sizing shredder Articles

  • Things to know about shredder sizing

    The right sized shredder is important. As shredder sales, they will, as a rule, recommend a shredder that ...


    By Harden Industries Ltd.

  • Shredder Cutters

    Different shredder cutters result in different material size. The shape and size of hooks on shredder cutters vary according to the type of material they are intended to grab. Generally, the higher the hook, the more material can be grabbed. With some materials this can increase production rate. But it is important ...


    By Harden Industries Ltd.

  • Shredder Types - Two shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which ...


    By Harden Industries Ltd.

  • Shredder Types - Single shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which are generally high-speed systems. ...


    By Harden Industries Ltd.

  • Shredder Types - Four shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which are generally high-speed systems. ...


    By Harden Industries Ltd.

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Dual Shaft Shredder

    ¡Dual shaft shredder for plastics/rubber scrap or other solid waste recycling. Harden double shaft shredder are being used for the recycling of plastic film, woven sacks, plastic drums, used computer and office machines, as well as wooden pallets. Harden Industries also supplies custom made ...


    By Harden Industries Ltd.

  • The Features of Shear-type Shredder

    Shear-type Shredder is a kind of size-reduction equipment. ...


    By Harden Industries Ltd.

  • In the market for a new shredder or grinder?

    For recycling companies choosing a paper shredder or grinder is no easy task. One has to consider shaft designs, capacity, speed, screen sizes, etc. E-waste has complicated matters even further. Increasingly, recyclers are calling upon shredder manufacturers to design machines that can shred not only paper, but computer hard drives and other electronic equipment as well. In this article we’re ...

  • GIANT OTR mobile Tyre SHREDDER

    Arrowhead International LLC. is the first company to offer a portable giant OTR shredder capable of processing tires up to 63.5” bead diameters. This is ideal for recycling mining tyres on site. This shredder will shred whole giant OTR tires on site, which has never been done before. it is a high speed shredder capable of shreding 4-5 63.5" tyres ...


    By Arrowhead International

  • AXO Shredders Case Studies - Singapore

    Established waste paper merchant Semb Enviro Tay Paper has been involved with document shredding for many years in Singapore. When they saw that mobile shredding was becoming popular, they wanted a solution that would suit the particular requirements of Singapore. The truck would have to be of a size that would be efficient in congested city streets, but would also have to have a quick enough ...


    By AXO Shredders Ltd

  • AXO Shredders Case Studies - USA

    Like many Mobile Shredding business owners Mike Brechtelsauer of Absolute Shreds, Michigan, was interested in achieving greater throughput, which would ultimately contribute to a more efficient Mobile Shredding service. The machinery alternatives presented were numerous however; the AXO WM 608 model surpassed the rest in terms of quality, reliability and its overall effect on throughput. Mr. ...


    By AXO Shredders Ltd

  • Size-reduction of thermoplastics reinforced by long and continuous filaments

    Material utilization of thermoplastics reinforced by long and continuous filaments to produce high-value, long-filament reinforced extrusion components requires a gentle size-reduction of the materials to be utilized into lumps of grinding stock in order to achieve a large as possible filament length. The properties of the components to be produced out of this grinding stock are determined by the ...


  • Shredder for solid and thick-walled profiles and pipes

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, Sinsheim, (www.neue-herbold.com), extends their machinery range by a new 4-shaft shredder with force feeding system. The 4-shaft shredder type HZR 1300/4 is able to size-reduce solid chunks and start-up lumps, as well as thick-walled profiles and pipes up to a diameter of 1200 mm x 1200 mm and up to a length of 6000 mm. The size ...

  • Getting to know the UNTHA VR series shredder

    After 40 years in the industry, many organisations would find it difficult to maintain an innovative edge. Yet renowned for pioneering developments within the shredding technology marketplace, UNTHA has managed to continuously design and manufacture new and exciting machinery throughout the decades. The key driving force behind the invention of all UNTHA shredders is, ‘what do clients ...


    By UNTHA UK LTD

  • New shredder boosts BPR’s destruction of confidential waste

    Waste management experts BPR Group has invested in a leading-edge shredder to improve the scope and security of its confidential paper destruction service. The company has installed the renowned UNTHA RS100 shredder at its Rainham facility in Greater London, enabling BPR to bring its shredding operation in-house rather than contract it out to a third party. BPR is now generating revenues of more ...


    By UNTHA UK LTD

  • RDF production at Delete Oy with UNTHA shredders

    UNTHA’s complete RDF system strengthens Delete’s waste to energy commitment When environmental services specialist Delete needed a new alternative fuel production system for its site in Tampere, central Finland, the €100million turnover company turned to Austrian-based UNTHA. Now manufacturing more than 20 tonnes of 80mm RDF an hour, ...


    By UNTHA Shredding Technology

  • Presses and shredders from one source - Case Study

    Channel baling press, document shredders and hard disc shredder: Schmitt Recycling in Fulda is based entirely on HSM. The proprietor, Wolfgang Schmitt, values the high performance and reliability of the HSM machines. The modern machine park helps him against major competitors. It is a bit like Asterix: Schmitt Recycling in Fulda is a smaller medium-sized waste disposal business with ...


    By HSM GmbH + Co. KG

  • Holcim: SRF production with UNTHA shredders in Vietnam

    Work is underway to commission a Solid Recovered Fuel (SRF) manufacturing plant in Vietnam, for one of the world’s leading cement and aggregates specialists, Holcim. The plant will process solid footwear production waste from the country’s main shoe factory, to create a fossil fuel substitute that will power Holcim’s local cement kiln calciner. Following a global ...


    By UNTHA Shredding Technology

  • Detox Environmental Selects UNTHA-America Shredders

    Shampoos, toothpaste, paint, cough medicine--disposing of these items can be a messy job, but for Detox Environmental of Bowmanville, Ontario, it’s all in a day’s work. Detox Environmental is a waste management firm specializing in hazardous and non-hazardous waste disposal, recycling, industrial services, emergency response, and chemical waste transportation. To aid them in ...


    By UNTHA Shredding Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you