-derived fuel (RDF) that is used instead of fossil fuels in calciners of cement factories or in thermal power plants. Because ...


    By Lindner-Recyclingtech GmbH

  • Important environmental issues at aviation facilities, Part I

    There are numerous federal, state, and local environmental regulations that apply to aviation facilities. The requirements are continually expanding due to new and revised regulations. There has recently been a significant increase in inspection frequency and official letters of non-compliance. FBO facilities are the most often targeted. Since fuel storage is usually the greatest environmental ...


    By DES, Inc.

  • New solid waste definition proposed

    When the Boiler MACT rule was vacated in 2007, one key element in the court challenge was that many non-fossil fuel materials burned in industrial boilers should be classified as solid wastes and regulated accordingly. Along with the recently proposed Boiler MACT and rules for commercial/industrial/solid waste incinerators (CISWI), EPA proposed criteria to determine whether non-hazardous ...


    By Trinity Consultants

  • Identifying energy and carbon footprint optimization potentials of a sludge treatment line with Life Cycle Assessment

    This study exemplifies the use of Life Cycle Assessment (LCA) as a tool to quantify the environmental impacts of processes for wastewater treatment. In a case study, the sludge treatment line of a large wastewater treatment plant (WWTP) is analysed in terms of cumulative energy demand and the emission of greenhouse gases (carbon footprint). Sludge treatment consists of anaerobic digestion, ...


    By IWA Publishing

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Feds propose new reg to remove leaking storage tanks from service

    With spills and leaks from storage tank systems that contain petroleum products continuing to pose significant health and environmental risks, the federal Department of the Environment proposed recently a new regulation to reduce the risk of contaminating soil and groundwater. The proposed Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations would replace the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you