single shaft waste shredder Articles

  • New single-shaft waste shredder set to take UK by storm

    Riverside Waste Machinery – one of the country’s leading providers of waste balers and shredders – is set to take the waste management industry by storm this summer when it introduces a powerful new innovation in single-shaft engineering to the UK marketplace. Hot on the heels of the successful TR launch ...


    By UNTHA UK LTD

  • New Single Shaft Series

    SatrindTech S.r.l. has manufactured the new serie of Single Shaft shredders. From plastic to municipal solid waste: the perfect solution. Designed to treat different types of materials, the Single Shaft Shredders are customized to ensure the maximum production capacity. A strong structure ensures long life, reaffirming the reliability of the SatrindTech machines. ...


    By SatrindTech Srl

  • KAB - Polaris 2800 - Polaris Single-Shaft Shredder from Lindner optimizes the one-step processing of refuse-derived fuel - Case Study

    The Polaris 2200 and 2800 are two new single-shaft shredders from Lindner that have been optimized for the cost-efficient, single-step shredding of untreated household refuse as well as industrial and commercial waste. A typical application area is the processing of refuse-derived fuel (RDF) that is used instead of fossil fuels in calciners of cement factories or in thermal power plants. Because ...


    By Lindner-Recyclingtech GmbH

  • New shredder boosts BPR’s destruction of confidential waste

    Waste management experts BPR Group has invested in a leading-edge shredder to improve the scope and security of its confidential paper destruction service. The company has installed the renowned UNTHA RS100 shredder at its Rainham facility in Greater London, enabling BPR to bring its shredding operation in-house rather than contract it out to a third party. BPR is now generating revenues of more ...


    By UNTHA UK LTD

  • Innovation and Investment Key to Success for Yorwaste (Waste shredder case study)

    With the opening of its new Solid Recovered Fuel (SRF) facility at the end of 2012, waste and recycling company Yorwaste is supporting a step-change within the UK waste industry with a shift in focus from waste processing to profitable fuel production. It is widely acknowledged that the UK must do more to reduce its landfill contributions and instead harness energy from waste – developing ...


    By UNTHA UK LTD

  • Holcim: SRF production with UNTHA shredders in Vietnam

    Work is underway to commission a Solid Recovered Fuel (SRF) manufacturing plant in Vietnam, for one of the world’s leading cement and aggregates specialists, Holcim. The plant will process solid footwear production waste from the country’s main shoe factory, to create a fossil fuel substitute that will power Holcim’s local cement kiln calciner. Following a global ...

  • RDF production at Delete Oy with UNTHA shredders

    UNTHA’s complete RDF system strengthens Delete’s waste to energy commitment When environmental services specialist Delete needed a new alternative fuel production system for its site in Tampere, central Finland, the €100million turnover company turned to Austrian-based UNTHA. Now manufacturing more than 20 tonnes of 80mm RDF an hour, ...

  • Size Reduction of Technical Plastics– Two-Stage Operations more Efficient than Single-Stage

    At HKR Kunststoffe GmbH in Langenbeutingen, technical plastics such as ABS, PBT, PC, POM, but primarily PA 6, PA 6.6, PA 12, PPA, LCP, etc. – particularly glass fibre reinforced types – are processed into high-grade regranulate. These materials accumulate as production waste in the plastics processing industry in the form of start-up chunks, sprues, rejects, etc. They are treated in two-stage ...


  • Solidification / Immobilisation of hazardous waste for subterranean storage

    The use of subterranean salt mines for the final storage of inorganic hazardous waste is state of the art in Germany, and in fact most other European countries. However, the technical requirements to prepare the waste in an appropriate way are quite challenging. Over ten years ago econ supplied a plant to a salt mine in eastern Germany. The plant uses econ’s unique batch-wise working mixing ...

  • A Lindner Universal Shredder guarantees the safe eradication of top-secret data - Case Study

    Since the end of 2014, a Lindner Recyclingtech Micromat 2000 single-shaft, universal shredder has been in successful operation for REISSWOLF Akten- und Datenvernichtung GmbH in Frankfurt, Germany. At the company, documents and data carriers containing strictly confidential information are destroyed and the high throughput performance and reliable process stability provided by Lindner technology ...


    By Lindner-Recyclingtech GmbH

  • Film waste? Don`t take it to the landfill - Case Study

    Recently, True Plastics Recycling, based in Carrollton, Texas, successfully commissioned a new recycling system, consisting of a WEIMA WLK 20 Jumbo single-shaft shredder and a Gamma Meccanica GM 180 recycling system to reuse industrial film. In 2012, Mike Largent, a young entrepreneur, established his own company in Carrollton, North-East of the Texan metropolis Dallas, the center of the US oil ...


    By WEIMA

  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Tissue manufacturer uses WEIMA machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • Tissue Manufacturer Uses WEIMA Machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • Recycling all kinds of plastic waste: Lindner‘s tailor-made re-grinding line boosts output and growth for Winco Plastics - Case Study

    Winco Plastics, North Aurora, IL/USA, a subdivision of Winco Trading (is one of the largest full service plastic recycling companies in the Midwest with 30 years’ experience. After purchasing a Lindner re-grinding line including a Micromat Plus 2500 pre-shredding system and an LG 1500-800 grinder, Winco have significantly increased their plastics waste handling capacity, making them one of ...


    By Lindner-Recyclingtech GmbH

  • Cement production in the land of the Pharaohs case study

    LaFarge, worldwide-leading building materials producer with its head office in Paris has successfully installed a WEIMA PowerLine 3000 shredder in the cement works in El Sokna (Egypt) and commissioned this for processing secondary fuels. In the searing heat and surrounded by desert dust, the flexible and universal shredder shreds around 13 tons of material (mainly domestic and municipal waste ...


    By WEIMA

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...

  • Shredding at sea case study

    The 'Solitaire'of theAllseas Group is the world’s largest and most modern offshore pipe-laying ship. It helps to lay an average of five kilometres of underwater pipeline every day. Synthetic end caps accumulating as waste will be shredded by a WLK 10 shredder from WEIMA Maschinenbau GmbH while still on the ship in order to sell the valuable raw material once on land. The 368 m long and 40 ...


    By WEIMA

  • Florida-based BlueLinx makes cash from wood scrap - Case Study

    Headquartered out of Atlanta, Georgia, BlueLinx Co. is a renowned manufacturer of wood components and building products in North America. The Lake City, Florida plant is just one of the company’s forty-eight distribution centers and is home to forty-two employees including technicians and sales representatives for the corporation. BlueLinx of Lake City noticed a significant amount of scrap ...


    By WEIMA

  • Zuser - Polaris 2800 - With Lindner, you know what you’re getting - Case Study

    Zuser Ressourcenmanagement GmbH is not keen on experiments: for the past 24 years the RDF producer in Peggau, Austria has bought shredders made by Lindner Recyclingtech. The new addition to the family is a Polaris 2800. For one-step shredding every other machine was simply out of the question. The cooperation with Lindner dates back to a time before Mag. Georg Zuser became CEO of the Zuser ...


    By Lindner-Recyclingtech GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you