sewage flow sensor Articles

  • Effective monitoring improves sewage flow management case study

    SmartScan 50 introduces an effective solution for flow measurement of sewage water in one of Poland's municipal waste water treatment plant. The city of Zblewo, Poland provides waste water treatment services to its inhabitants. The plant sought an ultrasonic measurement solution for monitoring the raw sewage flow during the treatment process. The problems When entering the ...

  • AVFM 5.0 area-velocity flow meter monitors sewage lagoon discharge flow - Case Study

    The Township of South Glengarry in Eastern Ontario discharges continuously from their 72,000 m3 sewage lagoon. But they ran into flow measurement problems when their magnetic flowmeter was unable to detect seasonal low flow rates. Operations Manager, Shawn Killoran selected a Greyline AVFM 5.0 Area-Velocity Flow Monitor because it was simple to install in a horizontal discharge pipe from the ...


    By Greyline Instruments Inc.

  • Calibration using 5 flow sensors saves the effort of extensive reconstruction measures

    "Abwasserzweckverband Breisgauer Bucht", a municipal association for sewage treatment in the south of Germany, operates a central wastewater treatment plant for its members (29 communities and cities). The WWTP covers a catchment area of 650km² and its treatment capacity is 600.000 population equivalents. The plant is treating wastewater from 375.000 residents as well as from industry and ...


    By NIVUS GmbH

  • Wastewater engineers go with the flow

    The efficiency of maintenance work has been improved by water treatment engineers employing Intellisonde monitors in their final effluent. Designed primarily to measure water quality, the Intellisondes also measure flow, and this reading is being used to detect the accumulation of debris that necessitates a maintenance visit. Wastewater treatment efficiency is often measured by the analysis of ...


    By Intellitect Water Ltd

  • Continuous on-line monitoring of dissolved oxygen in the activated sludge of a sewage treatment plant

    Dissolved oxygen is traditionally measured using a Clark cell, which relies upon a gas-permeable membrane for its opera-tion. Such sensors are subject to fouling with subsequent loss of accuracy, making frequent maintenance and calibration necessary. The objective of this development was to take advantage of specific properties of microelectrode arrays, such as low flow-dependence, insensitivity ...


  • Typical Sensor Location Considerations

    The sensor mounting location within a space may be dependent on many variables. There are no specific formulas since each application will have it’s own determining factors and priorities. These include, but are not limited to: source of gas: Is the source a combustion exhaust from a vehicle or furnace or a vapour from a tank spill, pipe leak, or faulty valve? density of ...


    By Arjay Engineering Ltd.

  • Wet weather flow management

    For years, population explosion, demographic shifts, urbanization, aging infrastructure, limited water resources, and economic development have driven our water market, and with that our world’s need for total water solutions. ...


    By CH2M Hill Companies, Ltd.

  • Lagoon Discharge Flow Monitoring - Case Study

    Open Channel Flow Monitoring without a Flume or Weir Township operators liked the Greyline AVFM 5.0 datalogger reporting system where formatted flow reports (total, minimum, maximum and average) could be downloaded automatically to a USB memory stick without carrying a laptop to the site. The Township of South Glengarry in Eastern Ontario discharges continuously from their ...


    By Greyline Instruments Inc.

  • Dunstable sewage treatment plant steps up to mono nov for a complete extraction package

    Underlining its ability to supply either individual products or complete packaged systems for this type of application, Mono also provided two screw extractor systems and a single screw conveyor to partner an existingunit. The original step screen units installed on the Dunstable plant’s inlet flow had proved to be inefficient and unreliable. The replacement Discreen units now screen the inflow, ...

  • Portable Monitoring Instruments Solve Flow Rate Mystery - Case Study

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow. The Township started by video taping all of the lines ...


    By Greyline Instruments Inc.

