shredder wear Articles

  • Fuel preparation technology – the latest safety considerations

    The specifications for new fuel preparation technologies are becoming increasingly sophisticated, as industry innovation continues apace. But when it comes to investing in waste shredders that help manufacture cement fuels, which criteria should top the procurement wish-list in 2018? With more than 25 years’ experience in this sector, Peter Streinik, head of UNTHA’s waste shredding ...


    By UNTHA Shredding Technology

  • The WEIMA E-Rotor shredder

    WEIMA America has introduced the new “E-Rotor” WLK shredder.  The purpose of the new rotor is specifically for the recycling of film and fibrous materials.  This includes the historically tough to shred woven and non-woven fibers.  The design has also eliminated wrapping issues with thin gauge films & fibers which sometimes occurs with other rotor designs.  One of the ...


  • New shredder boosts BPR’s destruction of confidential waste

    Waste management experts BPR Group has invested in a leading-edge shredder to improve the scope and security of its confidential paper destruction service. The company has installed the renowned UNTHA RS100 shredder at its Rainham facility in Greater London, enabling BPR to bring its shredding operation in-house rather than contract it out to a third party. BPR is now generating revenues of more ...


    By UNTHA UK LTD

  • Shredder for solid and thick-walled profiles and pipes

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, Sinsheim, (www.neue-herbold.com), extends their machinery range by a new 4-shaft shredder with force feeding system. The 4-shaft shredder type HZR 1300/4 is able to size-reduce solid chunks and start-up lumps, as well as thick-walled profiles and pipes up to a diameter of 1200 mm x 1200 mm and up to a length of 6000 mm. The size ...

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas Uriel, the ...


    By HSM GmbH + Co. KG

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas ...


    By HSM GmbH + Co. KG

  • UNTHA waste shredder for one of most state-of-the-art MPS systems in Europe

    MPS Betriebsführungs GmbH, based in Berlin, has been using a UNTHA XR3000R waste shredder since early October. The waste treatment plant, which is jointly operated by the ALBA Group and Berliner Stadtreinigung (Berlin’s municipal waste management company), specialises in the production of alternative fuels, and forms part of one of the most modern plants for mechanical-physical ...


    By UNTHA Shredding Technology

  • Cement production in the land of the Pharaohs case study

    LaFarge, worldwide-leading building materials producer with its head office in Paris has successfully installed a WEIMA PowerLine 3000 shredder in the cement works in El Sokna (Egypt) and commissioned this for processing secondary fuels. In the searing heat and surrounded by desert dust, the flexible and universal shredder shreds around 13 tons of material (mainly domestic and municipal waste ...


    By WEIMA

  • Transportable Waste Reduction Technology

    Several recent technological innovations have found their way onto Transportable Shredding Systems manufactured by Shred-Tech Inc. Reduction engineers have worked for years to find the right combination of knife material toughness, resistance to abrasive wear and shock load deformation. Shred-Tech’s engineers have found the right combination, which employs state of the art alloy plate and ...


    By Shred-Tech Corp.

  • Waste shredding protects resources in Indonesia - Case Study

    Cement production is among the core activities of building materials supplier Holcim. Holcim Ltd. can boast the most expansive geographical action radius in the global cements industry thanks to its subsidiaries in over 70 countries on all five continents. Recently, the company successfully inaugurated a modern recycling center in collaboration with its environmental technology partner Geocycle ...


    By WEIMA

  • For a clean Environment case study

    AmeyCespa is one of the leading providers of recycling, composting, anaerobic digestion and waste management services. The company combines the expertise of Amey, the UK’s leading public service provider, and Cespa, Spain’s major waste management company, which has over 40 years of expertise in the field. In Waterbeach, which is located only a few miles north of Cambridge (England), ...


    By WEIMA

  • Beyond Throughput

    If you are in the market for new or used Mobile Document Shredding (MDS) equipment, you need to understand your options. In the last decade, the MDS industry has gone through some major advancements. This alone makes it very important to consider all the features and capabilities of today’s MDS equipment. REACHING CAPACITY. The most common mistake made by consumers when selecting MDS ...


    By Shred-Tech Corp.

  • Size Reduction of Technical Plastics– Two-Stage Operations more Efficient than Single-Stage

    At HKR Kunststoffe GmbH in Langenbeutingen, technical plastics such as ABS, PBT, PC, POM, but primarily PA 6, PA 6.6, PA 12, PPA, LCP, etc. – particularly glass fibre reinforced types – are processed into high-grade regranulate. These materials accumulate as production waste in the plastics processing industry in the form of start-up chunks, sprues, rejects, etc. They are treated in two-stage ...


  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • How to Turn Waste Paper into Biomass Pellets

    How to Turn Waste Paper into Biomass Pellets Along with the development of human civilization, the number of waste paper has a gradually increase trend every year. It is seen everywhere. Many ways have been researched to recycle the waste paper, while the waste paper has been polluted and there are many toxic substances contained, so it is not good for ...


  • Size-reduction of thermoplastics reinforced by long and continuous filaments

    Material utilization of thermoplastics reinforced by long and continuous filaments to produce high-value, long-filament reinforced extrusion components requires a gentle size-reduction of the materials to be utilized into lumps of grinding stock in order to achieve a large as possible filament length. The properties of the components to be produced out of this grinding stock are determined by the ...


  • The results exceeded our expectations

    After using a Lindemann scrap shear type LU 1250/15 PA 90/25 intensively for 21 years at its headquarters in ’s-Gravendeel, the Dutch firm HKS Scrap Metals found that the machine’s hydraulic system was not functioning up to par, as is inevitable with any system subject to wear and tear. As a result, production had dropped significantly – from 35 t/h to 22 t/h. The year was 2010, ...


  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Growing the Composting and Organics Recycling Industry

    ORGANICS RECYCLING is a resource management system with a goal to utilize residuals to their greatest extent. For farmers, gardeners and landscapers, it means creating a compost product that economically and efficiently builds organic matter into soils and grows flourishing crops. For economic developers and ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you