singlet-oxygen analyzer Articles

  • December BioCycle World

    Economic Impact Of Recycling In Texas The Texas Commission on Environmental Quality (TCEQ) released its recent study on the economic impact of recycling activities in the state. Approximately 9.2 million tons of MSW designated materials were recycled in Texas in 2015. Typical recyclables (paper, plastics, metal, and glass), organics (yard trimmings, brush, green waste, and food and ...


    By BioCycle Magazine

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • PeCOD® Analyzer oxygen demand analysis for source & treated drinking waters

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the ...


    By MANTECH Inc.

  • PeCOD® Analyzer 15-minute chemical oxygen demand (C0D) analysis

    The revolutionary PeCOD® Analyzer technology provides Chemical Oxygen Demand results in under 15 minutes in a Simple-Safe-Effective manner. With our mercury and dichromate free chemistry installed in over 20 countries, the PeCOD® Analyzer has delivered successful test monitoring of COD in a variety of environments with our approved and published MOECC method  Through our proprietary ...


    By MANTECH Inc.

  • TOC analyzer for airports

    During winter, de-icing processes at airports necessitate storm water and de-icing water management. Especially due to adhesive (sticky) substances, strongly fluctuating concentrations and a lot of chemicals, the monitoring systems itself must be tailor-made to fight this water analysis challenge. LAR 's ...


    By LAR Process Analysers AG

  • Assessing performance of on-line nitrate analyzers

    Traditionally, activated sludge processes were designed to remove organics and suspended solids from wastewater. The justification for including nitrogen control in wastewater treatment facilities began with the need to protect receiving waters from the increasing problem of eutrophication and hypoxia (low levels of dissolved oxygen in bottom waters, generally less than 2 mg/l). One of the ...

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Analyzing for Trace CO and CO2 using a Total Hydrocarbon Analyzer

    Untitled Document The purity of Specialty Gases is determined by the measurement of various contaminants including Total Hydrocarbons. Low level measurements of carbon ...


    By AMETEK MOCON - Baseline

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • Analyzing sulfur in soil and sediment with handheld XRF

    Background Sulfur creates more than nasty odors. Exposure to low levels (0-10ppm) of hydrogen sulfide (H2S) causes irritation of eyes, nose, and throat; higher levels can cause headaches, dizziness, nausea and vomiting, coughing, and breathing difficulty. H2S and numerous other odor-causing compounds are generated as a result of organic material decomposition. In the case of the Muddy River in ...

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • What is Chemical Oxygen Demand (COD)?

    Chemical Oxygen Demand (COD) analysis is a measurement of the oxygen-depletion capacity of a water sample contaminated with organic waste matter. Specifically, it measures the equivalent amount of oxygen required to chemically oxidize organic compounds in water. Why Measure COD? COD is used as a general indicator of water quality and is an integral part of all water quality ...


    By MANTECH Inc.

  • AquaLab Analyzer provides real-time phosphorus measurement in Everglades

    When it comes to ecosystem sustainability, Florida is no backwater. The South Florida Water Management District, which includes the unique Everglades habitat, had a major challenge. The EPA and various governmental authorities have defined limits for many water quality parameters to support a water body’s designated use. Any physical, chemical or biological condition that threatens the designated ...

  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...


    By ASA Analytics

  • Chemical Oxygen Demand and Biochemical Oxygen Demand results in 15 minutes - Case Study

    Arauco, a Chilean pulp and paper company, has been using a PeCOD® Analyzer in full-scale operations since 2013. As a result, the company has reduced the use of hypochlorite in its bleaching processes with no loss of product quality, and decreased the amount of organics in its wastewater stream. The net result was a further reduction in chemicals and energy used in water treatment that saved ...


    By MANTECH Inc.

  • Real-time O2 monitoring in VCM plants using the In-situ laser gas analyzer – Case Study

    Vinyl Chloride Monomer (VCM) Vinyl Chloride Monomer is a colorless, flammable gas. It is of very great importance as feedstock in the production of polyvinyl chloride (PVC), one of the world´s most versatile thermoplastics. Originally, acetylene has been used as feedstock for VCM production but was replaced stepwise by the inexpensive ethylene. Complete changeover to almost ...

  • Patented method for oxygen permeation analysis of food packaging

    The PermMate utilizes an innovative method of oxygen permeation analysis of finished packages - ‘Ambient Oxygen Ingress Rate’ (AOIR). Providing the ability to test the oxygen permeability of packages under different test conditions including how the product ...


    By Systech Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you