stack air monitoring Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Flare Stack Monitoring Minimizes Environmental Impact

    EPA Flare Regulations Ensure Safe Flare Stack Operations CAS DataLoggers recently provided the flare stack monitoring solution to a processor of industrial railcars who dispose of the reclaimed chemicals and hydrocarbon liquids using a flare stack. A flare stack is the last line of defense for ensuring that toxic hydrocarbons are neutralized ...


    By CAS DataLoggers

  • Selection of Particulate Monitors

    The installation and operation of continuous particulate emission monitors in industrial processes has become well developed and common practice in industrial stacks and ducts over the past 30 years reflecting regulatory monitoring requirements. It supports requirements originating from LAPPC (Local Air Pollution Prevention and Control), IPPC (Integrated Pollution Prevention and Control), WID ...


    By ENVEA

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Canarina DISPER software · air pollution mapping · algorithms 9

      Canarina DISPER software · air pollution mapping   9.1.4 Plume Rise Formulas  The plume height is used in the calculation of the Vertical Term. The distance dependent momentum plume rise equations are used to ...

  • Air pollution control using laser analysis – Case Study

    An LDS 6 analyzer monitors HF emissions during the production of hydrofluoric acid in accordance with the German Technical Instructions on Air Quality Control (TA Luft) The customer Fine chemicals and inorganic basic chemicals have been developed and produced at the Seelze chemical site in northern Germany for more than 100 years. Such a basic chemical is ...

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Why use purge air? And what practicalities to consider.

    Many AMETEK Land instruments use purge air, in the post I am going to explain the purpose and some of the practicalities surrounding this technology. In general, purge air is used on optical instruments such as emissions monitors and ...


    By AMETEK Land

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Air emissions impact measurements at a perchloroethene remediation site

    As part of an U.S. EPA time critical removal action, an air monitoring system was established to measure real-time impacts of perchloroethene (PCE) on the surrounding areas. The soils and groundwater beneath the site (located in West Fargo, North Dakota) were treated using in situ heating of soil and groundwater, with the produced vapors collected using conventional vapor extraction. In order ...


    By VOC Technologies

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • New NO2 air standards prove technically challenging

    On February 9, 2010, the U. S. Environmental Protection Agency (EPA) established a new National Ambient Air Quality Standard (NAAQS) for nitrogen dioxide (NO2). The new NO2 NAAQS is a one-hour standard set at 100 parts per billion (ppb), which is approximately 188 micrograms per cubic meter (μg/m3). Effective on April 12, 2010, the new one-hour standard is intended to protect against peak ...


    By Trinity Consultants

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...

  • NEO Monitors conquers the Quasi-impossible

    China is a world factory powered by its abundant coal resource. China is facing a huge environmental challenge brought together with the fossil-fired power plants. China has therefore been conducting technical retrofit to the engines of its economy, by introducing emission control facilities. Selective Catalytic Reduction (SCR) technology is one of the most widely applied emission control ...


    By NEO Monitors AS

  • Canarina DISPER Software · indoor air quality dispersion · algorithms 8

      Canarina DISPER Software · indoor air quality dispersion   9.1.3 Wind Speed Profile  The wind power law is used to adjust the observed wind speed, uref, from a reference measurement height, ...

  • Modelling the air quality impact of industrial emissions over a valley in Southern Italy

    The aim of this study is to support decision makers and stakeholders in the management of air quality in an industrial area located in a valley in southern Italy, where neither air quality nor meteorological parameters are routinely monitored. The first phase focused on the inventory of emissions through monitored data at stacks, permissions to emit from local authorities, and life cycle ...


    By Inderscience Publishers

  • Choosing flow monitors for CEMS applications

    As a result of the 1990 Clean Air Act Amendments1, electric power plants must reduce their emissions of sulfur dioxide and nitrous oxides—the primary causes of acid rain. The U.S. Environmental Protection Agency (EPA), in its proposed rules2, designates the 111 Phase I fossil-fueled plants ^roughly 268 boiler units) that must have continuous emissions monitoring systems (CEMS) installed, ...


    By Sierra Instruments, Inc.

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you