service gate valve Articles

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Divers install eccentric plug valve in reservoir tunnel

    A team of specialist divers – working in a cramped, water-filled tunnel 20 metres beneath the surface of a reservoir – has just completed installation of an eccentric plug valve to control water flow.The valve and associated equipment has been supplied to United Utilities by Viking Johnson (http://www.vikingjohnson.com), a world leader in the supply of pipe joints ...


    By Viking Johnson

  • Replacement Fill Control Valves with Electronic Flow and Metering Improve Pressure, Stop Leakage and Prevent Valve Failures

    The City of Modesto, California is situated 90 miles east of San Francisco and has approximately 200,000 residents relying on 200,000 of gallons of water a day. The City needed to upgrade three water storage tanks that hold approximately 750,000 gallons each. After years of using motor operated valves to fill water storage tanks, the city recognized that there were just too many problems. ...


    By Singer Valve Inc.

  • Belfast city sewer case study

    Client: NIWater CSG provided a number of valves to go in to the newly refurbished Belfast City Sewer. Originally installed during Victorian times the sewer system has been updated in order to reduce flood risks and improve the general infrastructure. The project comes at a cost of £120M and encompasses over 10km of pipeline. It has won a number of awards for innovation and is the ...

  • East hull pumping station case study

    Client: Yorkshire Water CSG provided two 1200mm Hydraulic Cylinder Gate Valves as part of the East Hull Pump Station overhaul. CSG worked in partnership with Pacific Valves Ltd on the £16m flood prevention project commissioned by Yorkshire Water. Due to the low ground levels in and around Hull flooding can often be an issue. The new pumping stations will help control drainage in the ...

  • Rotork is ‘one-stop actuation shop’ for storage tank expansion project - Case Study

    Overview Rotork has demonstrated its ability to be a one-stop shop for valve actuation products and services for an oil storage tank expansion project in Holland. Rotork's activities have encompassed the supply of intelligent electric actuators for isolating, modulating and failsafe valves, digital control systems, valve gearboxes, valve adaptation, workshop motorisation, on-site ...


    By Rotork

  • Tidal Water case study

    References from WaStop International´s own patented products. WaStop solves problems in a secure and efficient way. Harwich harbour - ENGLAND Anglian Water is one of the leading providers of water and waste water services in Europe and serves the needs of around six million industrial, commercial and domestic customers. Aggressive tidal waters, silt and poor ...


    By WaStop International AB

  • Insufficiently Filled solution - Plastic Injection Molding Defects Solution

    Plastic Molding Defects Solution For Insufficiently Filled: * Use plastics with low viscosity and sound fluidity or adjust prescription of plastics and reduce viscosity of melt. *Improve barrel temperature, increase injection pressure,raise melt temperature to reduce viscosity, and improve plastication quality. *Improve mold temperature and ...


    By Focare Mould Co.,Ltd.

  • River weir upgrade illustrates Rotork’s extended scope capabilities - Case Study

    Overview Rotork is well known for supplying flow control equipment for new and upgraded industrial plants and processes on a global scale. In these contracts, often involving tens or hundreds of valve actuators and associated control equipment, Rotork works with valvemakers, engineering companies and end users as one of several members of a project team, each with different areas of ...


    By Rotork

  • Case study - City of Rockville - Robotic Pipeline Inspection

    Service: PureRobotics - Robotic Pipeline Inspection Client: City of Rockville Project Date: July 2010 Type of Pipeline: Water Transmission Main Diameter: 24-inch Pipe Material: PCCP Length: 53,000 feet Results: 3 pipe sections identified at risk Insertion of Pipeline Inspection Robot Pure Technologies (Pure) was contracted to provide robotic pipeline inspection ...


    By Pure Technologies

  • 16 Oxiperm Pro disinfection systems with flushing capacity for Messe München

    The exhibition organisers need to provide different amounts of domestic water for different kinds of exhibitors. For example, an IT industry exhibition needs a different amount of water to a watersports exhibition. This means that the domestic water pipes need to be designed on basis of the shows which need largest volumes of drinking water. With all sorts of different occupants in the Munich ...


  • WWTP Covers Its Grit Tanks to Help Address Odor Concerns

    The Customer: The Georgetown Wastewater Treatment Plant (WWTP) located in Ontario, Canada, provides industrial and municipal wastewater treatment for the urban area in the Town of Georgetown. The plant treats approximately 17.5 ML of wastewater per day. It is sized to accommodate the wastewater treatment needs of a local dairy processing facility, the plant’s largest industrial ...

  • In-pipe monitors turn dreams into reality

    In-pipe monitors turn dreams into reality The quality of tap water has improved enormously in recent decades, but for largely technological reasons, until recently, knowledge of water quality between the treatment works and the tap has been an almost impossible dream for water treatment and distribution network managers. In this article, Jo Cooper, Product Specialist at Intellitect Water, will ...


    By Intellitect Water Ltd

  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

  • Vibrating feeders for stockpiling and reclaim

    The expanding applications of vibratory feeders for controlling the flow of bulk materials, and their adaptation for processing requirements, have developed considerable interest in stockpiling and reclaim systems. The general design of these units consists of a material transporting trough, or platform, driven by a vibratory force system. The flexibility and variety of designs is limited only by ...


    By General Kinematics

  • New air quality rules challenge oil & natural gas industry

    EPA Administrator signed a suite of proposed new air regulations affecting both the Production/Processing and Transmission/Storage sectors of the oil and natural gas industry. The proposed rules mandate the use of emission controls as well as work practices through two different air regulatory programs – New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you