sewer cleaning system Articles

  • Mono gives berger homes a lift

    The system, comprising a Mono Trihammer macerator and progressing cavity pump with single motor drive, overcomes the otherwise problematic geography of the site, in respect of sewage collection and transfer to the main sewer. The Grifter Packaged Pump system is installed in a compact, insulated, glass fibre, reinforced, plastic kiosk situated alongside the new building, and remains extremely ...

  • Hotel Grey Water/Process Water Reuse - Case Study

    Issue/Challenge A large resort in Mexico wanted to minimize the cost of their potable and process water used in their operations. The company had been using a single pass RO system from a well water source which provided permeate water to their water storage tank. This system was inefficient, producing only 50% of clean water production with the remaining 50% being sent to the municipal ...

  • Tortilla Plant

    Problem: A major tortilla plant, producer of corn and flour tortillas, tortilla strips and taco shells, was having problems with high levels of contaminants in their wastewater. Their major sources of waste are from their corn cooking operation and from their principal plant clean up performed twice a week. Although minor, boiler blow down and fryer cleaning are also waste sources for ...


    By HydroCal Inc.

  • Hyde ultrafiltration for tumbling/vibratory deburring applications

    Challenge Fabrication manufacturer has an issue with discharging tumbling water from two vibratory deburring systems. Customer Hartzell Manufacturing Industry Medical, Electronic and Bank Security Product Hyde Ultrafiltration System Business Benefits Realized ...


    By PRAB, Inc

  • Field campaign on sediment transport behaviour in a pressure main from pumping station to wastewater treatment plant in Berlin

    As part of the project KURAS, the Berliner Wasserbetriebe realized a field campaign in 2015 in order to increase the process knowledge regarding the behaviour of transported sediment in the pressure main leading from the pumpstation to the wastewater treatment plant. The field campaign was conducted because of a lack of knowledge about the general condition of the pressure main due to its bad ...


    By IWA Publishing

  • Auto Repair & Recycling Industry: Service and Scrap Business Saves Money, Stays True to `Green Roots`

    At Jeff’s Auto Body & Recycling Center Inc., old things become new again. Since 1978, Jeff Kurtz and his family have been restoring and fixing cars, as well as offering a variety of recycling services to Paxinos, PA, and surrounding communities. PROBLEM: In 2011, Kurtz realized that he could do more to clean up the wastewater run-off from the auto repair and service facility. In ...


    By Oil Skimmers, Inc.

  • Implementing an offline storage facility for Washington, D.C. suburbs in InfoWorks CS

    Wallingford Software’s InfoWorks CS solution has been used to enable the optimization of an offline storage facility to meet strict requirements for the Washington Suburban Sanitary Commission’s (WSSC) Rock Creek sewer basin sanitary system. The WSSC is the largest water and wastewater utility in the Washington, D.C. metropolitan area, providing services to 1.6 million residents of Montgomery and ...


    By Innovyze

  • Model Build the Smart Way

    Wallingford Software’s InfoNet is used widely now as a data repository for collection systems and water supply systems, with a number of applications for managing, accessing, and displaying that data. However, InfoNet has other uses, including preparing input for model building, specifically the building of collection system models. Richard Allitt Associates (RAA) has developed a specific process ...


    By Innovyze

  • The Challenge of the Future: Operating Emerging Disinfection Technologies

    ABSTRACTThe Clean Water Act (1972 and 1977) established the basis for regulating pollutant discharges into the waters of the United States. This Act contains many provisions regulating pollutant discharges and surface water quality in the United States. This act has also been modified by numerous revisions and amendments since it was enacted in 1972. The National Pollutant Discharge Elimination ...

  • Reasons to Choose Best Trenchless Pipe Bursting Repairing Equipment in Alameda, CA

    Keeping a home, nice, safe and clean may not be as simple as some homeowners may think. Even though the maintenance of the home is usually each family members responsibility and everyone can pitch in from time to time, there are times when the safety and cleanliness can be compromised by problems beyond their control. One of the more notable involves keeping the plumbing system in the home from ...


    By TRIC Tools Inc.

