sludge drying process system Articles

  • Agrior Project, Chaudière-Appalaches, Quebec, Canada

    Compost Drying Application Agrior makes high value organic fertilizers by composting a mixture of animal manure and organic municipal and industrial wastewater treatment sludge. A DRY-REX low-temperature drying system was designed and installed at Agrior’s facility to dry the mixture into high-quality compost. The low-temperature process results in the drying of the manure with minimal ...

  • Three years of operation of North America's first nutrient recovery facility

    The first full-scale nutrient recovery installation in North America became operational in May 2009 at the Clean Water Service's Durham Advanced Wastewater Treatment Plant in Tigard, Oregon. Recovering ammonia and phosphorus from the dewatering side stream as struvite has a positive impact on plant operations. Significantly reducing the phosphorus recycle lowers the phosphorus loading on ...


    By IWA Publishing

  • Uniforet Mill, Quebec, Canada

    Biomass Drying For Bioenergy A DRY-REX low temperature biomass drying system was installed at a Uniforet pulp and paper mill in Quebec to dry sludge produced during the paper making process into a high efficiency biofuel. Prior to the DRY-REX project, the mill was spending millions of dollars to treat and landfill the sludge as waste. The DRY-REX system processed 200 wet tons of sludge a day ...

  • Waterboard Hollandse Delta (STW Rotterdam) - Case Study

    Meeting strict demands on nitrogen levels with ANAMMOX® Sewage Treatment System (STW) Rotterdam has a capacity of 620,000 population equivalents and consists of two stage AB process. Waterboard Hollandse Delta was the first to decide on ANAMMOX® as the preferred process for the recovery of nitrogen from the reject water. Fifteen percent of STW’s ...


    By Paques Technology B.V.

  • Environmental assessment of different dewatering and drying methods on the basis of life cycle assessment

    Sewage sludge is an inevitable product of wastewater treatment in municipal wastewater plants and its amount has increased dramatically due to the growing number of sewage systems users. This sludge needs to be adequately treated in order to decrease its hazardous properties and any negative influence on the environment. In this paper, gate to gate analysis, on the basis of life cycle assessment ...


    By IWA Publishing

  • Two-phase anaerobic digestion for class a biosolids at moccasin bend WWTP

    The Moccasin Bend Wastewater Treatment Plant (WWTP) provides treatment for the City of Chattanooga, Tennessee and the surrounding region. The City has completed upgrades to the solids handling facilities to treat and dewater the primary solids and waste activated sludge (WAS) from the WWTP. This paper summarizes the process to handle the primary solids and the start-up process. Primary solids ...

  • Village of Maybrook, NY Sludge Dewatering System

    Project Summary: The Village of Maybrook WWTP process consists of primary clarification, trickling filters, and secondary clarification. Primary sludge and trickling filter humus is anaerobically digested. The belt filter press dewaters the sludge eliminating the need for sludge drying beds. The belt filter press discharge cake solids are consistently in the 25 to 30 percent range, which is ...


    By BDP Industries

  • Sewage treatment plant case study

    Contributing to snowy regions in which the transportation of sludge is difficult In municipal wastewater treatment plant in snowy regions, snow-bound in winter, taking dewatered cake out regularly is sometimes difficult. Two problems were also presented in this municipal wastewater treatment plant, i.e., the difficulty of taking sludge out using carriers in winter, which had been ...


    By AMCON Inc.

  • Advanced Dewatering & Drying System – A Performance Model

    Since the beginning of 2006, an advanced dewatering and drying system has been operating in the United Kingdom. The facility is producing greater than 40 dry metric tonnes per day of enhanced biosolids in accordance with European Union regulations. The facility is producing biosolids with pathogen levels near minimum detectable levels. This is being achieved with an energy usage less than the ...

  • Waste Water Treatment Plant City of Oakley, UT

    The City of Oakley was very happy with their new MBR facility except for the filter bag sludge dewatering system that was very labor intensive and usually didn’t produce an adequately dewatered sludge. Scott Rogers of Aqua Engineering and Bob Johnson, the Operations Mgr., chose to replace the bag system with a 0.9 meter model DDP belt press system from BDP Industries. The DDP belt press ...


    By BDP Industries

  • The application of moving bed biofilm reactor to denitrification process after trickling filters

    The paper presents research of a prototype moving bed biofilm reactor (MBBR). The device was used for the post-denitrification process and was installed at the end of a technological system consisting of a septic tank and two trickling filters. The concentrations of suspended biomass and biomass attached on the EvU Perl moving bed surface were determined. The impact of the external organic ...


