small hydraulic power industry Articles

  • Need A Dredge For A Small, Difficult Application?

    SRS Crisafulli’s new shallow draft dredge, the Rotomite SD110, enables operators to dredge in small, shallow, confined areas in a minimum of 17 inches of water. This compact, self-propelled, steerable  machine can dredge just about anywhere without the use of cumbersome cabling. The SD110 is made entirely of aluminum, and is equipped with a hydraulic ram that puts a great amount ...


    By SRS Crisafulli, Inc.

  • Harrison Ford’s Millennium Falcon Accident – Too much Force was awoken in a hydraulically powered door

    In June 2014 the actor was crushed underneath a hydraulically powered door with “the power…. comparable to the weight of a small car” according to a spokesman from the Health & Safety Executive (HSE). The company held responsible for the accident have now pleaded guilty to two health and safety breaches under the Health & Safety at Work Act 1974. The first breach is ...


    By SHEilds Ltd

  • From very big to very small - Case Study

    Graf Plastics GmbH, at its Teningen plant (fig. 1) manufactures its large-volume Carat underground tanks (fig. 2) for rainwater utilization.The manufacture of the containers ranging up to 6,500 litres produces waste, which is reduced in a single phase to mill material using a WLK 30 Super-Jumbo single-shaft shredder from WEIMA Maschinenbau GmbH in Ilsfeld. Rainwater utilization becoming ...


    By WEIMA

  • Economics of tiny thermal power plants

    Thermal power plants is the main source of energy and electricity in India and almost all countries of the world. Most of the giant thermal power plants have capacity of 500MW to 1000 MW. Investment in such giant thermal power plants is Rs 100 million per MW including transmission lines and distribution lines. ( 60 rupees = 1 US$, MW=1000KW). So 1000MW thermal power plant costs Rs 100 million/MW ...


    By AADHUNIK GLOBAL ENERGY

  • New air quality rules challenge oil & natural gas industry

    EPA Administrator signed a suite of proposed new air regulations affecting both the Production/Processing and Transmission/Storage sectors of the oil and natural gas industry. The proposed rules mandate the use of emission controls as well as work practices through two different air regulatory programs – New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous ...


    By Trinity Consultants

  • 4 Key Design Criteria for Jet Mixers

    Jet mixers are widely used in both municipal and industrial wastewater treatment facilities to blend the plant influent and suspend light organic solids in circular equalization tanks.  Other applications for these powerful hydraulic mixers include mixing anoxic tanks and anaerobic reactors with the latter application being for industrial waste streams only. Jet ...


    By KLa Systems, Inc.

  • A Review of Cavitation-Erosion Resistant Weld Surfacing Alloys for Hydroturbines

    AbstractAn improved weld surfacing alloy has been developed and tested to resist cavitation-erosion in hydroturbines. Typical wear characteristics experienced in laboratory testing has been correlated to actual service conditions. A metallurgical evaluation shows that a high strain, work hardening austenitic stainless steel produces superior resistance to cavitational erosion. Several industrial ...


    By Castolin Eutectic

  • Wind Generators as Role Models

    Advanced speed control methods are available for the regulation of wind generators. Working together with SET Sustainable Energy Technologies GmbH, Sulzer made use of one of these new concepts on pumps for the first time and implemented it with great success on a feedwater pump in a refinery. Unregulated pumps consume unnecessary drive energy when demand fluctuates. By controlling ...


    By Sulzer

  • Self-Cleaning Pre-Filtration for RO and Other Membrane Systems

    Abstract A few years ago physical processes could only remove suspended solids from a water stream. Recent advances in technology now allow the removal of selected molecules and ions from a water stream by physical means using membranes. The membrane process has recently become very efficient and economically feasible for many industrial, commercial, municipal and even residential customers. ...

  • Self-Cleaning Pre-Filtration for RO Membrane Systems

    ABSTRACT A few years ago physical processes could only remove suspended solids from a water stream. Recent advances in technology now allow the removal of selected molecules and ions from a water stream by physical means using membranes. The membrane process has recently become very efficient and economically feasible for many industrial, commercial, municipal and even residential customers. ...

  • Rotomite-6000-CD Dredge System - US Copper Mine-case study

    SRS Crisafulli's Integrated Product Solutions - To remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas. And to irrigate farms and ranches. Dredge Rentals. Many customers rent Crisafulli’s Rotomite and FLUMP dredges on ...


    By SRS Crisafulli, Inc.

  • Bigger is Better

    Paul Banfield, Sales Director of Wallingford Software, argues that, for the first time in the history of hydraulic modelling, modellers can now reap the elusive benefits of larger hydraulic models, in turn enhancing the quality of operational and investment decision-making. Introduction A desire for increased accuracy, simplicity and completeness is the primary reason why modellers ...


    By Innovyze

  • Ten top growth markets in air, water and energy

    For suppliers of products and services for the air, water, and energy industries there are some substantial double-digit growth opportunities. Ten of these have been identified as the most promising by the McIlvaine Company These are ranked based on potential market size. #1 Shale Gas There is a very large continuing investment in extraction of gas from shale in the U.S. The ...


    By The McIlvaine Company

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Viscous Pumping in Focus

    The performance of a pump is influenced when it handles viscous fluids such as crude oil. For the configuration and design of pumps, this is key. In the industry, pump performance curves are developed by testing with water at temperatures around 25°C and corrected to a specific gravity of one. Engineers use this standard so that they have comparable measurement values around the ...


    By Sulzer

  • Overbands supplied to SB Waste

    Master Magnets Ltd has recently supplied a permanent and an electro Overband Magnet to a major waste recycling company in Wolverhampton known as SB Waste Management & Recycling Ltd. SB Waste Management & Recycling Limited is one of a largest independent skip hire and recycling companies and was established in 1984. They have vast experience in the recycling industry collecting construction and ...


    By Master Magnets Ltd

  • Advances in flashpoint testing: economic impact

    Flashpoint testing is one of the oldest methods of the ASTM D02 Committee on Petroleum Products and Lubricants, which was formed in 1904. The most prevalent standards are ASTM D56 (Tag Method), D92 (Cleveland Method), and D93 (Pensky-Martens Method). These classical techniques, commonly referred to as open-cup and closedcup methods, share a common principle: A test flame is lowered into the ...

  • Underground gasoline extraction made easier

    The Abanaki PetroXtractor® -Well Oil Skimmer, used for the removal of oil, fuel, and other floating hydrocarbons from water, where access is limited, was recently evaluated by BJAMM Environmental, Inc. of Canal Fulton, Ohio. Working closely with the Ohio EPA and the Bureau of Underground Storage Agency, this group of consultants deal primarily with gasoline stations using underground storage and ...


    By Abanaki Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you