sewer pipe test Articles

  • Sewer-Main Collection Pipe Joint Infiltration Testing and Life Cycle Cost Analysis

    ABSTRACTResearch ProjectsMajor members of the sewer-main pipe manufacturing industry and the University of Houston have completed and published the results of the following two research projects: The Sewer-Main Collection Pipe Joint Infiltration Testing research project that measured the water infiltration rate of water-tight designed 30-inch pipe joints. The joint tightness testing was ...

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • BOSS 2000 HDPE Storm Sewer Pipe, Stettler, AB

    Owner: Town of Stettler Installer: Woooden Construction Ltd. Designer: Associated Engineering Alberta Ltd. Location: 57 Street, Stettler, Alberta As part of a sanitary main replacement project, the Town of Stettler was faced with the challenge of replacing an aging storm sewer line under very low cover conditions. ...


    By Armtec

  • Sedimentation dynamics in combined sewer systems

    Sediments in combined sewers may negatively affect the performance of sewer systems and significantly promote the formation of hydrogen sulfide. To prevent this, German sewer systems are cleaned regularly but at high costs. In order to optimize the cleaning intervals, this study investigates how deposits build up and change over a defined period under constant conditions. The experiments were ...


    By IWA Publishing

  • Accepted Inspection Methods of Process Sewers.

    During the process of refining there is discharge of hazardous waste, this coupled with aging pipeline infrastructure creates a potential where waste can leak into the environment posing catastrophic threats to life. Federal agencies such as the EPA are beginning to penalize refineries that do not take necessary measures of disposing their waste. These refineries are subject to ...


    By EnTech Engineering, Inc

  • Valuing information for sewer replacement decisions

    Decision-making for sewer asset management is partially based on intuition and often lacks explicit argumentation, hampering decision transparency and reproducibility. This is not to be preferred in light of public accountability and cost-effectiveness. It is unknown to what extent each decision criterion is appreciated by decision-makers. Further insight into this relative importance improves ...


    By IWA Publishing

  • Quantitative pipe condition assessment with Pipe Penetrating Radar

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in / 450mm) non-ferrous (reinforced concrete, vitrified clay, PVC, HDPE, etc.) pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including voids ...


    By SewerVUE

  • Case study - Muskegon County - Sewer Force Mains

    Service: Sahara Client: Muskegon County Type of Pipeline: Sewer Force Main Diameter: 66-inch Pipe Material: PCCP Length: 8.5 miles 13.7 km In 2007, Muskegon County’s 35-year old large diameter wastewater force main failed catastrophically. Although historical data demonstrated that joint leakage had never contributed to previous events, extensive failure analysis of ...


    By Pure Technologies

  • Underground research for sewer optimization - Case Study

    Project Underground research for sewer optimization Client The local authority of Bergen in co-operation with Tauw Consultancy Country The Netherlands Background and objective The local authority of Bergen in North Holland wants to limit the management costs of the sewer system. The ...


    By Eijkelkamp Soil & Water

  • Particle velocity and sediment transport at the limit of deposition in sewers

    This paper focuses on the sediment particle while it is transported at the limit of deposition in storm sewers, i.e. as bed load at the limit of concentration that leads to sediment deposition. Although many empirical sediment transport equations are known in the literature, there is only limited knowledge concerning particle velocity. Sediment particle and sphere velocity measurements were ...


    By IWA Publishing

  • Installing gravity sewer in tough Georgia rock

    It took a contractor who was receptive to an innovative new installation approach, a good deal of patience and a whole lot of determination — after two previous attempts by other contractors using drills and air hammers were unsuccessful — to finally conquer a pesky 800-foot (243.8 m) stretch of tough Georgia blue granite. Hence, project owner Coweta County Water and Sewer Authority ...


    By Vermeer

  • Quantifying Sub-Surface Discharges from Individual Sewer Defects

    ABSTRACTThe California Regional Water Quality Control Board, Santa Ana Region (RWQCB) required wastewater collection agencies in Orange County to report discharges from “pipe breaks, leaking sewer pipes and joints, and other subsurface discharges of wastewater.” The Orange County Sanitation District (OCSD), in conjunction with a research team from University of California, Irvine (UCI), developed ...

  • Ability of Preissmann slot scheme to simulate smooth pressurisation transient in sewers

    Urban drainage networks are generally designed to operate in a free-surface flow condition. However, as a consequence of heavy rainfall events or network malfunctions, the filling of sewers (pressurisation) and network overflow may occur. Several modelling software products are commonly used to simulate floods in drainage networks, and their results are usually thought to be reliable and robust. ...


    By IWA Publishing

  • Rapid detection of sewer defects and blockages using acoustic-based instrumentation

    Sewer flooding incidents in the UK are being increasingly associated with the presence of blockages. Blockages are difficult to deal with as although there are locations where they are more likely to occur, they do occur intermittently. In order to manage sewer blockage pro-actively sewer managers need to be able to identify the location of blockages promptly. Traditional closed-circuit ...


    By IWA Publishing

  • BaSYS 8.0.2 – The Swiss pocket knife for handling sewer or fresh water networks

    An efficient and sustained management of sewer or fresh water systems is a significant task. Any problems with these systems can mean tremendous financial risk for owners and operators of these systems. Such problems can also present large environmental risks. To mitigate such risks a comprehensive application software is needed that can maintain such sewer and fresh water networks. Barthauer ...


    By Barthauer Software GmbH

  • Robot Device for Pipe Inspection - Case Study

    In 2005, Pure Technologies (Pure), a provider of various structural monitoring and leak-detection technologies, set about to develop a pipeline assessment tool that could monitor and report on the condition of pre-stressed concrete cylinder pipes (PCCP) utilized in municipal water and sewer systems. The tool’s competitive advantage would be accurate assessment decoupled from the need to ...


    By Pure Technologies

  • The challenges of creating a 250,000-pipe model for Miami-Dade

    Earth Tech has used InfoWorks WS to develop a record-breaking all-mains model of Miami-Dade’s water supply system in order to achieve an accurate representation of the entire distribution process. The new dynamic model covers the whole of the 250,000-pipe network, as well as all the associated facilities. 'One of the challenges was that we had to model the whole system - every single pipe,' says ...


    By Innovyze

  • Whole Effluent Toxicity Testing

    What is Whole Effluent Toxicity (WET) testing? Whole Effluent Toxicity (WET) testing is an important component of the U.S. Environmental Protection Agency’s (USEPA’s) integrated approach for detecting and addressing toxicity in surface waters. The National Pollutant Discharge  Elimination System (NPDES) permit program, authorized by the Clean Water Act, controls water pollution by ...

  • Applications of Pipe Penetrating Radar for Advanced Pipe Condition Assessments: the Clark Regional Wastewater District (WA) Case Study

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter non-metallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including voids outside ...


    By SewerVUE

  • Comparing the utility of decision trees and support vector machines when planning inspections of linear sewer infrastructure

    Closed-circuit television inspection technology is traditionally used to identify aging sewer pipes requiring rehabilitation. While these inspections provide essential information on the condition of pipes hidden from day-to-day view, they are expensive and often limited to small portions of an entire sewer system. Municipalities may benefit from utilizing predictive analytics to leverage ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you