solid waste separation Articles

  • Separation

    Introduction: Ex situ separation can be performed by many processes. Gravity separation and sieving/physical separation are two well-developed processes that have long been primary methods for treating municipal wastewaters. Magnetic separation, on the other hand, is a much newer separation process that is still being tested. Gravity Separation Gravity ...

  • Solid waste routing

    In today’s struggling economy we are all forced to look at ways to reduce expenses. This applies to private and public operations equally. For the private operation, priorities are placed on maintaining profits—a difficult task in a competitive industry. Raising rates is typically met with resistance from customers, as well as opens a door for competitors to move in. For the public ...


    By Waste Advantage Magazine

  • Towards municipal solid waste source separation at the household level in Accra, Ghana

    Municipal solid waste source separation at the household level has been endorsed as the way forward by all stakeholders in the waste management sector in Ghana. The study using waste stream analyses and laboratory investigations assesses the feasibility of this intervention in the Accra Metropolitan Area which has been divided into three income zones. The mean waste percentage composition was ...


    By Inderscience Publishers

  • Robust corona-electrostatic separation method for solid waste recycling

    The objective was to reduce variation in the outcome of a corona-electrostatic separation process for solid waste recycling by finding operating conditions (high-voltage level, roll speed, splitter position) under which uncontrollable variation in 'noise factors' (ambient humidity, metal content in the feed) has minimal impact on the quantity and the quality of the recovered products. The samples ...


    By Inderscience Publishers

  • Anaerobic fermentation of organic solid wastes: volatile fatty acid production and separation

    Anaerobic fermentation of organic municipal solid waste was investigated using a leach-bed reactor (LBR) to assess the volatile fatty acid (VFA) production efficiency. The leachate recycle rate in the LBR affected the VFA composition of the leachate. A six-fold increase in the recycle rate resulted in an increase of the acetic acid fraction of leachate from 24.7 to 43.0%. The separation ...


    By IWA Publishing

  • Pulp & Paper Water Treatment - A look at optimizing water resource management

    Application Case Study (Pulp/Paper Operations) The pulp and paper industry has traditionally been a consumer of large amounts of fresh water and power. Recently, increased focus has been given to the optimized efficiency of paper mills and to the environmental sustainability footprint of the industry. Therefore, water resource management has become a more critical factor ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Specific Technologies for Separation of Recyclable Materials From Municipal Solid Waste (MSW), Applicable in Bucharest - Romania

    Urban waste usually comes from household and public activities that mean private lodgings, shops, hotels, restaurants, offices, etc. Taking into consideration the year 2000 as a standard level, we estimate about 11,200 t/day of urban waste to be produced in Romania, from which about 2,200 t/day only in ...


  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Investigation the potential of recycling urban solid wastes

    Recycling is a solution to control the problem of managing urban solid wastes such as incineration and sanitary landfill. It consists re-processing of products and materials, which have been consumed several times. The methods which are presently used for recycling and processing the wastes of Ardakan City consists of collection by wastes collectors, separation by urban service labors and ...


  • Municipal Solid Waste – Key to a Low Carbon Economy

    A newly released report has found the waste sector has a key role to play in the development of a low carbon economy and the reduction of greenhouse gases (GHGs). This report comes in advance of the UN Climate Conference in Paris, which will take place in December. The report was ...


    By Zero Waste Europe

  • Investigation of the potential of recycling urban solid wastes

    Recycling is a solution to control the problem of managing urban solid wastes such as incineration and sanitary landfill. It consists re-processing of products and materials, which have been consumed several times. The methods which are presently used for recycling and processing the wastes of Ardakan City consists of collection by wastes collectors, separation by urban service labors and ...


  • Municipal solid waste - waste to energy conversion in India: an overview

    Municipal solid waste (MSW) is generated in enormous quantities, in India, causing environmental problems. It is collected primarily by sweeping in India and dumped on the outskirts of urban areas, which pollute the environment. Such MSWs also release methane and carbon dioxide, which are important greenhouse gases. MSW comprises biodegradable material. The MSW disposal methods in India mainly ...


    By Inderscience Publishers

  • Recycling of plastic waste by density separation: Prospects for optimization

    A review of existing industrial processing and results of alternative processing investigations for separating solid mixtures and specifically recycling plastic waste by density separation is presented. Media density separation is shown to be fundamental for separation and/or pre-concentration in the recycling of plastics. The current use of static media processes limits the capacity and size of ...


    By SAGE Publications

  • Extraction of fuel from municipality solid wastes using an updraft gasifier

    In Bangladesh, cities are confronted with the problem of how to dispose large quantities of municipal solid waste (MSW). Gasification is a process that uses heat, pressure and steam to convert materials (MSW) directly into a gas composed primarily of carbon monoxide and hydrogen. The main objectives of this paper are: 1) to study gasification processes; 2) to design, fabrication and performance ...


    By Inderscience Publishers

  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • Application of LCA to support solid waste management policy in Phuket

    Life Cycle Assessment (LCA) is employed to evaluate the environmental performance of the existing Municipal Solid Waste (MSW) management system in Phuket and compared with different possible alternative Integrated Waste Management Systems (IWMSs). The results show that the scenario comprising source separation of waste for anaerobic digestion and recycling plus incineration (with energy recovery) ...


    By Inderscience Publishers

  • Disposal options for solid waste of Bangalore city based on its characteristics

    A detailed analysis of Bangalore's solid waste has been done to suggest various management options for safe disposal. It has been observed that Bangalore's solid waste contains a larger proportion of degradable waste compared to many other cities. Based on detailed analysis of available data, it has been suggested that a landfill with a leachate and gas collection system is better than an inert ...


    By Inderscience Publishers

  • Solid Waste Management: A Case Study of National Refinery Limited

    Investigations have been carried out to assess and characterize the waste being generated in one of the largest petrochemical refinery of Pakistan. It was found that the refinery complex generates about 2000 metric tons of solid waste and about 0.55 million gallons of waste water per day. Besides these gaseous pollutants like H2S, CO, CO2 NO2, and particulate matter are also emitted in the ...


  • New guidelines for characterization of municipal solid waste: the Portuguese case

    This report proposes a new set of guidelines for the characterization of municipal solid waste. It is based on an analysis of reference methodologies, used internationally, and a case study of Valorsul (a company that handles recovery and treatment of solid waste in the North Lisbon Metropolitan Area). In particular, the suggested guidelines present a new definition of the waste to be analysed, ...


    By SAGE Publications

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you