shredder Articles

  • Invention of the Tire Shredder

    The process of vulcanizing rubber was discovered by Charles Goodyear (yes, you read that right) in 1839, and the development of rubber tires followed not long after (Source: Continental Truck). From there, it didn’t take long for worn-out tires to start piling up, and finding good ways to ...


    By ECO Green Equipment

  • From a 1m3 cubitainer to 50mm chips, using a two-shaft shredder? With SatrindTec, “Sí, es posible!”

    A Spanish manufacturer of HPDE cubitainers and containers based in Cataluña has chosen SatrindTech to implement its recycling line of defective cubitainers. The request received by our Sales Department was to replace an existing SatrindTech twin-shaft shredder, in use since the mid-1990s, to now be able to ensure a regular size of the shredded material. ...


    By SatrindTech Srl

  • Tire Shredding: Alternatives to Landfills

    For many reasons, whole tires pose a major problem to landfills. The most obvious is the inefficient use of space. The actual rubber of a tire takes up only a small fraction of the space a tire occupies, and the rest of the space is wasted. A less obvious but far more serious problem is that tires may trap methane gasses when buried with other garbage in landfills. When this happens, the tires ...


    By ECO Green Equipment

  • Shredder Types - Single shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which are generally high-speed systems. ...


    By Harden Industries Ltd.

  • Shredder Types - Two shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which ...


    By Harden Industries Ltd.

  • Shredder Cutters

    Different shredder cutters result in different material size. The shape and size of hooks on shredder cutters vary according to the type of material they are intended to grab. Generally, the higher the hook, the more material can be grabbed. With some materials this can increase production rate. But it is important ...


    By Harden Industries Ltd.

  • Shredder Types - Four shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which are generally high-speed systems. ...


    By Harden Industries Ltd.

  • China Shredder Group

    History of The China Shredder Group ( Chinashredder.com )   The China Shredder Group or Chinashredder.com, began its original operations in 1966 and is diversified all over China by 1993.    Today we announce the completion of our 40th, 41st and 42nd, dedicated shredder and recycling system manufacturing plants in Qingdao, Xian and Shanghai ...


    By China Shredder Company Ltd

  • The Features of Shear-type Shredder

    Shear-type Shredder is a kind of size-reduction equipment. ...


    By Harden Industries Ltd.

  • Dual Shaft Shredder

    ¡Dual shaft shredder for plastics/rubber scrap or other solid waste recycling. Harden double shaft shredder are being used for the recycling of plastic film, woven sacks, plastic drums, used computer and office machines, as well as wooden pallets. Harden Industries also supplies custom made ...


    By Harden Industries Ltd.

  • In the market for a new shredder or grinder?

    For recycling companies choosing a paper shredder or grinder is no easy task. One has to consider shaft designs, capacity, speed, screen sizes, etc. E-waste has complicated matters even further. Increasingly, recyclers are calling upon shredder manufacturers to design machines that can shred not only paper, but computer hard drives and other electronic equipment as well. In this article we’re ...

  • The WEIMA E-Rotor shredder

    WEIMA America has introduced the new “E-Rotor” WLK shredder.  The purpose of the new rotor is specifically for the recycling of film and fibrous materials.  This includes the historically tough to shred woven and non-woven fibers.  The design has also eliminated wrapping issues with thin gauge films & fibers which sometimes occurs with other rotor designs.  One of the ...


  • Tire Shredders: An Introduction

    How Does a Tire Shredding Machine Work? Tire shredding is a very common way of preparing scrap tires for disposal or recycle. In order to dispose of tires in a landfill, they must be shredded to various sized chips. The size required depends on the state or area you live in. Tire shredding is also used for recycling tires; crumb tire or tire mulch can be reused to create surfaces on ...


    By ECO Green Equipment

  • AXO Shredders Case Studies - Australia

    Brisbane based Security Shred Australia had been involved with mobile document shredding for several years, and was operating a low throughput mobile shredding truck. 'Our first truck shreds a maximum of 600kg's of paper per hour', says owner Nev Profke. While this throughput seemed good while we were building up the business, we soon got to its capacity, which meant we couldn't add new ...


    By AXO Shredders Ltd

  • AXO Shredders Case Studies - Switzerland

    When successful water-cooler entrepreneurs Yarom Ophir and Sid Apaydin were looking for new business ventures, they were attracted to the mobile document shredding industry. They saw several similarities with the water-cooler industry that they liked—a recurring revenue stream, business to business sales and a service that did not get affected by economic cycles. One of their key requirements ...


    By AXO Shredders Ltd

  • GIANT OTR mobile Tyre SHREDDER

    Arrowhead International LLC. is the first company to offer a portable giant OTR shredder capable of processing tires up to 63.5” bead diameters. This is ideal for recycling mining tyres on site. This shredder will shred whole giant OTR tires on site, which has never been done before. it is a high speed shredder capable of shreding 4-5 63.5" tyres ...


    By Arrowhead International

  • Jim Schwartz - connoisseur of wines and shredders

    He got involved in the recycling and shredder industry almost by accident. He would rather own a scrap yard than sell shredders. He prefers the Democrats over the Republicans, and Barack Obama over Hillary Clinton. He loves running marathons and drinking a good glass of wine, and has even managed to combine the two. Meet Jim Schwartz, a man who helped to shape the world shredder ...


    By Recycling International

  • Things to know about shredder sizing

    The right sized shredder is important. As shredder sales, they will, as a rule, recommend a shredder that ...


    By Harden Industries Ltd.

  • AXO Shredders Case Studies - UK

    Russell Richardson and Sons have observed their shredding business continuously improve since they commissioned an AXO WM 608 Mobile Document Shredding Machine from AXO Shredders. Having previously only provided off site shredding the AXO WM 608 Mobile Shredding System has allowed Jonathan Richardson to respond to and efficiently meet customers on site shredding requirements. High throughput and ...


    By AXO Shredders Ltd

  • AXO Shredders Case Studies - Japan

    The paper shredding industry in Japan, like Europe and North America, is experiencing continued growth. The related paper volume increases meant that many mobile shredding companies found their current machinery incapable of meeting growing demand. One such company was Kaneshiro Mobile Shredding “ By changing to the AXO WM 408 model we have increased our shredding performance to 1000kgs per hour ...


    By AXO Shredders Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you