slop-oil decanter Articles

  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • maintenance of the vibrator motor for KOSUN decanter centrifuge

    Solids control system is the indispensable sector in oil & gas drilling oeration, consists of drilling fluids circulating tank, drilling fluids purification equipment where shale shaker,vacuum degasser,desander, desilter,decanter centrifuge,centrifugal&nbs ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • KOSUN Decanting Centrifuges Sent to South Asia

    Recently, three KOSUN DC355 decanting centrifuges  ordered by a famous South Asian oil company have successfully arrived at Shenzhen Port for shipment. This is the second time for the customer to buy solids ...


  • VSEP beats decanter centrifuge at solids removal from ethanol biomass

    As the world searches for fuel alternatives to gasoline, a clear candidate to lead the way has emerged, Ethanol. Ethanol production for use as a fuel additive (or to be used directly as a fuel source) has grown in popularity due to governmental regulations and in some cases economic incentives. Both regulations and incentives seem to be based on environmental concerns as well as a desire to ...


    By New Logic Research, Inc.

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • Biochemical, morphological, and yield responses of lady's finger plants to varying ratios of palm oil mill waste (decanter cake) application as a bio-

    Background:Decanter cake is produced in large amounts, and its disposal is a major concern in palm-producing countries. Growth morphology and biochemical responses of lady's finger (Abelmoschus esculentus) plants grown on soil amended with different ratios of decanter cake (0%, 10%, 20%, and 30%) were investigated. Results:The soil pH decreased (unamended soil), whereas the electrical ...

  • Oil Skimming...no longer a luxury

    Tramp oils – hydraulic oil, lubricating oil and greases, and protective metal coatings, in coolant create expensive and frustrating problems. Tramp oils in coolant provide a breeding ground for bacteria and can cause problems ranging from unpleasant odor to employee skin rashes. When tramp oils combine with other contaminants in coolant they can form a sticky substance that clogs lines and ...


    By Oil Skimmers, Inc.

  • Kimre Inc. LIQUI-NOMIX oil-water separators

    Liquid - liquid mixtures of contaminant oils (or organic solvents) in water (or aqueous solvents) can be separated economically and efficiently with gravity settlers or decanters. To achieve high efficiency separations, the settling unit must include a coalescing stage for removal of small droplets of oil. Kimre Inc.'s LIQUI-NOMIX coalescers provide high efficiency polishing of liquid streams and ...


    By Kimre, Inc.

  • Oil skimmer pays off for paper mill

    Skip Hogue is maintenance manager at St Joe Container Corporation, a paper mill and converter in College Park, GA that produces about 100 tons of corrugated boxes each day. Hogue noticed excessive oil in the wastewater discharge from boxboard operations. This oil comes from the rolls and bearings on the corrugating machines, and ends up in the plant's drainage system. Drainage water empties into ...


    By Abanaki Corporation

  • A way to skim and save: a guide to oil skimming

    Plant personnel are always looking for new tools and equipment to help them run their facility more efficiently. In many manufacturing and processing plants, oily water is present, which prevents a plant from functioning efficiently. Water has several purposes in a manufacturing or processing facility. It can be used for cooling machinery, washing down equipment or in processing. Sometimes, this ...


    By Oil Skimmers, Inc.

  • Oil Skimmers, Inc., pays off for Hon Industries

    The manufacture of metal office furniture has hidden problems which can make production of the end product frustrating and can slow up the production process. One such hidden problem is the presence of waste oil which builds up in the parts washer solution, leaving a film clinging to the metal sur face when the build-up becomes too great. If any oil does remain on the surface, paint will not ...


    By Oil Skimmers, Inc.

  • Large office furniture company saves money with Oil Skimmers

    Oil Skimmers, Inc. Pays Off for Hon Industries The manufacture of metal office furniture has hidden problems which can make production of the end product frustrating and can slow up the production process. One such hidden problem is the presence of waste oil which builds up in the parts washer solution, leaving a film clinging to the metal surface when the build-up becomes too great. If any oil ...


    By Oil Skimmers, Inc.

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Usen

    “Oil is not only an important sector of our industry but also a symbol of the independence of our country, of the hope for a better future”. These were the words of President Nursultan Nasarbayev in September 1999, commemorating the 100th anniversary of the formation of the oil and gas industry. The oil industry in Kazakhstan has existed for more than 100 years, however a significant boom in this ...


    By Flottweg SE

  • Salmon Processor

    The water is from a salmon processor where they are using an Andritz 3 phase decanter centrifuge to recover the oil in the salmon parts after packaging the salmon for human consumption. The oil is very valuable for use in the health food industry. The Andritz centrifuge recovers 90% of the oil from the wastestream, but leaves a residual oil emulsion that needs to be treated prior to discharge to ...


    By Integrated Engineers Inc.

  • A new way to Skim and save

    Oil and water don’t mix, efficiency and profits often do. While the oil and water adage is well known to biodiesel producers—it means feedstock is contaminated with water—it also offers an opportunity. Biodiesel plant personnel are always looking for new tools and equipment that help a facility operate more efficiently. Oily water is a major hurdle to efficient processing ...


    By Oil Skimmers, Inc.

  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • Selenium Removal

    The oil refinery was in search of a feasible solution for the removal of selenium. Discharge permit changes by the EPA require a reduction of 50% from current levels. Integrated Engineers, Inc. was given an opportunity to perform a feasibility test to determine a treatment process as well as estimated operational costs. The best process was to adjust the pH from 7.0 to 10.0 using caustic, ...


    By Integrated Engineers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you