solid flow meter Articles

  • Flowmeter Portable Handhold Ultrasonic Flow Meter

    The Technologists from A.YITE Electronic(America) Laboratory, have done much efforts to design portable ultrasonic flowmeter, we would like to supply suitable measurement for the travelling engineer.  There is no moving part in the EU-109H ultrasonic instrument, which is a kind of movable and reliable static instrument. With its accuracy up to 0.8% and comparatively large dynamic ...


    By A.YITE Technology

  • Stormwater Solids Reduction for NPDES Permits

    Finally obtaining a National Pollution Discharge Elimination System (NPDES) Permit is often a relief but is by far not the end of the story. Meeting the requirements of that permit often proves to be quite difficult and stiff fines are freely doled out to those who fail to meet regulatory limits. For one Midwest jet propulsion manufacturing facility, the issue of total daily solids discharge ...

  • Attenuation of an ultrasonic beam by suspended particles and range of acoustic flow meters in sewer networks

    Ultrasonic flow meters are commonly used in wastewater management. Under certain circumstances, a reduction in the flow meter range may occur and cause significant error in the flow rate measurement. Attenuation due to suspended particles is one of the phenomena capable of reducing the flow meter range. The present paper examines attenuation resulting from re-suspended pond sediment over a wide ...


    By IWA Publishing

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Residential SSO To High Solids Anaerobic Digestion

    Source separated organics, including kitchen and garden waste, are processed in a dry AD plant. Resulting biomethane is injected into an adjacent natural gas pipeline. Winterthur, a city in the canton of Zürich in northern Switzerland, has the country’s sixth largest population, estimated at more than 100,000. In 2011, the City of Winterthur launched a 2050 energy policy to ...


    By BioCycle Magazine

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Open Channel Flow - The use of Level sensors for open channel flow measurement

    Open Channel Flow - The use of Level sensors for open channel flow measurement Level sensors from SolidAT are implemented in Open Channel Flow applications. In these types of applications, the level sensor is installed above a special water flow structure and accurately measures level of flowing water or wastewater. The sensor then calculates flow through the structure ...

  • Two Technologies for Flow Measurement from Outside a Pipe

    Doppler and Transit Time are two very popular types of flow meter for non-invasive measurement of flow in full pipes. We tend to confuse these technologies because they are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. In the real world they actually work best in opposite applications. Success in your installation depends on understanding the ...


    By Greyline Instruments Inc.

  • Accurate management of waste water flow case study

    SmartScan 50O provides an accurate ultrasonic solution for flow measurement of waste water in a nation-wide advanced treatment plant. This wastewater treatment plant is located just outside a pop. 1 Million City. The plant provides wastewater treatment services for the municipality since 1999. The plant utilizes the latest technology of wastewater treatment that enables purification of ...

  • Biologically and Chemically Enhanced Clarification for Improved Treatment of Wet-Weather Flows

    The Milwaukee Metropolitan Sewerage District (MMSD) conducted demonstration testing in 2005 to evaluate high-rate chemically enhanced clarification (CEC) followed by ultraviolet (UV) disinfection, for the treatment of wet-weather flows at MMSD’s two wastewater treatment plants (WWTPs). High-rate CEC—surface overflow rates greater than 20 gallons per minute (gpm) per square foot (ft2) [85 cubic ...

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • Portland Cement Manufacturer Upgrades Technology,Improves Operation and Reduces Costs

    One of the largest Cement factories in America was interested in reducing frequent visual emissions inspections mandated by new Portland Cement (MACT) rules in effect since June 2002. A second issue was the need to measure solids flow in the finish mill operation to determine the rejects flow rate. During a recent upgrade to the finish mill circuit, the rejects flow, which is traditionally ...


    By Auburn Systems, LLC

  • Quarry dewatering compliance

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 liters per day. ...


    By Greyline Instruments Inc.

  • Quarry Dewatering Compliance

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering ...


    By Greyline Instruments Inc.

  • Activated Sludge Treatment Plant - Eatonton, Georgia - Case Study

    Solids management at municipal wastewater treatment plants is crucial in maintaining operating efficiencies and permitted discharge levels. Drying beds and mechanical methods of dewatering bio-solids can be labor intensive and inefficient for rapid solids removal. Miratech Geotube" Dewatering Technology offers munic-ipalities a cost effective solution for rapid solids removal and long term solids ...

  • Pilot-scale studies on the treatment of tannery effluents by electroflotation

    A pilot-scale electroflotation system with a treatment capacity of 0.8 m³ per hour has been designed and built. The system is equipped with a conditioning tank, a rectifier, flow meters, an energy meter and pumps. Iron, aluminium and titanium coated with oxides of tantalum, ruthenium and iridium were used as electrodes. The system was installed within the premises of the Common Effluent Treatment ...


    By Inderscience Publishers

  • Fluoridation: A Better Way? case study

    Ffficient, cost-effective addition of fluoride to drinking water is increasingly important as the U.S. EPA and Department of Health and Human Services contemplate additional nationwide standards for fluoride injection. A relatively new company, Integrity Municipal Services (IMS), has developed a new design for sodium fluoride saturator and feed systems and has successfully applied it at customer ...


    By Integrity Municipal Systems

  • Water testing 101: TDS

    According to Wikipedia, total dissolved solids (TDS) is defined as “the combined content of all inorganic and organic substances contained in a liquid that are present in a molecular, ionized or microgranular suspended form.” The article goes on to state that “total dissolved solids are differentiated from total suspended solids (TSS) in that the latter cannot pass through a ...


    By HM Digital, Inc.

  • Get the scoop on the newest technology for the measurement of pH

    SENTRON had its 20th birthday in April 2005 and is world wide known as the manufacturer of glass free ISFET (Ion Sensitive Field Effect Transistor) pH systems. During the 20 years we developed and manufactured not only ISFET pH sensors but also pressure sensors in our own silicon chip production facility. This facility for development and manufacturing of solid-state sensors, enables us to ...


    By Sentron Europe BV

  • Dredging the Hunsingo canal with Geotube - Case Study

    The Challenge The Hunsingo canal is situated in the northern part of Holland in the province Groningen. The canal had to be dredged because the water depth was not sufficient for the ships coming through and the regulations with regard to the water-balance in the region. A part of the canal is flowing through the centres of two village's, Zoutkamp and Ulrum. In these areas there ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you