    By IWA Publishing

  • Dewatering sludge originating in water treatment works in reed bed systems

    The dewatering process of the liquid water works sludge was examined in a trial with a series of six trial beds, each 20 m2. These were monitored from April 2008 to June 2010. It is possible to get the vegetation to grow in ferric sludge (∼300,000 mg Fe/kg dry solid, pH 7,7). It has not been necessary to use fertilizer. The influence of the loading programs (15–50 kg dry solid/m2/year) was tested ...


    By IWA Publishing

  • Ammunition Manufacturing

    An ammunition manufacturing facility was having problems removing copper and zinc from their 900 gpm wastewater system. The process used lime to raise the pH from 1.5 to 10, sodium carbamate for a metal precipitant, and an anionic flocculant to increase the flock size and get the solids to settle in the clarifier. Current chemical costs are estimated at $225,000/year with a significant amount of ...


    By Integrated Engineers Inc.

  • Investigation of the effects of temperature and sludge characteristics on odors and VOC emissions during the drying process of sewage sludge

    Sludge drying is a necessary step for sludge disposal. In this study, sludge was collected from two wastewater treatment plants, and dried at different temperatures in the laboratory. The emission of odor and total volatile organic compounds (TVOCs) during the sludge drying process were determined by an online odor monitoring system. The volatile organic compounds (VOCs) in off-gas were analyzed ...


    By IWA Publishing

  • Identifying energy and carbon footprint optimization potentials of a sludge treatment line with Life Cycle Assessment

    This study exemplifies the use of Life Cycle Assessment (LCA) as a tool to quantify the environmental impacts of processes for wastewater treatment. In a case study, the sludge treatment line of a large wastewater treatment plant (WWTP) is analysed in terms of cumulative energy demand and the emission of greenhouse gases (carbon footprint). Sludge treatment consists of anaerobic digestion, ...


    By IWA Publishing

  • Gold Recovery-1

    The manufacturing of jewelry is comprised of molding to form the jewelry followed by a polishing step, then deburring or ultrasonic cleaning. These steps leave residual gold in the rinsing and ultrasonic cleaning waters. To recover the gold, industries use the FloccinAgentstm for a one step liquid/solid separation process. The process is to collect all of the wastewater into a mixing container. ...


    By Integrated Engineers Inc.

  • Reduction and control of total Nitrogen in a cheese factory case study

    Treatment system enhancement using Microcat - DEN Denitrifiers - BSE 099 Problem The wastewater treatment system receiving wastewater from a cheese factory in the EU has difficulty meeting total nitrogen effluent discharge requirements. The wastewater flow rate is 2000 cubic meters per day. The treatment system consists of two sequencing batch reactors (SBRs) ...


    By Bioscience, Inc.

  • On-Site Thermal Desorption of PCP- and Dioxin-Contaminated Soil at the Coleman-Evans Wood Preserving Site, Whitehouse, Florida, USA

    ABSTRACT Roy F. Weston, Inc. (WESTON®) has designed an indirect thermal desorption process (known as the LT3-HT) to treat solids and sludges contaminated with hazardous and toxic materials. The LT3-HT is a high-temperature, high-capacity thermal desorption system designed for treatment of semivolatile and volatile organic contaminants that require high treatment temperatures. The LT3-HT ...


    By Weston Solutions, Inc

  • Advanced Digestion Plant at Bran Sands design and construct experiences

    Abstract In June 2007 Northumbrian Water awarded a design and construct contract to Aker Solutions for a new advanced digestion (AD) plant at their Bran Sands site on Teesside. Following laboratory trials, advanced digestion via thermal hydrolysis was identified as the preferred treatment process for the upgrade of Bran Sands Regional Sludge Treatment Centre (RSTC). The plant will treat ...


    By Cambi Group AS

  • Commissioning and re-design of a ”class a” thermal hydrolysis facility for pre-treatment of primary and secondary sludge prior to anaerobic digestion

    ABSTRACT Thermal hydrolysis of sewage sludge as a pretreatment technique for producing a “Class A” sludge, with existing (or new) mesophilic anaerobic digestion systems are presently being considered for wastewater treatment plants in the USA and Canada. In Europe, a number of innovative hydrolysis systems have been installed or are planned. One technology sold under the trade name CAMBITM has ...


    By Cambi Group AS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you