sludge dewatering equipment Articles

  • Sludge dewatering in Circular Economy

    The change of mentality to a circular economy has revealed the importance of reusing and energy recovery from sludge as secondary raw material Circular economy and re-use of waste materials ...


    By Toro Equipment S.L.

  • New processes for the improvement of sludge digestion and sludge dewatering

    INTRODUCTIONThe examination of numerous sewage sludges from municipal wastewater treatment plants leads to the conclusion that on the one hand dewaterability of these sludges worsens and that on the other hand dewaterability of sludges becomes more and more important due to increasing disposal costs. Especially wastewater treatment plants with inflows from the food processing industry often face ...


    By Cambi Group AS

  • Village of Maybrook, NY Sludge Dewatering System

    Project Summary: The Village of Maybrook WWTP process consists of primary clarification, trickling filters, and secondary clarification. Primary sludge and trickling filter humus is anaerobically digested. The belt filter press dewaters the sludge eliminating the need for sludge drying beds. The belt filter press discharge cake solids are consistently in the 25 to 30 percent range, which is ...


    By BDP Industries

  • Sludge Dewatering Performance - A Survey Of Real Operational Performance

    Abstract. A survey of the literature revealed that it is difficult, indeed virtually impossible, to get meaningful information about the likely performance of dewatering equipment. As a consequence customers have sometimes specified impossible target  performances and suppliers have unwisely agreed to them. Dewatering has major consequences for downstream processes, for example sizing dryers ...


    By Cambi Group AS

  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...

  • Environmental sludge treatment

    During the process of wastewater treatment, sludge generation is an important and at times crucial issue to be addressed as inadequate sludge handling system can pose serious environmental implications. Liquid sludge can be easily thickened and reduced to a solid cake via sludge thickening / dewatering. This reduces the volume of liquid sludge significantly, usually resulting in a quite ...


    By Doyen Machinery CO., Ltd

  • The Importance of Dewatering

    With spring comes two things: the onset of construction season for most of our country and rain- lots and lots of rain. The unpredictability of storms and the amount of rainfall is all a guessing game.  Jobsites flood, work stalls and projects get delayed. Rain makes it hard to keep dry and on-schedule. What’s the solution? Dewatering is a technique used to control ...


    By Pac-Van, Inc.

  • Dewatering sludge, coming from the cellar of the Rijksmuseum with Geotube - Case Study

    Foreword: In 1885, the first National Museum of Holland opened its doors in Amsterdam. The architect Cuypers designed the building in a mixture of both Gothic and Renaissance styles. Since the opening, the original building has been extended by the construction of new wings, and changes have been made to Cuypers' original design. An ongoing project to restore the Rijksmuseum ...

  • D-Series decanter for sludge dewatering at RHV STEYR, Austria - Case Study

    Innovative energy efficiency technologies RHV STEYR, a community environmental association serving the city of STEYR (Austria) and several neighboring villages, enlarged and modernized its sewage treatment facility to cope with the ever increasing requirements of more stringent legislation in the face of rising effluent levels and thus, increasing amounts of sludge. The ...

  • Advanced Dewatering & Drying System – A Performance Model

    Since the beginning of 2006, an advanced dewatering and drying system has been operating in the United Kingdom. The facility is producing greater than 40 dry metric tonnes per day of enhanced biosolids in accordance with European Union regulations. The facility is producing biosolids with pathogen levels near minimum detectable levels. This is being achieved with an energy usage less than the ...

  • The Cambi Thermal Hydrolysis Process (THP) – dramatically improving sludge digestion and dewatering

    CAMBI MILESTONES 1990 - First development work following research work of Li and Noike 1995 – HIAS Norway – first full scale plant – still working very well after 11 years 1998 - 2002 rapid increase in projects, Denmark, England, Norway, Scotland, Japan, Ireland – new challenges and risks to be overcome 2000 - 2005 some problem solving ...


