solvent recovery system Articles

  • Software Provides Insight into Solvent Recovery Operation

    When World Color Press, Dyersburg, TN, decided to replace its outdated computerized supervisory control system for its large solvent recovery operation, it turned to AMCEC Inc., Lisle, IL. World Color Press wanted a system that would provide uncomplicated screens and flexible graphic importing. It also wanted to avoid long hours of training. A solution was found in an object-based automation ...


    By AMCEC Inc.

  • Solvent Recovery in Flexographic Printing: Fildes Pty Ltd

     Background Fildes Pty Ltd is a long established, family owned company, located in Sandringham, Victoria. Fildes manufacture quality labels, bags and retail packaging. The company currently supplies 90 per cent of the Australian pharmacy market, as well as packaging for a wide range of high profile retailers. The Process As part of the ...


  • Solvent Recovery System Keeps Presses Rolling at World`s Largest Gravure Printing Plant

    When QUAD/GRAPHICS Inc. entered the publication gravure printing market, it followed the axiom of Daniel Burnham, the 19th century architect and urban planner, to 'make no small plans.' In 1985, the Pewaukee, Wis.-based printing company purchased two 96-inch web, eight-color, high-speed presses and installed them at its new printing plant in Lomira, Wis., near Milwaukee. Conventional wisdom at ...


    By AMCEC Inc.

  • Chlorinated solvents: methylene chloride and TCE

    Introduction This paper presents the results of a scaled and phased approach to source remediation of high concentrations of recalcitrant chlorinated solvent compounds via soil vapor extraction (SVE) and vapor treatment at a Site in Southern California. Phase I began with refrigerated condensation (C3) in order to achieve high mass removal rates to reduce lifecycle costs and time ...


    By GEO Inc

  • Landfill remediation with refrigerants and chlorinated solvents

    PROJECT DESCRIPTION Between 1979 and 1980, industrial and hazardous wastes were disposed of at the Site in a series of unlined pits, each of which was used for a particular type of waste disposal. It is reported based on evaluations of manifests that approximately 3.4 million gallons of hazardous liquid wastes and between 3,700 and 4,100 tons of solid wastes were disposed of in the pits ...


    By GEO Inc

  • Reduction in Solvents for Cleaning: Amcor Packaging (Australia)

    Background Amcor Cartons, a manufacturer of folding cartons and paperboard packaging is a 13 million dollar operation employing 60 staff. In keeping with Amcor Cartons’s commitment to respond to customer needs through the application of the highest technology, advantage was taken of the latest available technology when deciding to upgrade their printing press. After installing a new ...


  • Chlorinated solvent soil vapor extraction (SVE) remediation case study 2005

    Project Description An active industrial facility in South Central Los Angeles was impacted by tetrachloroethylene (PCE) and trichloroethylene (TCE; former staging area degreasing) operations as a part of its operations. A phased approach to soil vapor extraction (SVE) remediation was employed: the goal of Phase I was to attain high contaminant mass removal rates with very high VOC vapor ...


    By GEO Inc

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Thermally Enhanced NAPL Recovery - Case Study

    QED's AutoPump® Can Endure Tough Conditions to Deliver Superior Thermally Enhanced NAPL Recovery The site of a former U.S. Department of Energy (DOE) nuclear weapons production facility (the Pinellas Plant) in Largo, Florida posed an extreme challenge for groundwater remediation pumps. Soil and surficial aquifers at the site, now known as the Young-Rainey Science, Technology, and Research ...


    By QED Environmental Systems

  • Determination of PBDEs in Sediment Samples using Pressurized Solvent Extraction and Automated Soxhlet Extraction

    The efficiency of pressurized solvent extraction (PSE) was investigated by comparing PSE with automated Soxhlet extraction. Sediment samples containing polybrominated diphenylethers (PBDEs) were processed in the SpeedExtractor E-914 for PSE and the Extraction System B-811 for automated Soxhlet extraction. Quantification of PBDEs was performed by GC-MS. This study shows that both techniques are ...


    By BÜCHI Labortechnik AG

  • Improving performance of a gas stripping-based recovery system to remove butanol from Clostridium beijerinckii fermentation

    The effect of factors such as gas recycle rate, bubble size, presence of acetone, and ethanol in the solution/broth were investigated in order to remove butanol from model solution or fermentation broth (also called acetone butanol ethanol or ABE or solvents). Butanol (8 g L–1, model solution, Fig. 2) stripping rate was found to be proportional to the gas recycle rate. In the bubble size range ...


    By Springer

  • Recovery of water and acid from leach solutions using direct contact membrane distillation

    This paper describes for the first time the use of direct contact membrane distillation (DCMD) for acid and water recovery from a real leach solution generated by a hydrometallurgical plant. The leach solutions considered contained H2SO4 or HCl. In all tests the temperature of the feed solution was kept at 60 °C. The test work showed that fluxes were within the range of ...


    By IWA Publishing

  • Ivey-sol technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • CANSOLV® SULFUR DIOXIDE SCRUBBING SYSTEM

    The CANSOLV® System scrubbing technology is the leading regenerable SO2 scrubbing process. It uses an aqueous amine solvent in a conventional amine treater process flowsheet configuration to achieve high-efficiency removal of SO2 from a ...

  • Case study - Oxidizer system optimization

    OXIDIZER SERVICE SERIES: PART 4 As promised, this is the fourth installment of Anguil's Oxidizer Service Series. If you have read through the first three parts, this can be seen as a capstone of those efforts. Having a strong oxidizer service plan, backed up with recommended spare parts and all of the proper documentation will not only improve your system performance but also allow you to focus ...

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • How to Optimize Oxidation Systems for Efficient Operation

    Emphasis on air management within converting-process dryers and ovens is critical to the design of pollution-control systems for treating exhausts containing VOCs (volatile organic compounds). Efficient air management allows the pollution-control system to be optimally sized to meet the needs of the process. Good process control further defines the emission stream by avoiding the need for large ...


    By Babcock & Wilcox MEGTEC LLC

  • Detection of polychlorinated biphenyls (PCBs) in concrete using the ensys test system

    MATRIX: Concrete ANALYTES: Polychlorinated biphenyls (PCBs) RANGE OF DETECTION: Aroclor 1254: 0.5 ppm Aroclor 1260: 0.5 ppm Aroclor 1248: 1.0 ppm Aroclor 1242: 2.0 ppm Aroclor 1232: 4.0 ppm Aroclor 1016: 4.0 ppm MATERIALS: Ensys PCB in Soil Test Kit. Ensys PCB Sample Extraction Kit. Reagents: table salt ...


  • Does Your Facility Need a Reverse Osmosis or Nanofiltration System?

    Reverse osmosis (RO) and Nanofiltration (NF) are used across a wide variety of industrial applications for removal of dissolved materials from liquid streams. Implemented judiciously, RO and NF are effective strategies for recycling process liquids, reducing waste water, recovering and concentrating dissolved materials, and generating potable water. If your industrial facility requires removal of ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you