  • Recovery and Reuse of Filter Backwash Water: Coca-Cola Amatil

     Background The Coca Cola Amatil (CCA) Northmead plant in Sydney was established in 1972 and manufactures a wide range of world recognised Coca-Cola trademark soft drink products, such as Sprite, Fanta, Lift and Coca-Cola. The Northmead plant has one aluminium can line and two plastic PET bottle lines. It produced over 250 million litres of soft drink in 1995. ...


  • VSEP`s low operating cost and superior performance provide a high-tech alternative for oily wastewater processing

    A unique membrane filtration system has been installed at several major waste oil hauling operations and manufacturing plants that handle or produce oily wastewater. The system manufactured by New Logic, of Emeryville California near San Francisco, is also being used to process used crankcase waste oil and produce filtrate that can be sold as a higher value bunker oil. The V✧SEP, ...


    By New Logic Research, Inc.

  • Ivey-sol • SPT DNAPL - case study

    Ivey-sol • SPT Technology was successfully used to remediation of a commercial dry-cleaning facility. The subject facility had been in operational since ca. 1971. The DNAPL contamination was comprised of DCE (Dichloroethylene) and TCE (Trichloroethylene) dry-cleaning solvents. Some minor Brominated compounds were also detected. The impacts were limited to the soil and groundwater under the ...


    By Ivey International Inc.

  • Oil and grease manufacturer gets EPA approval

    Oil recovery system functions flawlessly for 30+ years Eugene Parker, plant manager for Jesco Resources (North Kansas City, MO.), a manufacturer of oil and grease, purchased the company’s first oil skimmer in 1978. One of his primary interests was to get immediate approval on the cleanliness of the company’s waste water from the Environmental Protection Agency (EPA). Parker needed an oil skimmer ...


    By Oil Skimmers, Inc.

  • Wastewater Reuse in Zinc Plating: Protectakote Pty Ltd

     Protectakote Pty Ltd has implemented a waste water recycling system at its Geelong facility which is saving it approximately $19,600 per annum and had a very attractive payback of 0.7 years, even without full qualification of all the benefits. Background Protectakote Pty Ltd (Protectakote) is a small metal plating and powder coating operation located in the Geelong region ...


  • R.J. Reynolds Tobacco Company - case study

    Application R.J. Reynolds Tobacco Company in Winston-Salem, North Carolina, operates a plating shop that produces chrome-plated cylinders that are etched by a proprietary mechanical process. The finished cylinders are then inked and used in the printing presses. Wastewater Description Wastewater contami-nates include Ar, Ba, Cd, Cr, Cu, Pb, Se, Ag and Zn. ...


  • Oil Skimmers Inc., solves environmental concerns for heavy equipment, maintenance and washdown facilities

    Beckwith Machinery Company of Murraysville, Pennsylvania, is one of the largest Caterpillar dealers in America, with 11 sales, service and manufacturing facilities in Pennsylvania and West Virginia. Beckwith's Cranberry, Pennsylvania facility also has a large rental business. When the machines are returned, many are loaded with mud, grease and oil. The mud can be removed simply by washing the ...


    By Oil Skimmers, Inc.

  • ACO’s comprehensive product range delivers value-engineered SUDS solution at new waste transfer station

    ACO Water Management's ability to supply products that cover every process required for sustainable drainage - Collect, Clean, Hold, Release - has delivered a comprehensive, value-engineered SUDS solution for J&J Stanley at its new waste transfer station in Newcastle upon Tyne. By working with a single team on the design of the entire system, the completed scheme - together with each ...


    By ACO Group

  • Membrane Bioreactor Pilot

    The problem A company which produces a product that requires a constant supply of relatively clean water is planning to expand by adding new process units online.  The plant currently uses well water as a supply to its production.  The water production from the well is limited.  They need to install a system to produce reuse water to reduce the amount of water required ...


    By Dynatec Systems Inc.

  • InfoNet Provides an Ideal Solution for CMOM and GASB 34 Compliance in the United States

    CMOM: a best practice framework CMOM (Capacity, Management, Operations, and Maintenance) is a flexible, dynamic set of regulations from the Environmental Protection Agency of the United States that enables municipalities and utilities to identify and implement accepted wastewater industry best practices and promote proactive asset management. It aims to achieve a number of goals: Better ...


    By Innovyze

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you