single gas monitoring Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Planning for a Gas Monitoring System

    Do you need a gas monitoring system? Then you already know which gases you want to monitor, you probably have an idea of measurement ranges and accuracy requirements, and perhaps you have a budget for the system. But which other aspects have to be considered, and how do you actually design the system? ...


    By Opsis AB

  • Gas monitoring and leak detection in underwater application for the offshore oil and gas case study

    With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific ...


    By Franatech GmbH

  • A Comparison of Point Sensors and Open Path Monitors For Toxic Gas (esp. HF) Monitoring

    Point Sensors Ion Mobility Spectroscope (IMS) – a gas sample is ionized by a radioactive source (Ni63). Differences in ion drift under the influence of an applied electric field produce a spectrum that is dependent on the mass, charge, and shape of the component ions. The detector signal and strength is tuned to the drift time of the ion of interest (in this case HF) and signal strength is ...


    By Boreal Laser Inc.

  • Gas Concentration Monitoring in Sulfuric acid production

    Sulfuric acid (H2SO4) is a central substance in the chemical industry. Principal uses include mineral processing, fertilizer manufacturing, oil refining, wastewater ...


    By Opsis AB

  • Gas process automation

    Problem: Many relatively simple industrial or laboratory processes that require control of flow or pressure can be greatly improved with automation. Using a mass flow controller to control a certain gas flow rate, for instance, is far more precise and has a faster speed of response than manually adjusting a needle valve while consulting a pressure gage. Such processes can be automated ...


    By Sierra Instruments, Inc.

  • Improved HF monitoring in Primary Aluminium Smelters with Laser Gas Detectors

    Primary aluminium smelting generates large amounts of hydrogen fluoride gas (HF). Concerns for worker safety and ambient air quality require that HF be monitored at several locations in smelters. Historically, a variety of methods have been used for HF monitoring. Cassette samplers and wet chemistry techniques, coupled with complex and expensive ...


    By Boreal Laser Inc.

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • BTEX monitor, equal performances to laboratory chromatographs

    Environnement S.A leveraged its technical leadership in this field with an extensive experience, being one of the first companies creating its first BTEX analyser almost 20 years ago. The VOC72M third generation of ...


    By ENVEA

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Ltd

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Ltd

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Double benefit of monitoring Indoor Air Quality (IAQ)

    It is a difficult balance to save money and energy yet maintain a comfortable and healthy indoor air environment. A logical solution to controlling indoor air pollution is good ventilation coupled with IAQ monitoring using gas sensors. This can ensure healthy indoor air as well as a more efficient HVAC system.  Typical IAQ investigation and examination consists of taking single-point ...


    By PPM Technology

  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Suddenly greenhouse gas regulations

    FROM a whisper to a scream, from 0 to 60 in 4 seconds or less, whether you prefer music metaphors or car metaphors, all of a sudden it seems that regulation of greenhouse gases (GHGs) is about to descend upon us. My reading list on the plane today includes the new U.S. Environmental Protection Agency GHG reporting requirements, a draft protocol from the California Climate Action Registry (CCAR) ...


    By BioCycle Magazine

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you