sludge level measurement Articles

  • Wastewater Level Measurement Techniques

    Level monitoring and control is a fundamental requirement in any wastewater treatment process. You will find level instrumentation installed at even the simplest treatment plants for pump control, chemical storage tanks and process level controls or alarms. Operators have only limited or emergency control over treatment plant influent, so level controls and instrumentation play an important role ...


    By Greyline Instruments Inc.

  • Novel method for sludge blanket measurements

    The most widely used methods for sludge blanket measurements are based on acoustic or optic principles. In operation, both methods are expensive and often maintenance-intensive. Therefore a novel, reliable and simple method for sludge blanket measurement is proposed. It is based on the differential pressure measurement in the sludge zone compared with the differential pressure in the clear water ...


    By IWA Publishing

  • Ultrasonic level measurement: a Modern Classic!

    Radar technology has long had the reputation of being the best method of level measurement available - but does this also apply to the wastewater market? Based on its physical characteristics, radar technology certainly offers great flexibility and high performance. However, from an objective standpoint, non-contact level measurement using ultrasound is often the first choice and also the right ...


    By Endress Hauser

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • New sludge blanket level analyzer from Entech

    Entech Design, Inc.’s BinMinder 9300 features a multi-channel analyzer designed for superior sludge level detection in the full range of water and wastewater applications. The system consists of an analyzer that is capable of operating from one to four sensors or transducers for reliable and cost-effective measurement. Measurements are made by transmitting a high frequency sound wave and ...


    By Entech Design, Inc.

  • Level measurement of ferric chloride case study

    MonoScan provides ongoing measurement results of Ferric Chloride (FeCl3) solution in one of Israel's most advanced wastewater treatment plant. The Ashdod wastewater treatment plant has invested significantly in state-of-the-art control systems to ensure 100% usage of the wastewater entering its facilities. The plant is self sufficient, by using its own resources providing power, water and gas. ...

  • Automatic Sludge Blanket Level Detector: Monitor & control for effective, efficient processing

    Reducing energy consumption at municipal and industrial plants is, increasingly, a priority. Markland Specialty Engineering Ltd., designing and manufacturing process control instrumentation since 1967, helps achieve this important goal with its Automatic Sludge Blanket Level Detector. By helping facilities reduce waste - reducing unnecessary water, chemical or energy use, and unnecessary ...

  • Technical Focus: Sludge Blanket

    Regardless of treatment process, sludge blanket control is an important aspect of any wastewater treatment plant, and correct monitoring and treatment of sludge is paramount for efficiency and cost control. Manual monitoring of sludge blanket levels is an occasional and often rushed method of control and can lead to inaccuracies being compounded over time, potentially leading to overspill into ...


    By Partech (Electronics) Ltd.

  • ppm Dissolved oxygen measurement

    Dissolved oxygen (D.O.) levels are used as a general indicator of water quality. Oxygen is essential to life and vital for countless aquatic forms. D.O. level control is critical in numerous applications ranging from the monitoring of industrial waste water to environmental surveillance. What is Dissolved Oxygen? Dissolved oxygen (D.O.) is the amount of oxygen gas dissolved in a ...


    By IC Controls Ltd.

  • Heavy metal & hydrocarbon contaminated sludge

    Solidification of Heavy Metal & Hydrocarbon Contaminated Sewage Sludge Client: North Lanarkshire Council Project Managers: Jacobs Challenge: The former sewage treatment works were decommissioned in the 1970’s. It is thought that during the closure process, demolition material originating from the ...


    By Soilutions Ltd

  • Faecal sludge management - Malaysia Philippines

    1. Overview and key points Malaysia has been recognised to have adopted a good sanitation model through the use legislative reforms and implementation models. A firm set of guidelines along with clear knowledge on the role played by every stakeholder, especially that of developers whose responsibility it is to construct their own wastewater treatment, enabled an increase in sanitation coverage ...


    By IWA Publishing

  • Management of sewage sludge and ash containing radioactive materials

    Approximately 50% of the seven to eight million metric tonnes of municipal sewage sludge produced annually in the US is reused. Beneficial uses of sewage sludge include agricultural land application, land reclamation, forestry, and various commercial applications. Excessive levels of contaminants, however, can limit the potential usefulness of land-applied sewage sludge. A recently completed ...


    By Inderscience Publishers

  • Modeling organic nitrogen conversions in activated sludge bioreactors

    For biological nutrient removal (BNR) systems designed to maximize nitrogen removal, the effluent total nitrogen (TN) concentration may range from 2.0 to 4.0 g N/m3 with about 25–50% in the form of organic nitrogen (ON). In this study, current approaches to modeling organic N conversions (separate processes vs. constant contents of organic fractions) were compared. A new conceptual model of ON ...


    By IWA Publishing

  • Behaviour and adsorptive removal of siloxanes in sewage sludge biogas

    We investigated the behaviour of siloxanes, which adversely affect biogas engines, as well as their concentration levels in sewage sludge biogas in Japan. We also performed experiments on the absorptive removal of siloxanes using various adsorbents and determined the main adsorbent characteristics required for the removal of siloxanes. The results of our study on the concentration and composition ...


    By IWA Publishing

  • Effect of daylight on regrowth of bacteria in anaerobically digested sludge

    This study investigated the regrowth of total coliform, Salmonella, and Clostridium perfringens in anaerobically digested sludge after centrifuge dewatering in the presence and absence of daylight. Sludge cake and centrate samples were collected from a treatment plant, and half of the samples was stored in daylight and the other half was stored in dark for three weeks. The ...


    By IWA Publishing

  • Geotube Dewatering for Lagoon Sludge - Case Study

    Background In many animal waste management schemes it is desirable to separate solids from waste water and/or manures. In cooperation with the Department of Animal and Dairy Science, animal waste specialists from Biological and Agricultural Engineering are field testing a technology new to agriculture, to remove solids from lagoons. The test is currently being conducted at the UGA Dairy ...

  • Prediction of Strutive Formation Potential in EBPR Digested Sludges

    ABSTRACTLow operating costs and less sludge generation associated with EBPR (Enhanced Biological Phosphorus Removal) have led existing wastewater treatment plants to retrofit their phosphorus removal systems and have encouraged new plants to incorporate EBPR into their design. However, in plants that use anaerobic digestion, the introduction of EBPR may result in the formation of scales of the ...

  • Installation of Radar Level Instruments in Anaerobic Digesters

    ABSTRACTThere are numerous well-proven options available for level determination instrumentation. Instrumenting treatment processes present some unique challenges. Some of these include the ability for wastewater or residuals to clog and blind instruments. Level determination in an anaerobic digester presents these problems as well as others including foaming, surface agitation, and operation in ...

  • N-Tox® prevents activated sludge failure and monitors greenhouse gas emissions

    A new technique for evaluating nitrification efficiency in industrial and municipal activated sludge systems is described that uses direct measurement of dinitrogen oxide, an important greenhouse gas, as an indicator of nitrification failure. Developed at Water Innovate, N-Tox® helps control ammonia levels in treated effluent by providing an early warning of wastewater treatment failure. The ...


    By Clarity Authoring

  • Rethinking wastewater characterisation methods for activated sludge systems – a position paper

    Increasingly stringent effluent limits and an expanding scope of model system boundaries beyond activated sludge has led to new modelling objectives and consequently to new and often more detailed modelling concepts. Nearly three decades after the publication of Activated Sludge Model No1 (ASM1), the authors believe it is time to re-evaluate wastewater characterisation procedures and targets. ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you