solvent flow meter Articles

  • Solvent Recovery System Keeps Presses Rolling at World`s Largest Gravure Printing Plant

    When QUAD/GRAPHICS Inc. entered the publication gravure printing market, it followed the axiom of Daniel Burnham, the 19th century architect and urban planner, to 'make no small plans.' In 1985, the Pewaukee, Wis.-based printing company purchased two 96-inch web, eight-color, high-speed presses and installed them at its new printing plant in Lomira, Wis., near Milwaukee. Conventional wisdom at ...

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • The POROLUX “true” First Bubble Point detection mode application note

    The POROLUX 1000 is a research grade capillary flow porometer with very pressure and flow control and accuracy. In the POROLUX 1000 a porous sample is inserted, wetted with a so-called wetting liquid. The sample is usually a flat round disk, three different diameters are standard: 13, 25 and 47 mm. Custom made sample holders are optional. The wetting liquid is a liquid which fills up all pores of ...


  • Treatment of high strength resin production wastewater case study

    Problem Full-scale Incineration of this wastewater had proved very expensive due to the fuel input required and the ongoing incinerator maintenance costs. The polymer manufacturer sought treatment alternatives to save money. Initial biotreatment pilot work indicated that biotreatment was not feasible using conventional activated sludge technology even when the concentrated wastewater was ...


    By Bioscience, Inc.

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • 3-D Microemulsion (3DMe)™ Superior Distribution: Cost-Effective Treatment of Large Plumes

    3-D Microemulsion (3DMe)™, a form of HRC Advanced®, is the current state-of-the-art in slow-release electron donor products for the in-situ treatment of chlorinated solvents in groundwater. By employing a sequential, staged release of hydrogen, 3DMe provides an immediate and long-term release of hydrogen for enhanced longevity. Equally as important is the compound’s unique self-distribution ...


    By REGENESIS

  • Using On-Site Biological Methods to Clean Up Soil

    Decontamination companies and researchers in France are working to restore polluted soil using treatments that range from biological methods to soil washing and incineration. The problem of polluted soil was dramatically illustrated prior to construction of the Stade de France soccer stadium built for the 1998 World Cup. The location of the site, on industrial wasteland just north of Paris, ...


    By BioCycle Magazine

  • Biological Treatment Technologies

    Decontamination companies and researchers in France are working to restore polluted soil using treatments that range from biological methods to soil washing and incineration. The problem of polluted soil was dramatically illustrated prior to construction of the Stade de France soccer stadium built for the 1998 World Cup. The location of the site, on industrial wasteland just north of Paris, ...

  • Ambient Air Sampling Methods

    Pollutants are nothing but any substance that may present in an atmosphere in such a concentration that it may harmful to surrounding, living organism or human being. Sampling and analysis of air pollutants is known as Air quality monitoring and it is major part of environmental monitoring. There are many advanced types of ambient air Sampling methods. we will learn here only which are most ...


    By Perfect Pollucon Services

  • Vinyl Chloride Attenuation By Direct Injection of Time-Release Magnesium Peroxide.

    ABSTRACT: This case study shows that there is potential to remediate dissolved vinyl chloride by oxygenation in the field. Residual vinyl chloride concentrations have been remediated in the field at a mid-western site with a phosphate-intercalated peroxygen (ORC®, a proprietary formulation of magnesium peroxide that releases oxygen slowly). The site was formerly operated as an aluminum coating ...


    By REGENESIS

  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • What do oil sands and shale gas have in common? Acute need for sustainable water management solutions

    The world’s appetite for fossil fuels is not abating anytime soon, and the alternatives fall short. Nuclear energy makes people uneasy, coal is perceived as not being that clean, hydroelectric requires massive capital outlays, solar is still improving and the wind just doesn’t always blow. For the foreseeable future, North Americans have embraced the idea that expanded production of ...


    By Biolargo, Inc.

  • American Upstart Filter Brand Competing with the Majors

    Flexotherm® has expanded its product line in the highly competitive filtration market.  The company now offers 2,900 different filter elements including coalescers, particulate, adsorbers, general purpose and high temperature filters. ...


    By Neptech Inc.

  • Bioventing

    Introduction Bioventing is a promising new technology that stimulates the natural in situ biodegradation of any aerobically degradable compounds in soil by providing oxygen to existing soil microorganisms. In contrast to soil vapor vacuum extraction, bioventing uses low air flow rates to provide only enough oxygen to sustain microbial activity. Oxygen is most commonly supplied through direct air ...

  • Enhanced Bioremediation

    Introduction Enhanced bioremediation is a process in which indigenous or inoculated micro-organisms (e.g., fungi, bacteria, and other microbes) degrade (metabolize) organic contaminants found in soil and/or ground water, converting them to innocuous end products. Nutrients, oxygen, or other amendments may be used to enhance bioremediation and contaminant desorption from subsurface materials. ...

  • Former Dry Cleaning Site Contaminated with PCE - Case Study

    In-Situ® Inc. TROLL® 9500 Multiparameter Sonde helps resolve treatment challenges and saves $200,000 in drilling, reagents, and consulting. A former dry-cleaning site in the Pacific Northwest, Ultra Custom Care Cleaners, was found to be contaminated with PCE (perchloroethylene). According to the U.S. Geological Survey (USGS), PCE was widely used in the dry cleaning of fabrics since the ...


    By In-Situ, Inc.

  • Emerging Trends In UV Disinfection For Water Treatment

    Introduction The UV disinfection industry has experienced tremendous growth over the last 20 years.  The development of new UV technologies over this period has been a perfect example of an industry investing to meet market demand – in this case demand for an effective, low cost, and environmentally friendly disinfection technology.  The acceptance of UV disinfection at water plants ...

  • A Citizen`s Guide to Bioremediation

    What is bioremediation? Bioremediation is a treatment process that uses naturally occurring microorganisms (yeast, fungi, or bacteria) to break down, or degrade, hazardous substances into less toxic or nontoxic substances. Microorganisms, just like humans, eat and digest organic substances for nutrients and energy. In chemical terms, 'organic' compounds are those that contain carbon and hydrogen ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you