soil remediation chemical Articles

  • Remediation of Explosives in Soil - Case Study

    Client: Department of the Army, U.S. Army Corps of Engineers Site: Ravenna Army Ammunition Plant (“AAP”), Ohio Task: In-situ Rapid Chemical Degradation of Munitions Constituents in Soil by MuniRem® Date: October 2009 Situation The test site is an inactive and ...


    By Planteco, Inc

  • Soil Reclamation Through Chemical Oxidation

    Supplying ozone (chemical) oxidation equipment to clean soil and groundwater is Kerfoot Technologies' specialty. In the past, contaminated soil was dug and removed to a disposal location. Present-day engineering relies increasingly on smart in-situ technologies with minimal site disturbance. Chemical oxidation is at the forefront of those technologies. ...

  • Water and soil remediation using cryogenic process

    Cryogenic process for surface water and soil remediation is a process that remove contaminants through condensation of chemicals with the used of cryogens depending on the temperature requirements for treatment (see Figures 1 through 3). The cryogens usually have very low temperatures below -180oC with normal boiling points, are as follows: liquid nitrogen (-196oC); liquid helium (-268.93oC); ...


    By IWA Publishing

  • In-Situ Anaerobic Remediation of Perchlorate-Impacted Soils

    AbstractARCADIS is currently leading the development, evaluation, and selection of a final groundwater remedy for a 94-acre manufacturing facility in the western U.S. This facility has produced small explosives and vehicular safety products since 1957. As a result of historic operations, soil and groundwater at the site have been impacted by perchlorate. To date, remediation efforts have been ...


    By Arcadis

  • The no. 1 choice for improving the performance of soil and groundwater remediation

    Adsorption of Contamination The number one challenge associated with most site remediation designs and methodologies is that 90% to 95% of all environmental contaminants; including hydrocarbons (LNAPL), chlorinates (DNAPL), and heavy metals; are present in a sorbed (i.e., absorbed or adsorbed) phase onto soil and bedrock surfaces within both saturated and unsaturated zones. As such, the absorbed ...


    By Ivey International Inc.

  • In situ Chemical Oxidation: An Innovative Groundwater Remediation Technology

    A promising new technology, in situ Chemical Oxidation (ISCO), has the potential to supplant the more widely used pump-and-treat groundwater remediation technology by destroying groundwater contamination in situ (in place). ISCO is the process of oxidizing contaminants in the groundwater and soil by injecting water containing high concentrations of an oxidant to the site of the contamination. ...


    By AECOM

  • Soil Attenuation Model for Derivation of Risk-Based Soil Remediation Standards

    Untitled Document Overview of Soil Attenuation Model (SAM) Under a risk-based corrective action (RBCA) process, soils and groundwater impacted by a chemical release are ...


  • A Chemical Dynamics Model for CAH Remediation with Polylactate Esters.

    ABSTRACT: The polylactate esters of sorbitol, xylitol and glycerol are a class of new chemical compounds that slowly release lactic acid into groundwater. The lactic acid is biotransformed into pyruvic acid and subsequently into acetic acid releasing hydrogen in both steps. The hydrogen is used by naturally occurring dechlorinating bacteria to reduce PCE to ethene by way of TCE, DCE and VC. A ...


    By REGENESIS

  • Explosives remediation at Pueblo Chemical Depot changes course

    Treatment of soil and groundwater contaminated by energetic compounds has been underway since 1997 at area of interest (AOI) 3B of the Pueblo Chemical Depot (PCD) in Colorado. AOI 3B is part of the source of an explosives-contaminated groundwater plume. Initial work involved excavation and onsite composting of soil to address the contaminant source. In 2001, a pump and treat system using granular ...

  • The Progression of Remediation

    Environmental remediation involves the cleanup of contaminated ground water and/or soils impacted by a variety of contaminates. The predominate contaminates over the years have been petroleum hydrocarbons from leaking underground storage tanks and surface spills, as well as solvents and other volatile organic compounds (VOCs) from industrial processes. Today, the most effective, practical, and ...


    By EPG Companies Inc.

  • Groundwater Remediation

    Groundwater remediation or clean-up is required when concentrations of contaminants exceed or are expected to exceed predetermined levels for the type of resource that is impacted (Grossman et.al., 2008). For example, lead levels in drinking water should not exceed the EPA action level of 0.015 mg/L. What caused the high levels of lead? How can the lead be removed from the aquifer? (Grossman ...


    By IWA Publishing

  • In Situ Physical/Chemical Treatment for Soil, Sediment, and Sludge

    The main advantage of in situ treatment is that it allows soil to be treated without being excavated and transported, resulting in potentially significant cost savings. However, in situ treatment generally requires longer time periods, and there is less certainty about the uniformity of treatment because of the variability in soil and aquifer characteristics and because the efficacy of the ...

  • Evaluation of sodium lignosulphonate for the remediation of chromium–contaminated soil and water

    Commercial sodium lignosulphonate, a by–product of sulphite pulp leaching, was evaluated for the remediation of soil and water contaminated with hexavalent chromium. Two series of bench–scale tests were performed: (a) removal of chromium from water using reagent binding and membrane separation; and (b) stabilisation of chromium in the soil using chemical soil flushing. Water treatment tests were ...


    By Inderscience Publishers

  • Surfactant enhanced in-situ remediation of DNAPL impacted soil and groundwater - Montreal refinery

    Abstract A Montreal chemical refinery reduced the dichlorobenzene and other dense non-aqueous phase liquid (DNAPL) impacts on the soil and groundwater where a railway line is adjacent to an above ground storage tank farm. Ivey-sol® surfactant mixtures were injected three times during a two week pilot test, into a series of in-situ wells. The soil and groundwater matrix experienced ...


    By Ivey International Inc.

  • Rushing Remediation - Cometabolic bioremediation accelerates natural degradation of groundwater and soil contaminants

    Untitled Document Field studies have shown that many organic contaminants degrade naturally by microorganisms present in soil and groundwater. This naturally occurring bioremediation, known ...


    By CL Solutions, LLC

  • Sonic Environmental Files Process Patents for Remediation of PCB Contaminated Soils

    Untitled Document Sonic Environmental Solutions Inc. (SNV.TSX Venture) today announced that the process definition phase of testing of the Company’s main application to remediate PCB ...


  • Multifunctional Well Implemented for In Situ Remediation of Hydrocarbon Contaminations in Soil and Groundwater

    Abstract A recently developed Multifunctional Well has been implemented for the remediation of subsurface contamination caused by hydrocarbon spills. Four different remediation processes can be operated within the same well. At optimal efficiency of each remediation process, successive treatment of the capillary fringes, the vadose zone, and the aquifer can be accomplished. Each treatment ...


  • Electrical Resistance Heating: a Hot New Approach to Soil and Groundwater Remediation

    Electrical Resistance Heating (ERH) is an aggressive remediation technology that can quickly reduce the mass of volatile organic compounds (VOCs) in soil and groundwater by over 99%. The process is often used to clean sites where other technologies have had limited success. Larger ERH sites are cleaned within 6 to 12 months and smaller sites can be cleaned in half that time or ...


    By TRS Group, Inc.

  • Soil Flushing

    Introduction In situ soil flushing is the extraction of contaminants from the soil with water or other suitable aqueous solutions. Soil flushing is accomplished by passing the extraction fluid through in-place soils using an injection or infiltration process. Extraction fluids must be recovered from the underlying aquifer and, when possible, they are recycled. Cosolvent Enhancement Cosolvent ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you