    By Cambi Group AS

  • Full scale optimisation of sludge dewatering and phosphate removal at Harnaschpolder wwtp (The Hague, NL)

    At Harnaschpolder wwtp phosphate removal from wastewater and sludge dewatering is optimised by dosing magnesium hydroxide to digested sludge. To optimise sludge dewatering and phosphate removal, a full-scale test has been executed since August 2015 using temporary equipment. In this test magnesium hydroxide is added to the digested sludge buffer. Significant positive results are achieved. An ...


    By IWA Publishing

  • Wastewater-Solids Dewatering Odor Control - Case Study

    Background The Milan Wastewater Treatment Plant, located just south of Moline, Illinois, is a 1.7 MGD (6,434 m3/day) activated sludge facility with an average wastewater flow of 700,000 gpd to 800,000 gpd. This facility dewaters primary sludge using a belt filter press (Figure 1). The press operates an average of three times per month, 8 hours per day at a pump rate of 100 gpm. The ...


    By Carus Corporation

  • VOLUTE Dewatering Press reduces maintenance time sharply! (Japan)

    Komagata Foods Co., Ltd. <Problem> Komagata Foods Co., Ltd., manufacturing feed for fish cultivation, used to use a belt filter press, but they had always faced clogging problems because of the oily sludge. They also suffered from spillage over from the side of filter cloth, making operators to keep their eyes on the machine all day. <AMCON's offer for ...


    By AMCON Inc.

  • Activated Sludge Treatment Plant - Eatonton, Georgia - Case Study

    Solids management at municipal wastewater treatment plants is crucial in maintaining operating efficiencies and permitted discharge levels. Drying beds and mechanical methods of dewatering bio-solids can be labor intensive and inefficient for rapid solids removal. Miratech Geotube" Dewatering Technology offers munic-ipalities a cost effective solution for rapid solids removal and long term solids ...

  • Accuracy and Cost Savings from Automatic Optimization of Dewatering

    Improvements in sensor and automation technology in recent years have made it possible to design a system to control the key variable parameters in and around the dewatering process. By continuously analyzing feed conditions and output from the process, an automated optimization system can make necessary proactive adjustments to the internal settings of the dewatering equipment, the polymer ...

  • Sludge drying beds, Sarasota County, Florida - Case Study

    Dewatering sludge at wastewater treatment plants has traditionally been a major operational concern. Most large operations must use mechanical filter presses or centrifuges to efficiently dewater their sludge. For many smaller operations, however, this equipment is too expensive and too large for their needs. Therefore, many smaller facilities rely on the sand filter drying beds for sludge ...


    By Presto Geosystems

  • Cost Comparison for Sludge Disposal (Japan)

    Problem A company, manufacturing arrowroot flour and Japanese sweets in Kagoshima Prefecture, has a plenty of sludge which costs highly to be disposed. Upon the intention to reduce the cost for sludge disposal by gaining higher cake solids content, the operator was looking for a suitable dewatering equipment to replace their multi disc equipment. Client’s ...


    By AMCON Inc.

  • Pulp & Paper Sludge Dewatering - Stora Enso, Niagara Mill, Wisconsin - Case Study

    The Stora Enso, Niagara Mill, was established in 1889. Niagara Mill uses 7,500,000 gallons per day of water from the river to make pulp & paper. The removal of the solids is accomplished by treating it with alum, then a flocculent, allowing the solids to settle out in a 2,000,000 gallon setting tank system. This tank requires yearly cleaning to ensure quality water for the paper making ...

  • Squeeze sludge fresh out of the reactor. Don`t wait until it stinks! (Japan)

    Municipal sewage application [Oxidation Ditch] 【Problem】 In the wastewater treatment plant of a town in Nagano, the long-used belt press was in a time to be overhauled. The person in charge had racked his brain over the problem of huge cost required to overhaul this equipment at regular intervals. He had been seeking a solution to this problem. In addition, he ...


    By AMCON Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you