solid recovered fuel production Articles

  • Case study - Thermoteam – Austria - SRF Refining (Solid Recovered Fuels)

    Customer Thermoteam is a joint venture of Lafarge and Saubermacher. The business objective is the production of Solid Recovered Fuels (SRF) at the location of Retznei (South of Styria) close to the cement works of Lafarge in Austria. Thermoteam has capacity and permission to process 99,500 tonnes of waste per year. The input material varies between pre-treated ...

  • Case study - MÜLLEX-Umwelt-Säuberung-GmbH – Austria SRF Refining (Solid Recovered Fuels)

    Customer Thermoteam is a join! venture of Lafarge and Saubermacher. The business objective is the production of Solid Recovered Fuels (SRF) at the location of Retznei (South of Styria) close to the cement works of Lafarge in Austria. Thermoteam has capacity and permission to process 99,500 tonnes of waste per year. The input material varies between pre-treated mixed trade ...

  • VSEP recovers fuel and creates a clean water stream that exceeds discharge requirements

    Fuel storage tank bottom water (FSTBW) is one of several types of petroleum contaminated wastewater sources that can be treated using V✧SEP technology. The source of FSTBW, as suggested by its name, is simply water that separates from petroleum products that are being stored and transported in large quantities. This water that is periodically removed from the storage tanks in order to be ...


    By New Logic Research, Inc.

  • Turning wood chips and sawdust into a valuable solid fuel

    RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...

  • Recovering Valuable Chemicals from Air Emissions

    Air emissions in many cases are a waste of valuable natural resources that should have become useful chemicals. In some cases the economic payback from recycling/reuse of air emissions can be almost as much a motivation to control air pollution as government regulations. Examples of recycling and reuse of air emissions are sulfur oxides emissions that can be made into sulfuric acid, cement ...


  • Solar powered solid oxide fuel cell with thermoelectric generator

    Durable, location independent, environmental–friendly sources of energy which allow for modular, few moving parts, low operating noise, high electricity generation efficiency and compact technology are highly desirable. Solid oxide fuel cells (SOFCs) are promising for such energy system development, since they are energy efficient and, if pure hydrogen is used, have virtually no emissions of ...


    By Inderscience Publishers

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • Landfill gas to fleet fuel in Ohio

    In mid-September, the Solid Waste Authority of Columbus, Ohio (SWACO) cut the ribbon on Phase I of its Green Energy Center that will convert landfill gas to compressed natural gas (CNG) for use in CNG-powered cars and medium duty trucks. The facility will produce enough CNG annually to replace almost 250,000 gallons of gasoline, plus additional natural gas sufficient to generate electricity for ...


    By BioCycle Magazine

  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • Common Treatment Technologies for Fuels in Soil, Sediment, and Sludge

    Common treatment technologies for fuels in soil, sediment, and sludge include biodegradation, incineration, SVE, and low temperature thermal desorption. Incineration is typically used when chlorinated SVOCs are also present with fuel, and not specified for fuel-only contaminated soil, sediment, or sludge. All types of biodegradation, both in situ or ex situ, can be used to remediate soils: ...

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • The Waste Industry: Refuse Derived Fuel Hits a New Level

    The Environment Agency published the final data up to the end of December 2014 in February. It shows that the overall tonnage of RDF sent overseas throughout the year topped 2,373,611 tonnes. The figures confirm the rapid growth in demand for RDF from operators in the UK from European energy from waste facilities, with 2014 continuing the trend of increasing exports to facilities overseas. RDF is ...


    By GPT Waste Management Ltd

  • Entrepreneurs Expand Markets for Recycled Products

    Beyond Waste in Santa Rosa, California demonstrates that reuse deconstruction in the mainstream construction industry can be a money-making prospect — by getting paid to take the building apart and from the sale of recovered materials. Beyond Waste’s first “high profile” project was at the Presidio, a former Army base located on the south shore of the Golden Gate entrance to the San Francisco ...


    By BioCycle Magazine

  • Sorting and Recycling Municipal Solid Waste (MSW) in Xiamen City, China - Case Study

    TOMRA Sorting Recycling is playing a pivotal role in the implementation of automatic sorting at the MSW plant in Xiamen Background The city of Xiamen, renowned for its natural beauty, is located on China's southeast coast, in Fujian Province. Its famous seascape and clean natural environment are a magnet for tourists, and the city government wants to keep things ...


    By TOMRA Sorting GmbH.

  • Holcim: SRF production with UNTHA shredders in Vietnam

    Work is underway to commission a Solid Recovered Fuel (SRF) manufacturing plant in Vietnam, for one of the world’s leading cement and aggregates specialists, Holcim. The plant will process solid footwear production waste from the country’s main shoe factory, to create a fossil fuel substitute that will power Holcim’s local cement kiln calciner. Following a global ...


    By UNTHA Shredding Technology

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

  • Biomethane production at Ontario wastewater treatment plant

    The City of Hamilton is purifying biogas and injecting it into the grid, while continuing to generate power and recover heat from its CHP system. Hamilton, Ontario, has long been a leader in producing biogas from its sewage and storm water wastes. Half a century ago, the city of 520,000 began processing sludge from its sprawling Woodward Avenue Wastewater Treatment Plant through anaerobic ...


    By BioCycle Magazine

  • Doubling the SRF production capacity with TANA Shark

    A company in France operating in landfill, waste management and fuel production businesses produces SRF (Solid Recovered Fuel) from unsorted industrial waste for their own mill. The key for improving productivity of all these three business areas is a more effective shredding process to increase the low SRF production capacity. TANA ran a demonstration at their site and the results show that ...


    By Tana Oy

  • Comparative evaluation of conventional and microwave hydrothermal carbonization of human biowaste for value recovery

    This paper compares conventional and microwave hydrothermal carbonization (HTC) of human biowaste (HBW) at 160 °C, 180 °C and 200 °C as a potential technology to recover valuable carbonaceous solid fuel char and organic-rich liquor. Also discussed are the influence of HTC heating methods and temperature on HBW processing conversion into solid fuel char, i.e. yield and post-HTC management, ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you