sorbent trap Articles

  • Evaluation of Sorbent Methodology for Petroleum-Impacted Site Investigations

    Abstract Soil gas measurements are often used for risk assessment in vapor intrusion investigations. In the case of petroleum-contaminated sites, total petroleum hydrocarbon (TPH) characterization may be required to effectively measure the associated risk. One of the common strategies employed to characterize TPH for risk assessment includes the quantitation of indicator compounds of ...


    By Eurofins Air Toxics Inc

  • Nano-structured calcium silicate as sorbent in a study of artificial mining waste

    Nano-structured calcium silicate can adsorb a wide variety of ionic species. The mechanism of the uptake observed depends on the nature of the species and is selective towards the more insoluble hydroxides for cationic and insoluble calcium compounds for anionic sources. Additionally, waterborne solids can become trapped, with the silicate, acting as a filter. Artificial mining waste samples have ...


    By Inderscience Publishers

  • Experimental study of the mechanisms of steam reactivation of unreacted calcium-based sorbent for Flue Gas Desulphurisation

    This paper reports an experimental investigation of the mechanisms of steam reactivation of spent sorbent for flue gas desulphurisation. Sulphated lime samples were reactivated by using steam to increase the conversion rate of sorbent for flue gas desulphurisation. Samples were characterised using mercury porosimeter, XRD, and SEM. Reactivation temperatures were in the range of 200-800°C. ...


    By Inderscience Publishers

  • U.S. EPA volatile organics method 524.2 using PURGE and TRAP GC/MS

    Clean drinking water is of worldwide interest. Contaminants can compromise the quality of a water supply and cause short- and long-term health effects. Stringent water quality criteria help to ensure safe drinking water by requiring the detection and quantification of a wide variety of contaminants at extremely low levels. U.S. EPA Method 524.2 (1) provides the guidance necessary for identifying ...


    By PerkinElmer, Inc.

  • Sampling of Carbonyls Using a Dual-Layer LpDNPH Glass Sampling Tube and HPLC Analysis

    The dual-layer LpDNPH sorbent tube is an air sampling device designed for sampling carbonyls (e.g. formaldehyde) in ambient, indoor, and industrial atmospheres. Carbonyls are trapped on our high-purity silica gel adsorbent coated with 2,4-dinitrophenylhydrazine (2,4-DNPH) where they are converted to stable hydrazone derivatives. The derivatives are eluted from the tube in acetonitrile and ...


    By Sigma-Aldrich Co., LLC

  • Mercury Control Demonstrations

    C1.1 | Halogens and Sulfur in Coals and their Influence on Co-benefit Mercury Capture Bernhard Vosteen | President, Vosteen Consulting Gmbh Not only the range of the coal mercury content itself, but also the range of the native halogen and sulfur contents in coal are of great influence on co-benefit mercury capture, wet and dry. The ...

  • Difficult Complex Decisions For Coal-fired Power Plant Operators

    Changing fuel prices, government regulations and technology all combine to make decision making difficult for operators and developers of coal-fired power generation facilities around the world. Power plant designers in developing countries face new local environmental regulations plus additional requirements stipulated by lenders such as the World Bank. In the developed world, the regulations ...


    By The McIlvaine Company

  • Method 301 Evaluation of Candidate conditional methods case study

    A new metal emissions measurement and validation system has recently been developed that has the potential to significantly improve our understanding of metal emissions from a wide range of source categories. This system consists of: A continuous emission monitoring system (Xact-CEMS) An instrumental analyzer procedure (Xact-IAP) A sampling and analysis measurement method ...


    By Cooper Environmental

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Comprehensive analysis of tobacco smoke using TD–GC×GC–TOF MS with Tandem Ionisation

    The hazardous constituents of cigarette smoke have attracted considerable attention lately, especially with increasing regulation around the world limiting or banning smoking in public places – and even in private cars if children are present. From an analytical perspective, however, there is much that remains to be learnt about the composition of cigarette smoke, because of its high degree ...


    By SepSolve Analytical

  • How Can TO-15 Help You Solve Your Next IAQ Problem?

    Untitled Document Have you ever been asked to investigate unpleasant odors in a home or at the workplace? Are occupants developing headaches or a feeling of nausea? ...


    By EMSL Analytical, Inc.

  • FTIR gas analyzers support management of fire at UK waste facility

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents.  Arrangements have been made in England to bring together experts from the Environment ...


    By Gasmet Technologies Oy

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Cementing the PC MACT

    On September 9, 2010, the U.S. EPA promulgated the final amendments to the National Emissions Standard for Hazardous Air Pollutants from Portland Cement Manufacturing Industry (40 CFR 63 Subpart LLL), also known as the PC MACT. EPA’s self-proclaimed “historic” rulemaking includes some important implications for cement manufacturers and other sources that may be subject to ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you