sewer cleaning system Articles

  • Integration of thermo scientific Sample manager lims and CSOLS remote sampler at northern Ireland water delivers enhanced audit trail, significant time and cost savings

    Northern Ireland Water (formerly Water Service) is the sole provider of water and sewerage services in Northern Ireland. It is a Government Owned Company (GoCo) set up in April 2007 to provide the water and sewerage services in Northern Ireland. There are approximately 795,000 domestic, agricultural, commercial and business properties in Northern Ireland connected to the public water supply and ...

  • Waste water treatment costs reduced by 50% with rotary vacuum precoat filter - Case Study

    Problem: The solids separation system at Lindc's waste water treatment facility had high operating, maintenance and sludge disposal costs. High operating costs were caused by the large pumps and special treatment chemical required to operate the filter, and frequent cleaning, repair and replacement of filter elements resulted in high maintenance costs. Union Carbide Corporation's Linde ...


    By Komline-Sanderson

  • Who Says Charity has to Cost Money?

    It is a rare and delightful occurrence when altruistic motives and the quest for profit coincide in such a way that following one begets the other.  The reuse and recycling of waste water is just such a project, especially in industrial applications replacing municipal potable drinking water supplies.  When one considers the fact that more than a billion people in the world are without ...

  • A Quick Solution: Modular Waste Water Treatment

    Rust corrodes materials and may lead to impurities. As a result, there is a demand across most sectors for components that are protected against corrosion. Cantin SA, headquartered in Domdidier in Switzerland, specializes in the metalworking of rust-proof materials. The company produces complete products and individual components for many different sectors, from medical technology through the ...


    By EnviroChemie GmbH

  • Dewatering of Industrial Sludge - Case Study

    At Ten Cate Protect, town of Nijverdal, The Netherlands, 2006 During the wastewater treatment process at Ten Cate Protect large quantities of sewage sludge are liberated. A couple of days per week this sludge is transported in tanker trucks to a waste disposal plant. On June 14th 2005 a Geotube MDS unit was put in operation at Ten Cate Protect to separate and condense the sludge of the aerobic ...

  • Geotextiles in Construction Dewatering

    Woven geotextiles work wonders in dewatering applications as wraps around well screens and sump pit screens. The textile can be sewn into sleeves or tubes to be slid over the well screen or sump pit framework. This technique allows the user to compensate for well screens with slots that are too large or for sump pit piping with large perforations. By adding the geotextile sleeves the user ...

  • Case study - Daphne utilities water reclamation facility

    With significant TSS and BOD reductions from their Salsnes Filter system, Daphne Utilities has restored previously lost plant capacity. More than that, loading reductions have cut back aerator maintenance and lowered energy consumption of blowers. Project Background Daphne Utilities, situated on the eastern shore of Mobile Bay in Alabama, provides water, sewer and natural ...

  • Benefits of Grease Traps for Restaurant kitchens

    Grease traps interceptors are composed mainly to solve the problem linked to grease retain under the drain pipes of the sink of kitchen. The amount of grease is more in restaurants kitchen or in commercial area kitchens as the foam load is no doubt in a great extent than residential ones. Grease trap for restaurant ...


    By Hydra International Ltd

  • An Introduction to Bioremediation and its Applications

    A variety of toxic chemicals, metals, and effluents are created and used in industrial processes. These elements need to be degraded to ensure that they do not harm the environment when disposed. A specialized process and equipment are required to perform this task. This is where bioremediation comes in. What is Bioremediation, and what are its Types? In simple ...


    By HPI Processes, Inc.

  • Case Study - KIA E-Coat Wastewater and Treatment Process

    KIA Automotive uses a water-borne Electrodepostion (E-Coat) paint process that produces various wastes including rinse waters containing Zinc (Zn), Nickel (Ni) & phosphorous (P) waste. Most of the waste is found in the rinse waters from the e-coat overflows that contain less 1000 mg/l TSS. Some of the “dumps” contain detactified paint waste concentrate in small quantities. The various ...

  • Constructed wetland for water quality improvement: a case study from Taiwan

    In Taiwan, more than 20% of the major rivers are mildly to heavily polluted by domestic, industrial, and agricultural wastewaters due to the low percentage of sewers connected to wastewater treatment plants. Thus, constructed or engineered wetlands have been adopted as the major alternatives to clean up polluted rivers. Constructed wetlands are also applied as the tertiary wastewater treatment ...


