solvent recycling equipment manufacturer Articles

  • Recovery and Distillation of Used Wash Solvent: Wattyl Australia

    It took Wattyl Australia just one year to recoup a $100,000 investment in a distillation unit that recovers solvent used in cleaning tanks and equipment in plants manufacturing solvent-based paints. It is now enjoying the ongoing savings as an addition to its bottom line. Instead of paying someone to dispose of the valuable solvents, the company is recovering 90% of the solvent and using it to ...


  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Cement Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • China EPS foam recycling situation and technology progress

    China EPS foam recycling situation and technology progress In recent years, EPS (expanded polystyrene) foam recycling are attention by relevant departments, regulatory guidance and policy support were introduced. From the whole, made our EPS foam recycling was no small accomplishment. Following several EPS foam recycling technology to achieve the degree of ...


    By Harden Industries Ltd.

  • Energy from waste: the recycling of limed fleshings

    Leather products have been around a long while - there are those who claim that it is the second oldest business in the world. Going back a few millennia, when our earliest ancestors decided that sitting on hard rock was not a soft option, they turned to other materials in order to create more comfortable seating, as well as warmer bedding and improved clothing. Animal skins became the fabric ...


    By Flottweg SE

  • Chemical Use Reduction, Recycling for Packaging, Waste Reduction and Energy Use Reduction: Robert Bosch Australia

     Background Robert Bosch Australia was established in 1954 in Clayton, Victoria. The main manufacturing plant remains there to this day. The company has some 1,150 employees in Australia. Robert Bosch manufactures and distributes a wide variety of products from electronic consumer goods, to industrial hydraulics, to hot water systems. The focus of activity in Australia is ...


  • Coil Coating Case History

    The Customer The Company manufactures metal roofing and gutter systems for the commercial and residential housing industry. The Process Bare coils of recycled steel and aluminum are uncoiled from a roll. The metal is chemically cleaned, treated and rinsed to prepare the surface for optimum coating adhesion and corrosion protection. The coil then enters a ...

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Mono muncher improves process efficiency

    A major cement company in the UK, Rugby Cement produces in the region of 2.6m tonnes of cement per year (0.5mtonnes using the wet kiln process) which is used primarily by the construction industry. To minimise fuel expenditure, Rugby Cement uses recycled solvent waste, commonly referred to as secondary liquidfuel, a by-product from the paint and printing industries. The fuel is delivered by road ...

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • Volvo Trucks North America achieves goals for major reductions of air emissions and water use

    Volvo Trucks - North America maintains a strong commitment to its core value of environmental care, as well as responsible corporate citizenship by limiting its environmental impact on the community surrounding its Dublin, Virginia facility. In 2003 and 2004, Volvo continued that tradition of corporate responsibility by launching several ambitious initiatives that significantly reduced air and ...


    By IHS

  • Biofilter Applications in the Coatings Industry.

    Soaring energy costs and the high cost of ‘end-of-pipe’ pollution control equipment has caused companies and regulatory agencies to re-evaluate ‘unconventional’ means of achieving VOC and HAP emissions control. The coatings industry is an excellent candidate for alternative, unconventional controls, as VOC and HAP reductions have not been as strident as has been the case in many other industries. ...


  • Crossflow Membrane Applications for Glycol-based aqueous solutions

    Introduction This document is a guide for water treatment engineers to better understand crossflow membrane applications for glycol-based aqueous solutions. It includes glycol applications we have sold equipment for, applications we have successfully tested, and applications we have not tested but are expected to be technically feasible. Glycol-based solutions are commonly used by a ...


  • Principles of Waste Avoidance and Utilization

    The minimization of wastes requiring disposal is increasingly important as available disposal options become more and more constrained, and particularly as more substances enter everyday use which are not readily decomposed in the natural environment and which can present long term hazards. This note sets out some basic principles for waste minimization in industrial processes, where ...


    By The World Bank

  • Petroleum Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Companies and people leading the restructured environmental services industry in Canada

    The landscape of environmental service providers in Canada has changed dramatically in the past four or five years, especially with mergers and acquisitions announced in recent months between some fast-growing businesses. Only a decade ago the industry was dominated by a couple of publicly-traded continental companies that gobbled up numerous small and medium-size enterprises to offer customers a ...

  • P2 for SMEs: How to advance pollution prevention in small and medium-sized organizations

    Businesses in the small- and medium-sized enterprise sector are a vital part of the Canadian economy. So-called 'SME' firms have less than 500 employees and less than $50-million in annual revenues. But SMEs are the fastest growing facet of the Canadian economy, and as such are especially important to the successful adoption of pollution prevention (referred to as 'P2' in government circles). SME ...

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you