slop-oil collection equipment Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Reducing Oil & Gas Methane Emissions: EPA Regulations & Data Collection

    U.S. President Barack Obama and Canadian Prime Minister Justin Trudeau recently committed to very specific targets in the oil and gas sector. Their ambitious goal is to reduce methane emissions by 40-45 percent below 2012 levels by 2025. This target was reaffirmed ...


    By Intelex Technologies Inc.

  • Food Waste Collection Companies Grow With The Flow

    On October 1, the Commonwealth of Massachusetts’ ban on landfill disposal of commercial organics from establishments generating one ton or more of food waste per week goes into effect. On the front lines of helping these businesses and institutions comply are organics haulers, many of whom have been offering their services for years. “Seven years ago, we were servicing about two dozen ...


    By BioCycle Magazine

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Rugged Tablet helps with Data collection in tornado clean-up - Case Study

    Challenge After a massive tornado wiped out much of the city of Joplin, Missouri, Asbell Excavating needed to find all of the downed transformers, note their location, then go back and clean up the spills before serious environmental damage could occur. Solution GPS points were imported first into an Excel spreadsheet then into Carlson Takeoff, put it on the ...


    By Handheld UK and Ireland Ltd

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Oil Skimmers Inc., solves environmental concerns for heavy equipment, maintenance and washdown facilities

    Beckwith Machinery Company of Murraysville, Pennsylvania, is one of the largest Caterpillar dealers in America, with 11 sales, service and manufacturing facilities in Pennsylvania and West Virginia. Beckwith's Cranberry, Pennsylvania facility also has a large rental business. When the machines are returned, many are loaded with mud, grease and oil. The mud can be removed simply by washing the ...


    By Oil Skimmers, Inc.

  • Five of the Best Cooling Tower Water Treatment Equipment Supply and Technology Companies

    Here at SAMCO technologies, our custom-engineered, cutting-edge solutions for your cooling tower water treatment needs have been developed by helping our customers solve some of the most complex purity and separation issues globally for over 40 years. Because of our skilled engineers and overall expertise in cooling tower water treatment, we are confident that our solutions are some of the best ...


    By SAMCO Technologies, Inc.

  • Oil skimmers solutions guide: oil services industry

    Retif Oil & Fuel Inc. is one of the top petroleum specialty products distributors in the nation, offering customers a full range of services from commercial and retail deliveries to on- and off-site refueling services. The company has served the greater New Orleans area through three facilities since 1965 and has a commitment to serve an expanded market throughout the entire Gulf Coast. ...


    By Oil Skimmers, Inc.

  • Regeneration of used oil

    Used oil regeneration technologies Over time, oil accumulates oxidation products, contaminants and impurities which drastically reduce its quality. Contaminated oil can no longer meet quality requirements and must be changed. Waste oil is collected and regenerated to retain valuable basic materials. Oil cannot be recycled at petroleum processing plants with ...


    By PC GlobeCore

  • Oil Skimming...no longer a luxury

    Tramp oils – hydraulic oil, lubricating oil and greases, and protective metal coatings, in coolant create expensive and frustrating problems. Tramp oils in coolant provide a breeding ground for bacteria and can cause problems ranging from unpleasant odor to employee skin rashes. When tramp oils combine with other contaminants in coolant they can form a sticky substance that clogs lines and ...


    By Oil Skimmers, Inc.

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • The Important Job of Oil Mist Collectors

    The majority of business owners whose manufacturing process requires machinery that uses coolants, lubricants, or oils know how vital it is to keep the spray or mist released, during the operation from collecting on walls, ceilings or floors as much as possible. Emissions that are uncollected, can lead to slippery surfaces and an unhealthy working environment, which is why an  ...


    By ProVent, LLC

  • Air Monitoring for the Gulf Oil Spill

    Ambient air monitoring is a priority in the ongoing efforts to contain and manage the oil spill from the Deepwater Horizon in the Gulf of Mexico. The following provides information about the kinds of airborne contaminants that are currently being monitored in the Gulf, how they are collected and how they are analyzed. For a given project, a suitable sampling plan – developed by ...


  • Oil grabber® model 8 recovers 70% of quench oil

    An oil skimmer for use on heated spray wash tanks in a Midwestern heat treating firm has enabled the company to recover 70% of their quench oil from the washing solution, materially aiding their energy conservation program. Recovery and recirculation of 70 % of the quench oil is considered an exceptionally high level of efficiency according to Mr. James Reh, Plant Engineer for Lindberg Heat ...


    By Abanaki Corporation

  • Oil Mist Collectors: Installation Costs

    An oil mist collector not only protects the health of employees, but also makes an addition to your machining equipment. These are inexpensive pieces of equipment and installing the system doesn’t require any high costs. However, there are a few costs that arise after installation, which all companies with this system will face. Equipment Downtime Depending on how the oil ...


    By ProVent, LLC

  • Tyre Pyrolysis Oil Distillation plant, Tyre Pyrolysis Oil Distillation Unit

    Tyre Pyrolysis Oil Distillation Plant Tyre Pyrolysis Oil Distillation Plant Introduction Reduce pressure distillation new technology , is the new technology are developed as per the characters of tyre oil , plastic oil which refine from waste tyre ,plastic.This new ...

  • Contain Oil Vapor for Better Reliability

    In a boiler feed pump, an air breather is used to vent the enclosed air space on the bearing housings. With increasing heat and thermal expansion, oil vapors form in the bearing housings and migrate through the air vents. The vapor then condenses in the air filter media saturating the filter with oil. The air breather becomes ineffective, which affects mechanical seals and the overall ...


    By JLM Systems Ltd

  • Case study - oil removal from oil water separator

    Customer: Food Processor; forming and precooking prepared food items for the fast food industry.  Plant located in Upstate New York. The Problem: Customer operates three shifts of production.  The third shift is responsible for washing and sanitizing all food process equipment and surrounding areas.  Oil and grease from sausage and ...


    By SkimTech Inc.

  • Oil skimmers cure a header headache

    Oil skimmers are being used in a major Cleveland bolt making plant to clean liquid coolant and clear the air, virtually eliminating the oil smoke and haze that are inherent in hot heading applications. The skimmers are equally efficient in less demanding press operations. Lake Erie Screw Corporation installed the five skimmers - they are Abanaki models - to serve from one to seven headers each. ...


    By Abanaki Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you