sludge level Articles

  • New sludge blanket level analyzer from Entech

    Entech Design, Inc.’s BinMinder 9300 features a multi-channel analyzer designed for superior sludge level detection in the full range of water and wastewater applications. The system consists of an analyzer that is capable of operating from one to four sensors or transducers for reliable and cost-effective measurement. Measurements are made by transmitting a high frequency sound wave and ...


    By Entech Design, Inc.

  • Automatic Sludge Blanket Level Detector: Monitor & control for effective, efficient processing

    Reducing energy consumption at municipal and industrial plants is, increasingly, a priority. Markland Specialty Engineering Ltd., designing and manufacturing process control instrumentation since 1967, helps achieve this important goal with its Automatic Sludge Blanket Level Detector. By helping facilities reduce waste - reducing unnecessary water, chemical or energy use, and unnecessary ...

  • Online interface/sludge blanket level analyzers performance evaluation report

    Following is a review of the ITA report on independent field evaluation of ultrasonic sludge level analyzers provided by four manufacturers. The evaluation was conducted over a period of 15 weeks at the Blue Plains Advanced Wastewater Treatment Plant in Washington, ...


    By Entech Design, Inc.

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • Sewage sludge management in Malaysia

    This paper describes the current status of sewage sludge management in Malaysia, including sludge characteristics from both communal sewage treatment facilities and septic tanks. The levels of potentially toxic elements in the sludge are defined and compared to levels elsewhere in the context of the suitability of the sludge for agricultural use. Current sludge disposal practices are reviewed and ...


    By Inderscience Publishers

  • Technical Focus: Sludge Blanket

    Regardless of treatment process, sludge blanket control is an important aspect of any wastewater treatment plant, and correct monitoring and treatment of sludge is paramount for efficiency and cost control. Manual monitoring of sludge blanket levels is an occasional and often rushed method of control and can lead to inaccuracies being compounded over time, potentially leading to overspill into ...


    By Partech (Electronics) Ltd.

  • Controlling Sludge in Lamella Clarifiers

    This month we are focusing on the control of sludge blanket build up in Lamella Clarifiers. Lamella Clarifiers, also known as Inclined Plate Separators (IPS) are in common use at Waste Water Treatment Sites as small footprint plant settlement units and are often employed in ...


    By Partech (Electronics) Ltd.

  • Industrial Sludge Wastewater Treatment

    Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve Bacteriological ...


    By Integrated Engineers Inc.

  • Industrial Sludge Treatment

    Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve ...


    By Integrated Engineers Inc.

  • Colloidal sludge - case study

    YEAR: 2003 COUNTRY: ITALY N° and MACHINERY MODEL EMPLOYED: 1  JETFILTER RH 1000.70 Diemme® Filtration The customer is a company that produces ceramic pastes, requiring the dewatering of ceramic barbotine, a colloidal material which is difficult to dewater. It already had a filter press that did not have the ...


    By Aqseptence Group

  • Working Document on Sludge

    Untitled Document Introduction Sewage sludge originates from the process of treatment of waste water. Due to the physical-chemical processes involved in the ...

  • Novel method for sludge blanket measurements

    The most widely used methods for sludge blanket measurements are based on acoustic or optic principles. In operation, both methods are expensive and often maintenance-intensive. Therefore a novel, reliable and simple method for sludge blanket measurement is proposed. It is based on the differential pressure measurement in the sludge zone compared with the differential pressure in the clear water ...


    By IWA Publishing

  • Heavy metal & hydrocarbon contaminated sludge

    Solidification of Heavy Metal & Hydrocarbon Contaminated Sewage Sludge Client: North Lanarkshire Council Project Managers: Jacobs Challenge: The former sewage treatment works were decommissioned in the 1970’s. It is thought that during the closure process, demolition material originating from the ...


    By Soilutions Ltd

  • Faecal sludge management - Malaysia Philippines

    1. Overview and key points Malaysia has been recognised to have adopted a good sanitation model through the use legislative reforms and implementation models. A firm set of guidelines along with clear knowledge on the role played by every stakeholder, especially that of developers whose responsibility it is to construct their own wastewater treatment, enabled an increase in sanitation coverage ...


    By IWA Publishing

  • Strength characteristics of aerobic granular sludge

    Aerobic granular sludge has a number of advantages over conventional activated sludge flocs, such as cohesive and strong matrix, fast settling characteristic, high biomass retention and ability to withstand high organic loadings, all aspects leading towards a compact reactor system. Still there are very few studies on the strength of aerobic granules. A procedure that has been used previously for ...


    By IWA Publishing

  • Wastewater Level Measurement Techniques

    Level monitoring and control is a fundamental requirement in any wastewater treatment process. You will find level instrumentation installed at even the simplest treatment plants for pump control, chemical storage tanks and process level controls or alarms. Operators have only limited or emergency control over treatment plant influent, so level controls and instrumentation play an important role ...


    By Greyline Instruments Inc.

  • Management of sewage sludge and ash containing radioactive materials

    Approximately 50% of the seven to eight million metric tonnes of municipal sewage sludge produced annually in the US is reused. Beneficial uses of sewage sludge include agricultural land application, land reclamation, forestry, and various commercial applications. Excessive levels of contaminants, however, can limit the potential usefulness of land-applied sewage sludge. A recently completed ...


    By Inderscience Publishers

  • Ultrasonic sludge disintegration in the presence of iron (II) as catalyst

    Increasing environmental awareness worldwide and subsequent regulations have led to the application of improved and novel technologies in excess sludge treatment. Sludge is the by–product of wastewater treatment plants rich in organic carbons, pathogens and metals. To enhance the ultrasonic sludge disintegration, a new method by introducing (Fe (II)) as a catalyst in the process has been ...


    By Inderscience Publishers

  • The Removal of Alkylphenol Ethoxylate Surfactants in Activated Sludge Systems

    US EPA has finalized federal Water Quality Criteria for nonylphenol, a biodegradation intermediate of nonylphenol ethoxylates, which are commonly used surfactants. To provide information in support of this initiative, an assessment was made of the ability of wastewater treatment plants to remove these and other alkylphenol ethoxylate (APEO) surfactants that are used widely in domestic and ...

  • Influence of reactor configuration on reliability of activated sludge process

    The effect of uncertainty in system parameters and the accuracy of the mathematical model used on the design and reliability of the activated sludge process is investigated by Monte Carlo simulations. Simulations indicate that the coefficient of variation for a reactor volume varies from 0.56 for a single mixed tank reactor to 0.44 for a plug flow reactor. The coefficient of variation for ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you