single path monitor Articles

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • A Comparison of Point Sensors and Open Path Monitors For Toxic Gas (esp. HF) Monitoring

    Point Sensors Ion Mobility Spectroscope (IMS) – a gas sample is ionized by a radioactive source (Ni63). Differences in ion drift under the influence of an applied electric field produce a spectrum that is dependent on the mass, charge, and shape of the component ions. The detector signal and strength is tuned to the drift time of the ion of interest (in this case HF) and signal strength is ...


    By Boreal Laser Inc.

  • Nitrogen and carbon removal thanks to bacterial processes in a single stadium system ( PRiBioAC 3S ) in wastewaters with high organic and nitrose load

    Biologic procedure for nitrogen and carbon removal in a single step system (PriBioAC 3S) from zootechnical sewage with an high organic and nitrogen level. A solution for nitrate problem Paolo Broglio (paolo.broglio@ecologia-applicata.it) - Ecologia Applicata S.r.l. Services for Ecology Scientific Organization of Environmental ...


  • Improved HF monitoring in Primary Aluminium Smelters with Laser Gas Detectors

    Primary aluminium smelting generates large amounts of hydrogen fluoride gas (HF). Concerns for worker safety and ambient air quality require that HF be monitored at several locations in smelters. Historically, a variety of methods have been used for HF monitoring. Cassette samplers and wet chemistry techniques, coupled with complex and expensive ...


    By Boreal Laser Inc.

  • Infiltration Testing for Hydraulic Conductivity of Soil Liners

    This paper describes the use of single ring infiltrometers for evaluating the hydraulic conductivity of compacted soil liners. Procedures are presented for installation and monitoring of infiltrometers in the field. Results of hydraulic conductivity estimated from infiltrometer tests on six laboratory model liners are presented and compared with the results of conventional laboratory tests. In ...


    By ASTM International

  • Ambient Air Fence Line Application case study

    Customer: Confidential Application: Ambient air Fenceline application Background: The Victoria Environmental Protection Agency installed an Opsis DOAS open path system to measure Benzene & ...


    By Ecotech Pty Ltd

  • Measuring SO2 ship emissions with an ultraviolet imaging camera

    Over the last few years fast-sampling ultraviolet (UV) imaging cameras have been developed for use in measuring SO2 emissions from industrial sources (e.g. power plants; typical emission rates ~ 1–10 kg s−1) and natural sources (e.g. volcanoes; typical emission rates ~ 10–100 kg s−1). Generally, measurements have been made from sources rich in SO2 with high concentrations ...

  • Impact of sound attenuation by suspended sediment on ADCP backscatter calibrations

    Abstract. Although designed for velocity measurements, acoustic Doppler current profilers (ADCPs) are widely being used to monitor suspended particulate matter in rivers and in marine environments. To quantify mass concentrations of suspended matter, ADCP backscatter is generally calibrated with in situ measurements. ADCP backscatter calibrations are often highly site-specific and season ...


    By Teledyne RD Instruments

  • Emulsified-Oil Biobarrier Provides Long-Term Treatment of Perchlorate/VOC Plume

    Security Technology Certification Program (ESTCP) evaluation of a PRB containing emulsified oil substrate (EOS®). The pilot study was initiated in 2003 at the Alliant Techsystems, Inc., facility in Elkton, MD, to evaluate effectiveness of EOS technology for enhancing biodegration of perchlorate and chlorinated solvents. A single dose of low solubility, low viscosity, and slowly biodegradable ...


    By EOS Remediation, LLC

  • IRGAS XFlo: process gas FTIR system for flange mounted applications

    Introduction When doing process tool or exhaust abatement tool installations, it is desirable to monitor the exhaust gases as a means of controlling or setting up the tool 1, 2. FTIR, with its rapid analysis speed, high sensitivity, and ease of use, offers one means of monitoring such systems at the time of installation and during the working life of the tool. Often, these applications ...


    By CIC Photonics, Inc.

  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Sampling moisture in the soil profile

    Patterns of water replenishment and use give rise to large spatial variations in soil moisture over the depth of the soil profile. Accurate measurements of profile water content are therefore the basis of any water budget study. When monitored accurately, profile measurements show the rates of water use, amounts of deep percolation, and amounts of water stored for plant use.Experimental ...


    By Decagon Devices, Inc.

  • US EPA UVGDM 2006 validated UV systems

    As micro-organisms evolve, so too does their resistance against traditional methods of treatment. atg UV has developed a range of validated systems that fully comply with the requirements of the US EPA 2006 UVDGM (worlds' strictest validation standard).  atg UV Technology has a range of UV systems that have been designed specifically for the drinking water industry, and are fully compliant ...


    By atg UV Technology

  • Detection and measurement of GWGs in semiconductor fab facilities

    Problem Statement Various processes and tools in the modern wafer fab plant produce effluent streams that contain unacceptably high levels of perfluorocarbon GWGs (greenhouse warming gases). These effluent streams are abated by plasma incineration and wet scrubbers and other techniques. It is necessary to measure the destruction removal efficiency (DRE) of the various abatement methods ...


    By CIC Photonics, Inc.

  • New chip captures power from multiple sources

    System developed at MIT could combine power harvested from light, heat and vibrations to run monitoring systems. Written by David L. Chandler, MIT News Office.You can read the original new in MIT NewsResearchers at MIT have taken a significant step toward ...

  • Case study - Anglian water Cryptosoridium outbreak

    Pitsford Drinking Water Site, England In June 2008, a rabbit was located in the wash water tank at the Pitsford Drinking Water Plant of Anglian Water, leading to contamination of the treatment works with Cryptosporidum, a chlorine resistant parasitic micro-organism. The parasite was detected on June 24 and, following consultation with health and local authorities, a notice to boil ...


    By atg UV Technology

  • White Paper: ANSI N13.1-2011 Stack Sampling Considerations

    Background Nuclear facilities are required to follow industry standards for sampling stack effluents. Exposure of the general public to released radionuclides must be monitored as specified in US governmental regulations. The United States Environmental Protection Agency (USEPA) and the United States Nuclear Regulatory Commission (USNRC) have the authority over the monitoring of these ...

  • Culture – the key to sustainable process safety performance

    What is culture? Some companies wonder why they keep experiencing the same process safety problems. Others wonder why they have plateaued in process safety performance. Culture is KEY. It is the individual and organizational 'DNA' that represents our tendency to want to do (1) the right thing (2) in the right way (3) at the right time, (4) ALL the time – even when no one is looking.The safety ...


    By ABS Consulting

  • Down-hole tomography

    This is a collection of various cases where the 2D resistivity imaging method pioneered by Advanced Geosciences Inc have been successfully applied. Click on a section below and you will be shown a full 2D resistivity imaging brochure detailing the ...


    By Advanced Geosciences, Inc.

  • Identifying Leaks from Natural Gas Pipelines at a Safe Distance

    The use of natural gas, of which methane is the principle component, is increasing worldwide. According to the American Petroleum Institute methane meets 24% of U.S. energy demand and heats over 50% of all U.S. households. It also has many industrial uses, such as the manufacture of chemicals like ammonia, methanol, butane, ethane, propane and acetic acid; it is also an ingredient in products as ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you