sludge pump technology Articles

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Common Treatment Technologies for Inorganics in Soil, Sediment, and Sludge

    The most commonly used treatment technologies for inorganics in soil, sediment, and sludge include solidification/stabilization (S/S), excavation and off-site disposal, and acid extraction. These treatment technologies are described briefly below. Solidification processes produce monolithic blocks of waste with high structural integrity. The contaminants do not necessarily interact chemically ...

  • Common Treatment Technologies for Fuels in Soil, Sediment, and Sludge

    Common treatment technologies for fuels in soil, sediment, and sludge include biodegradation, incineration, SVE, and low temperature thermal desorption. Incineration is typically used when chlorinated SVOCs are also present with fuel, and not specified for fuel-only contaminated soil, sediment, or sludge. All types of biodegradation, both in situ or ex situ, can be used to remediate soils: ...

  • Common Treatment Technologies for Radionuclides in Soil, Sediment, and Sludge

    Unlike organic contaminants (and similar to metals), radionuclides cannot be destroyed or degraded; therefore, remediation technologies applicable to radionuclides involve separation, concentration/volume reduction, and/or immobilization. The most commonly used treatment technology for radionuclides in soil, sediment, and sludge is solidification/stabilization (S/S). This treatment technology is ...

  • Future Proofing and Pumping Technology

    Untitled Document Now that the dust of the AMP 4 round has settled, the UK 's water and sewerage companies are underway with their plans to maintain, upgrade and develop their asset base over ...

  • Technical Focus: Sludge Blanket

    Regardless of treatment process, sludge blanket control is an important aspect of any wastewater treatment plant, and correct monitoring and treatment of sludge is paramount for efficiency and cost control. Manual monitoring of sludge blanket levels is an occasional and often rushed method of control and can lead to inaccuracies being compounded over time, potentially leading to overspill into ...


    By Partech (Electronics) Ltd.

  • New technology for sludge management reduces waste to landfill by 80%

    The first batch of results from a new sludge management and waste reduction system at Severn Trent's Coleshill Sewage Treatment Works in Birmingham, England show a consistent 80% reduction in waste to landfill volumes. The DMax system has specifically been developed by CDE Ireland Ltd to process a variety of wastes as detailed below. This list is not exhaustive and represents the material for ...


    By CDEnviro

  • Recycling municipal sludge with portable dredges

    Policing the pit. With today's emphasis on resource recovery, even burdensome and seemingly worthless materials are becoming increasingly valuable. Take municipal sludge, for example. For sewage treatment facilities wrestling with the problem of sludge disposal, Liquid Waste Technology may have the answer. The New Richmond, Wisconsin, USA company manufactures dredges and lagoon pumping equipment ...

  • Sludge reduction performance focus: Lagoon sludge case study

    In-Pipe Technology Pipe Technology® Company, Inc., Company, Inc., Company, Inc., is an effective, environmentally is an effective, environmentally is an effective, environmentally-friendly, and fiscally friendly, and fiscally responsible method to reduce accumulated lagoon solids. By reducing accumulated sludge volumes by 40% to 85%, In- volumes by 40% to 85%, In-Pipe Technology has helped ...

  • Dewatering of Industrial Sludge - Case Study

    At Ten Cate Protect, town of Nijverdal, The Netherlands, 2006 During the wastewater treatment process at Ten Cate Protect large quantities of sewage sludge are liberated. A couple of days per week this sludge is transported in tanker trucks to a waste disposal plant. On June 14th 2005 a Geotube MDS unit was put in operation at Ten Cate Protect to separate and condense the sludge of the aerobic ...

  • Geotube Dewatering for Lagoon Sludge - Case Study

    Background In many animal waste management schemes it is desirable to separate solids from waste water and/or manures. In cooperation with the Department of Animal and Dairy Science, animal waste specialists from Biological and Agricultural Engineering are field testing a technology new to agriculture, to remove solids from lagoons. The test is currently being conducted at the UGA Dairy ...

  • Land remediation & sludge processing case study

    In late 2009 the company was approached by a London based consultancy on behalf of their clients with oil and gas interests in an Eastern European country. The brief was to supply a technology that could assist in the clean-up of historical oil spills around redundant oil wells in a working oilfield. Our initial meeting led us to believe that this was a viable contract and following several ...

  • Case Study: Farm pond sludge and algae remediation

    Problem A 1 ½ acre farm pond located in southeastern Wisconsin was experiencing a severe algae bloom due to high levels of fertilizer runoff from the surrounding farm fields located on the north and east sides of the pond. Farm field runoff drains into the north end of the pond via a 4-inch drainpipe. The pond is further fertilized by the year round population of 6-8 resident ducks and by ...


    By Avir Environmental LLC

  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...


    By Flo Trend® Systems, Inc.

  • Dewatering sludge, coming from the cellar of the Rijksmuseum with Geotube - Case Study

    Foreword: In 1885, the first National Museum of Holland opened its doors in Amsterdam. The architect Cuypers designed the building in a mixture of both Gothic and Renaissance styles. Since the opening, the original building has been extended by the construction of new wings, and changes have been made to Cuypers' original design. An ongoing project to restore the Rijksmuseum ...

  • Activated Sludge Treatment Plant - Eatonton, Georgia - Case Study

    Solids management at municipal wastewater treatment plants is crucial in maintaining operating efficiencies and permitted discharge levels. Drying beds and mechanical methods of dewatering bio-solids can be labor intensive and inefficient for rapid solids removal. Miratech Geotube" Dewatering Technology offers munic-ipalities a cost effective solution for rapid solids removal and long term solids ...

  • Thick sludge digestion - research design and validation of key process unit operations

    ABSTRACTAdvances in the design of anaerobic digesters have seen a trend towards digestion of thicker sludges in the US, UK and elsewhere. This includes a number of new facilities using bolt on technologies to mesophilic anaerobic digestion such as Cambi Thermal Hydrolysis, Prepasteurisation and Biological Hydrolysis. Cambi Thermal hydrolysis utilises thickenedsludge and the digestion process is ...


    By Cambi AS

  • Sludge settleability detection using automated SV30 measurement and its application to a field WWTP

    The need for automation & measurement technologies to detect the process state has been a driving force in the development of various measurements at wastewater treatment plants. While the number of applications of automation & measurement technologies to the field is increasing, there have only been a few cases where they have been applied to the area of sludge settling. This is because it is ...


    By IWA Publishing

  • Biosolids Minimization using Integrated Alkaline Sludge Hydrolysis and Biological Nutrient Removal Process

     ABSTRACT This paper presents a pilot-scale evaluation of an integrated approach to sludge management utilizing a combination of biological nutrient removal and biosolids alkaline hydrolysis, as well as attempts to explore the impact of recycled alkaline hydrolysates on sludge yield and anaerobic digestion. The novel concept of converting an existing conventional activated sludge (CAS) ...

  • Pulp & Paper Sludge Dewatering - Stora Enso, Niagara Mill, Wisconsin - Case Study

    The Stora Enso, Niagara Mill, was established in 1889. Niagara Mill uses 7,500,000 gallons per day of water from the river to make pulp & paper. The removal of the solids is accomplished by treating it with alum, then a flocculent, allowing the solids to settle out in a 2,000,000 gallon setting tank system. This tank requires yearly cleaning to ensure quality water for the paper making ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you