single rotor waste shredder Articles

  • Zuser - Polaris 2800 - With Lindner, you know what you’re getting - Case Study

    Zuser Ressourcenmanagement GmbH is not keen on experiments: for the past 24 years the RDF producer in Peggau, Austria has bought shredders made by Lindner Recyclingtech. The new addition to the family is a Polaris 2800. For one-step shredding every other machine was simply out of the question. The cooperation with Lindner dates back to a time before Mag. Georg Zuser became CEO of the Zuser ...


    By Lindner-Recyclingtech GmbH

  • New single-shaft waste shredder set to take UK by storm

    Riverside Waste Machinery – one of the country’s leading providers of waste balers and shredders – is set to take the waste management industry by storm this summer when it introduces a powerful new innovation in single-shaft engineering to the UK marketplace. Hot on the heels of the successful TR launch ...


    By UNTHA UK LTD

  • Innovation and Investment Key to Success for Yorwaste (Waste shredder case study)

    With the opening of its new Solid Recovered Fuel (SRF) facility at the end of 2012, waste and recycling company Yorwaste is supporting a step-change within the UK waste industry with a shift in focus from waste processing to profitable fuel production. It is widely acknowledged that the UK must do more to reduce its landfill contributions and instead harness energy from waste – developing ...


    By UNTHA UK LTD

  • KAB - Polaris 2800 - Polaris Single-Shaft Shredder from Lindner optimizes the one-step processing of refuse-derived fuel - Case Study

    The Polaris 2200 and 2800 are two new single-shaft shredders from Lindner that have been optimized for the cost-efficient, single-step shredding of untreated household refuse as well as industrial and commercial waste. A typical application area is the processing of refuse-derived fuel (RDF) that is used instead of fossil fuels in calciners of cement factories or in thermal power plants. Because ...


    By Lindner-Recyclingtech GmbH

  • Holcim: SRF production with UNTHA shredders in Vietnam

    Work is underway to commission a Solid Recovered Fuel (SRF) manufacturing plant in Vietnam, for one of the world’s leading cement and aggregates specialists, Holcim. The plant will process solid footwear production waste from the country’s main shoe factory, to create a fossil fuel substitute that will power Holcim’s local cement kiln calciner. Following a global ...

  • Size Reduction of Technical Plastics– Two-Stage Operations more Efficient than Single-Stage

    At HKR Kunststoffe GmbH in Langenbeutingen, technical plastics such as ABS, PBT, PC, POM, but primarily PA 6, PA 6.6, PA 12, PPA, LCP, etc. – particularly glass fibre reinforced types – are processed into high-grade regranulate. These materials accumulate as production waste in the plastics processing industry in the form of start-up chunks, sprues, rejects, etc. They are treated in two-stage ...


  • A Lindner Universal Shredder guarantees the safe eradication of top-secret data - Case Study

    Since the end of 2014, a Lindner Recyclingtech Micromat 2000 single-shaft, universal shredder has been in successful operation for REISSWOLF Akten- und Datenvernichtung GmbH in Frankfurt, Germany. At the company, documents and data carriers containing strictly confidential information are destroyed and the high throughput performance and reliable process stability provided by Lindner technology ...


    By Lindner-Recyclingtech GmbH

  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Film waste? Don`t take it to the landfill - Case Study

    Recently, True Plastics Recycling, based in Carrollton, Texas, successfully commissioned a new recycling system, consisting of a WEIMA WLK 20 Jumbo single-shaft shredder and a Gamma Meccanica GM 180 recycling system to reuse industrial film. In 2012, Mike Largent, a young entrepreneur, established his own company in Carrollton, North-East of the Texan metropolis Dallas, the center of the US oil ...


    By WEIMA

  • Tissue manufacturer uses WEIMA machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • Tissue Manufacturer Uses WEIMA Machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • Recycling all kinds of plastic waste: Lindner‘s tailor-made re-grinding line boosts output and growth for Winco Plastics - Case Study

    Winco Plastics, North Aurora, IL/USA, a subdivision of Winco Trading (is one of the largest full service plastic recycling companies in the Midwest with 30 years’ experience. After purchasing a Lindner re-grinding line including a Micromat Plus 2500 pre-shredding system and an LG 1500-800 grinder, Winco have significantly increased their plastics waste handling capacity, making them one of ...


    By Lindner-Recyclingtech GmbH

  • Cement production in the land of the Pharaohs case study

    LaFarge, worldwide-leading building materials producer with its head office in Paris has successfully installed a WEIMA PowerLine 3000 shredder in the cement works in El Sokna (Egypt) and commissioned this for processing secondary fuels. In the searing heat and surrounded by desert dust, the flexible and universal shredder shreds around 13 tons of material (mainly domestic and municipal waste ...


    By WEIMA

  • Highly recommended case study

    Füllgraf GmbH & Co. Möbelwerkstätten und Küchenstudio KG with its registered office in Bad Arolsen is self sufficient – at least when it comes to heating its production hall and the adjacent exhibition rooms together with the administrative offices. The company with its over 60 years of history uses the WL 4 single-shaft shredder from WEIMA Maschinenbau GmbH of ...


    By WEIMA

  • IBC container shredding in Manchester case study

    The Manchester (England)-based company Reckon Packaging Limited is a leading manufacturer of HDPE synthetic containers in the United Kingdom. A WLK 15 shredder from WEIMA was recently commissioned there. The aim was to efficiently shred and recycle IBCs that could not be reused. Industrial Bulk Containers (IBCs) are used mainly in the chemical, food and pharmaceutics industries. Recon Packaging ...


    By WEIMA

  • CANDI Plastic opts for new QR-class for material recycling

    First real-life application for the UNTHA QR-class: In July this year, CANDI Plastic Recycling began using a QR1700 shredder for ...

  • Shredding at sea case study

    The 'Solitaire'of theAllseas Group is the world’s largest and most modern offshore pipe-laying ship. It helps to lay an average of five kilometres of underwater pipeline every day. Synthetic end caps accumulating as waste will be shredded by a WLK 10 shredder from WEIMA Maschinenbau GmbH while still on the ship in order to sell the valuable raw material once on land. The 368 m long and 40 ...


    By WEIMA

  • Paper resizing for baling

    The Wesendrup-AVU-Recycling GmbH & Co., Wetter/Germany, operate a processing plant for waste paper where residual substances from newspaper facilities and companies in the paper-converting industry are pressed into uniform bales and conditioned for the further processing. The heart and essential item of this ultra-modern processing plant is the single-rotor shredder type WLK 18 Super-Jumbo of ...


  • For a clean Environment case study

    AmeyCespa is one of the leading providers of recycling, composting, anaerobic digestion and waste management services. The company combines the expertise of Amey, the UK’s leading public service provider, and Cespa, Spain’s major waste management company, which has over 40 years of expertise in the field. In Waterbeach, which is located only a few miles north of Cambridge (England), ...


    By WEIMA

  • UNTHA – specialists in RDF and SRF shredding

    Prevention of waste at source is obviously the preferable scenario, but for as long as households continue to fill their bins with rubbish, for as long as companies dismiss the duty they have to reduce the waste they produce, and for as long as countries continue to burn fossil fuels for energy, nations must look at smarter ways to utilise their waste. Companies involved in the engineering and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you