  • OCF 5.0 open channel flow monitors - monitor infulent at Long Sault WWTP plant - Case Study

    Greyline Open Channel Flow Monitors were installed at the Wastewater Treatment Plant in Long Sault, Ontario when the SBR plant was originally commissioned in 1995. But after 16 years of continuous service, components for the old models became obsolete. Plant operators Caneau Water and Sewage Inc. decided to replace the instruments and new Greyline OCF 5.0 Open Channel Flow Monitors were installed ...


    By Greyline Instruments Inc.

  • Case study - Water accountability portable monitoring instruments solve flow rate mystery - Case Study

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow. The Township started by video taping all of the lines ...


    By Greyline Instruments Inc.

  • Open Channel Flow Monitors retired after 16 years continuous service - Case Study

    Long Sault WWTP Influent Flow Monitors Greyline Open Channel Flow Monitors were installed at the Wastewater Treatment Plant in Long Sault, Ontario when the SBR plant was originally commissioned in 1995. But after 16 years of continuous service, components for the old models became obsolete. Plant operators Caneau Water and Sewage Inc. decided to replace the instruments and new Greyline OCF ...


    By Greyline Instruments Inc.

  • Pump Station call outs a thing of the past - Case Study

    It’s 2:00 AM and a telephone rings in Eckville, Alberta. Rick McKinnon checks the display on his cell phone and groans. It’s another high level call out alarm from one of the town’s new sewage lift stations. He knows before he drives there that the system will be running on floats instead of the new ultrasonic level controller. ...


    By Greyline Instruments Inc.

  • Case study - Flowmeter troubleshooting at the township of North Glengarry - Case Study

    The Problem... The forcemain meter at the pump station read five times higher than the open channel flowmeter at the lagoon 2 km away. The Township needed to determine which of the two flow meters was reading incorrectly. Troubleshooting Forcemain Flow... First step was to evaluate performance of the 12” magmeter at the sewage pump station. The cost ...


    By Greyline Instruments Inc.

  • Turbidity Measurements in Drinking Water, Effluent Discharges and Coagulant Controlling

    This month at Partech Water Instruments we’re talking about our turbidity sensors—fantastic to use as an environmental indicator. So how can they be used? We’re here to tell you about turbidity sensors being utilised for drinking water, effluent discharges and coagulant controlling. Turbidity Sensors and Drinking Water Turbidity sensors ...


    By Partech (Electronics) Ltd.

  • Sewer Level Monitoring - Photos

    Sewer Level Monitoring - Photos Photos in this article present the complexity and versatility of sewer level monitoring. When examining the photos, pay special attention to the stand-alone autonomous characteristics of each installation. In lack of any cabling from the outside, whether data cables or power cables, the solution is fed from its own battery power supply. Data is tranmitted ...

  • Area-Velocity Flowmeter Installations in Denmark - Case Study

    Area-Velocity Flow Meters are designed to monitor flow rates in partially filled pipes and open channels without flumes or weirs. A sealed ultrasonic sensor is mounted on the bottom of the pipe or channel and connected to electronics through a watertight cable. The sensor measures both level and velocity and when calibrated with the pipe diameter or channel dimensions, the Greyline AVFM ...


    By Greyline Instruments Inc.

  • A sewer process model as planning and management tool – hydrogen sulfide simulation at catchment scale

    The collection system of a major city at the Persian Gulf was simulated for bulk water hydrogen sulfide and the release of sewer gas to the urban atmosphere. Geometry data on 870 km of sanitary sewer and data on dry weather flow entering all nodes in the catchment was exported from a Mike Urban database and imported to the sewer process model WATS. The process model then routed sewage and sewer ...


    By IWA Publishing

  • Use of In-Line Inaflatable Dams for CSO Control

    ABSTRACTThe Detroit Water and Sewerage Department (DWSD) recently installed thirteen (13) in-line insystem storage devices (ISDs) in large combined sewers in Dearborn, Detroit, Hamtramck and Highland Park, Michigan. The ISDs are designed to store combined sewage in the sewers during wet weather, especially during smaller storms that do not utilize the full transport capacity of the sewers. The ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you