solid waste industry Articles

  • Shredding Puzzle in the Process of Waste Material Recycling

    There are two main types of waste fabric waste: (1) the factory in the leather fabric processing and production of leather fabric can not be 100% of the use, so in the production of some by-products or waste, such as tailoring and sewing clothes when the extra cloth, cloth and other waste , As well as in the synthesis of chemical fiber in the process of excess waste and so ...


    By Harden Industries Ltd.

  • How industrial water filtration can improve efficiency and save you money

    Over the course of the past couple of decades, industrial water filtration has become one of the most important considerations for the average manufacturing facility in North America. These concerns have only increased as water supplies have dwindled and wastewater contamination standards have become more stringent. All of this has led to the need to choose the right industrial water filters and ...


    By Filtra Systems

  • Industrial Solid Waste Disposal in China

    Abstract This paper investigates the current situation of industrial solid waste disposal in China. Recent Chinese literature about industrial solid waste disposal in China has been revieved and data are analysed on the amount of industrial solid waste production and disposal in Wuhan City in 1992. The results show a rapid increase in the total amount of industrial solid wastes in China: It was ...


  • Evaluation of rational industrial solid waste abatement in China

    Industrial Solid Waste (ISW) abatement is attracting wide attention, with its generation increasing rapidly in China. In this paper, we calculate the ISW rational abatement ratio (IRAR) of 30 regions in China from 1990 to 2005, by applying Data Envelopment Analysis (DEA). Results show that, the Eastern, Central and Western areas have the lowest, medium and highest 1990?2005 average IRAR (15.04%, ...


    By Inderscience Publishers

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • The Trumpcard of Solid Waste management

    Solid waste management, when you heard about this word - you will be able to see a dump yard picture infront of you. And most of us are thinking that it is an an optimistic one to give solutions for solid waste management.  "Every problem is an opportunity" EcoCare Takes this slogan to bring up various solution to solve ...


    By EcoCare Technologies

  • Municipal solid waste management

    Management of Municipal Solid Waste (MSW) is one of the most basic obligatory functions of the Urban Local Bodies. In most of the cities, however, the standard of waste management needs improvement. The environmental and health hazards caused by the unsanitary conditions in the cities were epitomised by the episode of plague in Surat in 1994. That triggered public interest litigation in the ...


    By Jindal power ltd.

  • Solid waste routing

    In today’s struggling economy we are all forced to look at ways to reduce expenses. This applies to private and public operations equally. For the private operation, priorities are placed on maintaining profits—a difficult task in a competitive industry. Raising rates is typically met with resistance from customers, as well as opens a door for competitors to move in. For the public ...


    By Waste Advantage Magazine

  • Solid waste industry reduces fatalities and injuries

    The most recent data from 2009 for the solid waste industry1 indicate that occupational fatalities have decreased substantially and the downward trend in days-away-from-work injuries and illnesses continues.2 These data, which are recorded by the Bureau of Labor Statistics (BLS), are encouraging. Yet the industry remains one of the top 10 most hazardous in the U.S. The total number of fatalities ...


    By Waste Advantage Magazine

  • Development of a master plan for industrial solid waste management

    Rapid industrial growth in the province of Khuzestan in the south west of Iran has resulted in disposal of about 1750 tons of solid waste per day. Most of these industrial solid wastes including hazardous wastes are disposed without considering environmental issues. This has contributed considerably to the pollution of the environment. This paper introduces a framework in which to develop a ...

  • Methods of Purification by Water Innovations, Inc.

    Carbon Filtration is used for several reasons. Its primary purpose is the reduction of chlorine to less than 0.1 ppm. Chorine can damage softener resins, reverse osmosis membranes, and mixed bed deionization resins. Activated carbon will also help control tastes and odors, provide organic and hazardous organic chemical reduction, and some particulate reduction. ...


    By Water Innovations, Inc

  • Municipal solid waste management in India

    Management of Municipal Solid Waste (MSW) is one of the most basic obligatory functions of the Urban Local Bodies. In most of the cities, however, the standard of waste management needs improvement. The environmental and health hazards caused by the unsanitary conditions in the cities were epitomised by the episode of plague in Surat in 1994. That triggered public interest litigation in the ...


  • New solid waste definition proposed

    When the Boiler MACT rule was vacated in 2007, one key element in the court challenge was that many non-fossil fuel materials burned in industrial boilers should be classified as solid wastes and regulated accordingly. Along with the recently proposed Boiler MACT and rules for commercial/industrial/solid waste incinerators (CISWI), EPA proposed criteria to determine whether non-hazardous ...


    By Trinity Consultants

  • Review of the use of paper clay in the solid waste industry: physical and chemical properties

    The purpose of the paper is to give an overview of utilisation of paper clay, or paper sludge, in Northeastern USA. This paper will outline typical landfill cover practices, overview the paper-making process, discuss the waste generated by the paper industry, and discuss the beneficial uses of paper clays.Keywords: paper clay, paper sludge, landfills, permeability, construction, design, frost, ...


    By Inderscience Publishers

  • Solid waste management project in the building industry: analysing existing proposals

    Construction waste (CW) has become a world concern resulting in different problems associated with its massive production and inappropriate disposal. As a result, there are negative impacts on environmental and social issues in urban areas. Therefore it is of utmost importance that firms develop building industry solid waste management projects on their building sites in order to combat this ...


    By Inderscience Publishers

  • The current situation of solid waste management in China

    With economic development, the quantity of solid waste is increasing rapidly in China; the total quantities of municipal solid waste (MSW), industrial solid waste (ISW), and hazardous waste (HW) in 2002 were 136.5 million tons, 945 million tons, and 10 million tons, respectively. In 2002, the quantity of MSW disposed of was 74.04 million tons, 89.30% of which was landfilled, 3.72% was ...


    By Springer

  • Solid waste management in tabriz petrochemical complex

    Petrochemical industries, like other waste sources, are associated with numerous waste-related environmental problems. However, petrochemical solid waste is generally associated with more hazardous constituents, and accordingly carries a higher level of public health and environmental risk potential. In the last decade, the global economy has undergone radical changes that have had significant ...


    By University of Tehran

  • Boilers, Solid Waste, and the CAA....Oh My!

    Boilers, Solid Waste, and the CAA....Oh My!   ...


    By All4 Inc.

  • Solid waste management strategies and global sustainability of deconstruction

    This paper provides a proof that higher diversion rates of Construction and Demolition (C&D) waste from the US landfill sites are not only good from a sustainability standpoint but also an achievable goal. When deconstruction occurs, proper planning should start to take advantage of all technologies and processes available for recycling and reuse along with the emerging markets for transformed ...


    By Inderscience Publishers

  • Municipal solid waste and recovery potential: Bangladesh perspective

    Rapid urbanization and population growth are largely responsible for very high increasing rate of MSW generation in the urban areas of Bangladesh, one of the densely populated Least Developed Asian Countries (LDACs). These scenario posses a social, environmental and professional threat for city dwellers, urban planners, development authorities and other concerned stakeholders. In Bangladesh, a ...


    By University of Tehran

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you