    By IWA Publishing

  • Model Testing Optimizes and Verifies Design of a 200-MGD Trench Wet Well for the Sugar Creek WWTP

    Charlotte-Mecklenburg Utilities (CMUD) and CDM are currently involved in the design of several treatment plant upgrades at the Sugar Creek wastewater treatment plant (WWTP) in Charlotte, North Carolina. Implementation of this project, which includes a 200-million-gallonper- day (mgd) screenings and influent pump station with dual self-cleaning trench-type wet wells, will provide CMUD with the ...

  • Komax teflon lined mixer simplifies acid injection for power plant

    A major source of waste water in many power plants is the waste stream that results from ion exchange used for demineralizing the boiler feed water. The alkaline regeneration waste stream produced by the ion exchange process requires the addition of an acid to this stream before discharge from the plant. Regulatory authorities typically require the effluent to have a near neutral pH before ...


    By Komax Systems, Inc.

  • Balancing growth and conservation - Precast concrete manholes become part of the stormwater solution

    When American Fork, Utah, decided to approve construction of a 175-acre commercial center, the city engineers had to consider the environmental effect it would have on a 45-acre wetland right next door. Under the EPA´s Phase II Storm Water Rules, adapted in late 1999, almost any city large enough to require a storm sewer system must balance growth with the environmental impacts of ...


    By BaySaver Technologies, Inc.

  • Ultrafiltration reclaims oily process water; reducing operating costs and environmental impact

    Challenge An industry-leading manufacturer of industrial-grade fastening systems discovers a better way to recycle  washwater - reducing fresh water consumption by 130,000 gallons annually and reclaim machining oil by using PRAB’s Ultrafiltration System. Even as demand for its product continued to increase, the manufacturer took the initiative to identify operational ...


    By PRAB, Inc

  • Evaporator Limits Boron to 5 PPM at award-winning chemical plant

    Problem: The biggest challenge confronting Rohm & Haas Corp. in building a wastewater plant for its chemical facility in Elma, Wash., was meeting Washington State Dept. of Ecology limitations on boron of 5 ppm. The Elma plant manufactures sodium borohydride, a versatile chemical used in a variety of applications ranging from the generation of sodium hydrosulfite for reductive bleaching of ...


    By Oil Skimmers, Inc.

  • Storm Water Plan Case Study

    Global was contracted by a local Road Commission site. The Road Commission site serves as the county level road agency, which maintains more than 1,813 miles of roads and streets and over 250 signalized intersections. The Road Commission contains six sites across the county. Each site is responsible for its particular area. The sites all include maintenance garages, diesel and gasoline ...

  • Slaughterhouse Industry: Easy-To-Use, Long-Lasting Oil Skimmers Effectively Remove Fats, Oils from Kill-Floor Wastewater

    For more than 20 years, J.W.Treuth & Sons Inc., a kosher slaughterhouse based in Baltimore County, M.D., has used a Model 5H Oil Skimmer from Oil Skimmers Inc. to remove fats, oil and grease (FOG) from kill-floor wastewater. The company recently purchased a new skimmer to replace the original, which, according to Vernon Treuth Sr., he purchased to correct FOG violations — the amounts of ...


    By Oil Skimmers, Inc.

  • Seal-Record in Essen, DE. case study

    The largest main collector within the jurisdiction of the Public Utility Company Essen has a nominal diameter of DN 3800. This main collectortown centre presented damages thatwere in need of redevelopment. After a thorough inspection, 33 leaky joints were selected for this pilot project and the company SMG Bautenschutztechnik fur Hoch und Tiefbau GmbH received the order. Project ...


    By AMEX GmbH

  • Rapid on-site analysis of fats, oil and grease (FOG)

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oils and Grease (FOG) or as much as 19 million gallons from 1998 to 2001 (State of North Carolina, 2004). Our increasingly mobile society has led to a decrease of cooking at home and a significant growth in the commercial food sector. This, on top of other industries such as metal processors, meat packers, cosmetic ...


    By Spectro Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you