stack analyser Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • New White Paper on FTIR multigas analysis

    Quantitech has announced the publication of a free White Paper on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR (Fourier Transform InfraRed) technology. With the ability to measure almost any gas, FTIR monitoring technology is employed in an enormous variety of applications including Continuous Emissions Monitoring, Stack Testing, Process Control, ...


    By Quantitech Ltd

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • Popular analysers are portable and rentable

    The MCERTS approved HORIBA PG-250 has been one of the most popular  instruments in Ashtead Technology’s fleet of rental equipment for a number of  years. Jay Neermul, the company’s Environmental Product Manager says “This  is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard  reference methods in a portable instrument that can be easily and ...


    By Ashtead Technology Ltd

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Entropy-energy analysis of porous stack: steady state conjugate problem

    We have performed analytical and limited numerical analyses for fully developed forced convection and entropy generation in a fluid-saturated porous medium channel bounded by two parallel plates of finite thickness. The full problem is treated as a conjugate heat transfer problem. The Darcy-Brinkman momentum equation is used to model the flow through the porous media. The outer surfaces of the ...


    By Inderscience Publishers

  • Engineers Benefit from Geotube Stacking Technology & Analysis - Case Study

    Stacking Geobag units makes projects previously thought impossible, possible. Since 1962, Geotube  technology has protected countless shorelines and provided low cost, high volume dewatering solutions to companies all over the world. Starting off as a single layer unit designed for shoreline erosion protection, Geotube structures have been developed and improved for more than 40 ...

  • How does climate stack up against other worst-case scenarios?

    Climate isn’t the only catastrophe threatening the planet, but it may be the one most in need of attention and resources. The following is excerpted from Climate Shock (2015) by Gernot Wagner and Martin L. Weitzman. Published here with permission from Princeton ...


    By Ensia

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Grana-Localized Proteins, RIQ1 and RIQ2, Affect the Organization of Light-Harvesting Complex II and Grana Stacking in Arabidopsis

    Abstract Grana are stacked thylakoid membrane structures in land plants that contain photosystem II (PSII) and light-harvesting complex II proteins (LHCIIs). We isolated two Arabidopsis mutants, reduced induction of non-photochemical quenching (riq1 and riq2), in which stacking of grana was enhanced. The curvature thylakoid 1a curt1a) mutant was previously shown to lack grana structure. ...


    By H Smith Plastics LTD

  • Dispersion modeling— New downwash calculations change the playing field

    For many people, the terms “stack height” and “dispersion model” do not ring a bell. Others grapple with these terms as they can be challenging factors in the process of obtaining an air construction permit. Have you ever constructed a stack at a specific height due to EPA guidelines and regulations surrounding Good Engineering Practice (GEP) as it relates to air ...


    By Trinity Consultants

  • Exergy and energy analysis of an AC steel electric arc furnace under actual conditions

    The energy and exergy analyses of an existing steel Electric Arc Furnace (EAF) are performed to estimate the potential for increasing the furnace efficiency. To obtain realistic results, the effect of air infiltration into the furnace was taken into account. The results of the analyses revealed that the energy and exergy efficiencies of the furnace are low and should be increased. The main ...


    By Inderscience Publishers

  • Landfill gas analysis telematics in Slovenia case study

    Application Landfill - waste to energy Equipment AEMS Location Novo Mesto, Slovenia Customer AFS client, Minerva Žalec d.d Requirement The customer specified a 6-channel landfill gas analyser with secure online internet access for data transmission. ...


    By Geotech

  • Analysis of conduction mechanism in silicon nitride–based RRAM

    The conduction mechanism in Ti/Si3N4/p–Si memory stack is described. In order to analyse the conduction mechanism, we have measured the I–V characteristics in voltage sweep mode and performed I–V curve fitting. The temperature dependence in Ti/Si3N4/p–Si ...


    By Inderscience Publishers

  • Complementary multi-gate tunnelling FETs: fabrication, optimisation and application aspects

    In this paper fabrication, optimisation and application aspects of complementary Multiple-Gate Tunnelling FETs (MuGTFETs) are presented. Tunnelling FETs (TFETs) are realised in a state-of-the-art low-power multi-gate CMOS technology. n- and p-type tunnelling currents are observed within a single device structure. Digital and analogue device performance is analysed. Measured devices show ...


    By Inderscience Publishers

  • Enhancing the efficiency of crude oil transportation pipeline: a novel approach

    In this paper, exergy and economic analyses are carried out on a 30″ crude oil transportation pipeline and related pump stations. The exergy destructions and losses of the components and the entire system were determined in the operation, resulting in the identification of the gas turbines stacks as the major elements of exergy losses. A proposal has been made for improving the energy and exergy ...


    By Inderscience Publishers

  • Exergoeconomic based multi–objective optimisation of a solid oxide fuel cell system

    In this study, the multi–objective optimisation of a solid oxide fuel cell (SOFC) system by defining the objective functions to maximise the power output, energy efficiency and exergy efficiency, and minimise the cost under various constraints is conducted. In this regard, energy, exergy and exergoeconomic analyses are performed. Some specific cases are considered and studied parametrically by ...


    By Inderscience Publishers

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Canarina DISPER software · air pollution mapping · algorithms 9

      Canarina DISPER software · air pollution mapping   9.1.4 Plume Rise Formulas  The plume height is used in the calculation of the Vertical Term. The distance dependent momentum plume rise equations are used to ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you