slurry mixer Articles

  • Mono on the move with sintec

    Mono’s Widethroat W range pump forms an essential part of Sintec’s mobile system by pumping the thicker groutmixes more quickly and efficiently. Once the mobile system is in-situ and drilling of an exploratory hole is almost complete, a mixer combines the bentonite/cement grouts to form bentonite slurry. This is then transferred by the W Range pump to the holdingtank ready for injection into the ...

  • AVA – The expert for ash and dust conditioning - case study

    For an environment free of dust Application Ashes and dust from the filters of incineration, de-dusting and drying plants are lyed, moistened or solidified. The result is a disposable final product, a transportable property or re-usable value products e.g.: Dust from power plants for the use in road construction and building material industry ...


    By AVA - Huep GmbH u. Co. KG

  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • Application notes - viscosity measurement

    Most laboratory viscometers employ the well-known principle of rotational viscometers to measure viscosity by sensing the torque required to rotate a spindle at a constant speed while it is immersed in the sample fluid. This is because the torque, generally measured using the reaction torque on the motor, is proportional to the viscous drag on the immersed spindle and thus the viscosity of the ...


    By Sensor Technology Ltd

  • Solidification/Stabilization

    Introduction: As for in situ solidification/stabilization (S/S), ex situ S/S contaminants are physically bound or enclosed within a stabilized mass (solidification), or chemical reactions are induced between the stabilizing agent and contaminants to reduce their mobility (stabilization). Ex situ S/S, however, typically requires disposal of the resultant materials. Under CERCLA material can be ...

  • Combined use of ISCO and ISCR to treat CVOCs at industrial site in Texas, USA

    Groundwater at an industrial site in Texas is impacted with Chlorinated Volatile Organic Carbon’s (CVOCs), primarily PCE and TCE, from historical waste disposal. The topography at the site slopes steeply towards a small channel where the groundwater discharges. Depth to groundwater ranges from approximately 20 ft bgs at the source area to 1 ft bgs close to the channel. The soil consists of silty ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • KOSUN Decanting Centrifuges Sent to South Asia

    Recently, three KOSUN DC355 decanting centrifuges  ordered by a famous South Asian oil company have successfully arrived at Shenzhen Port for shipment. This is the second time for the customer to buy solids ...


  • Common Treatment Technologies for Radionuclides in Soil, Sediment, and Sludge

    Unlike organic contaminants (and similar to metals), radionuclides cannot be destroyed or degraded; therefore, remediation technologies applicable to radionuclides involve separation, concentration/volume reduction, and/or immobilization. The most commonly used treatment technology for radionuclides in soil, sediment, and sludge is solidification/stabilization (S/S). This treatment technology is ...

  • AD and Biogas Technology Developments in UK

    The anaerobic Digestion and Biogas Association’s fourth annual trade show and conference — UK AD & Biogas 2013 — attracted a busy stream of visitors to Birmingham, England in early July, demonstrating a growing interest in this vibrant industry sector. The event included facility tours, conference sessions, workshops, free one-on-one consultations with industry experts, ...


    By BioCycle Magazine

  • The use of oilfield shale shaker

    Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since drilling fluids solids control is vital in keeping down costs associated with the drilling ...


  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Phosphate Fertilizer Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Drilling Mud in Horizontal Directional Crossing Project

    Horizontal Directional Crossing Project has a not long development in the country and even the world. But in recent years, pipeline horizontal directional crossing has been great development, large-scale construction of oil and gas pipelines across the length and across the diameter of the continuous creation of new records. In horizontal directional crossing project, the drilling mud play a very ...


  • Antifreeze Liquid Production: Start Your Own Business

    In some areas the cold period can last for up to eight months. Sub-zero temperatures are recorded even in October. This fact makes a small antifreeze production business quite promising. Why do we need non-freezing liquids? One important area of antifreeze liquid us is cleaning of car windscreens (windscreen cleaners). Another is cooling of the ...


    By GlobeCore GmbH

  • Power Case Study - PECO Energy

    Smart Elbow® prevents magnesium oxide leakage at coal-fired generating plant As featured on Today's Environment on the Discovery Channel, and in the September '95 issue of Powder & Bulk Engineering. Subject PECO Energy Company's Eddystone Generating Plant, Philadelphia, PA area Situation In order to ...


    By HammerTek Corporation

  • Digester Developer Taps Natural Gas Markets

    IN the late 1990s, Dan Eastman and two colleagues were researching business opportunities in the renewable energy industry. They were looking for a commercially viable technology that could take renewable energy from an experimental phase to a solid business investment. In 1999, Eastman and his partners founded Microgy, Inc., with its base in Wisconsin. The company licensed the Xergi anaerobic ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you