shale shaker Articles

  • The use of oilfield shale shaker

    Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since drilling fluids solids control is vital in keeping down costs associated with the drilling ...


  • The purpose of using drilling shale shaker in oilfield

    The purpose of using drilling shale shaker is to remove the large cuttings in drilling fluid. Each set of solids control system must be equipped with a sufficient number of shale shaker to ensue the 100% processing rate of drilling fluid circulation. Shale shaker is the first solids control equipment to process and adjust the drilling fluid, ...


  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • KOSUN Decanting Centrifuges Sent to South Asia

    Recently, three KOSUN DC355 decanting centrifuges  ordered by a famous South Asian oil company have successfully arrived at Shenzhen Port for shipment. This is the second time for the customer to buy solids ...


  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • 25th Anniversary Product Release

    This year, KEMTRON Technologies is proud to celebrate 25 years of business. From the very beginning, KEMTRON has been providing quality, sophisticated solids control and waste management equipment to the oil and gas industry. This remarkable benchmark has been made possible by our unwavering commitment to our customers through offering durable value, now. For 2014, after intensive ...


    By Elgin Separation Solutions

  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Optimizing drilling efficiencies with a solids control system

    The correct solids control system can improve drilling rig efficiency, reduce costs and minimize the environmental footprint of your operation Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due ...

  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • maintenance of the vibrator motor for KOSUN decanter centrifuge

    Solids control system is the indispensable sector in oil & gas drilling oeration, consists of drilling fluids circulating tank, drilling fluids purification equipment where shale shaker,vacuum degasser,desander, desilter,decanter centrifuge,centrifugal&nbs ...


  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Drilling Mud in Horizontal Directional Crossing Project

    Horizontal Directional Crossing Project has a not long development in the country and even the world. But in recent years, pipeline horizontal directional crossing has been great development, large-scale construction of oil and gas pipelines across the length and across the diameter of the continuous creation of new records. In horizontal directional crossing project, the drilling mud play a very ...


  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you