Stack Analyzer Articles on Environmental XPRT

Stack gas VOC monitoring

POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

Dec. 23, 2013

By Pollution Srl

Assist Gas Measurement in Flare Stacks

The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, ...

Oct. 5, 2013

By Control Instruments Corporation

AMETEK PI wins stack gas/emissions analyzer category bronze medal award in control magazine reader choice awards

Every single interaction between customer and supplier is an oppor-tunity for providing good solutions. After awhile, these positive mo-ments really begin to add up. Despite the huge effort and extreme consistency required, the best vendors almost re¬ exively deliver useful products and services, and con-tinually develop and release new improvements and innovations. Con-sequently, over ...

Feb. 4, 2015

By Ametek Process Instruments - THERMOX

Analyzing Stack Gas Semivolatiles, Using Supelpak-2 Adsorbents and Capillary GC (Modified Method 5, US EPA SW-846)

The demanding detection limits required for air sampling by Modified Method 5 (US EPA SW-846, Method 0010) necessitates extensive cleaning and meticulous handling of the adsorbent cartridge/trap during sampling and analysis. Supelpak-2 adsorbent is cleaned in accordance with and meets the purity criteria of EPA SW-846, Method 0010, for testing semivolatile emissions from incinerator stationary ...

Dec. 31, 1997

By MilliporeSigma

White Paper: ANSI N13.1-2011 Stack Sampling Considerations

Background Nuclear facilities are required to follow industry standards for sampling stack effluents. Exposure of the general public to released radionuclides must be monitored as specified in US governmental regulations. The United States Environmental Protection Agency (USEPA) and the United States Nuclear Regulatory Commission (USNRC) have the authority over the monitoring of these ...

Sep. 20, 2014

By HI-Q Environmental Products Company

How does climate stack up against other worst-case scenarios?

Climate isn’t the only catastrophe threatening the planet, but it may be the one most in need of attention and resources. The following is excerpted from Climate Shock (2015) by Gernot Wagner and Martin L. Weitzman. Published here with permission from Princeton ...

Apr. 1, 2015

By Ensia

Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...

Jul. 8, 2014

By Pollution Srl

Grana-Localized Proteins, RIQ1 and RIQ2, Affect the Organization of Light-Harvesting Complex II and Grana Stacking in Arabidopsis

Abstract Grana are stacked thylakoid membrane structures in land plants that contain photosystem II (PSII) and light-harvesting complex II proteins (LHCIIs). We isolated two Arabidopsis mutants, reduced induction of non-photochemical quenching (riq1 and riq2), in which stacking of grana was enhanced. The curvature thylakoid 1a curt1a) mutant was previously shown to lack grana structure. ...

Sep. 6, 2016

By H Smith Plastics LTD

FTIR resolution requirements for industrial gas analyzers

FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...

May 1, 2008

By CIC Photonics, Inc.

FTIR resolution requirements for industrial gas analyzers

FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...

Aug. 9, 2011

By CIC Photonics, Inc.

Air Dispersion Models - Models can be used to aid in demonstrating environmental compliance, analyzing process changes and evaluating the impacts of accidental releases

Air dispersion models are used to estimate the downwind concentration of pollutants emitted by various pollution sources such as industrial facilities and regional public traffic. Dispersion models play an important role in the industrial and regulatory communities. They are typically used to demonstrate compliance with National Ambient Air Quality Standards as part of new source review, ...

Jan. 1, 2001

By Trinity Consultants

Heating value

The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

Oct. 28, 2009

By Control Instruments Corporation

Natural radionuclides in waste water discharged from coal-fired power plants in Serbia

Investigation of the natural radioactivity levels in water around power plants, as well as in plants, coal, ash, slag and soil, and to assess the associated radiation hazard is becoming an emerging and interesting topic. This paper is focused on the results of the radioactivity analysis in waste water samples from five coal-fired power plants in Serbia (Nikola Tesla A, Nikola Tesla B, ...

Sep. 19, 2016

By IWA Publishing

Treatment of cyanide wastewater by bulk liquid membrane using tricaprylamine as a carrier

The transport of cyanide from wastewater through a bulk liquid membrane (BLM) containing tricaprylamine (TOA) as a carrier was studied. The effect of cyanide concentration in the feed solution, TOA concentration in the organic phase, the stirring speed, NaOH concentration in the stripping solution and temperature on cyanide transport was determined through BLM. Mass transfer of cyanide through ...

Mar. 15, 2016

By IWA Publishing

DL3000’s Direct Link Between Remote Data Acquisition and Web-Based Data Analysis and Control

Stevens’ DataLogic 3000 (DL3000) is available with a built-in TCP/IP stack to easily interface to a standard Internet connection directly via Ethernet or cell modem. Once connected, the data can be processed and analyzed on-line using the Stevens-Connect data management service or user customized data management program. Such information can be incorporated with other web services for enhanced, ...

Feb. 2, 2010

By Stevens Water Monitoring Systems, Inc.

Natural Gas Processing Case Study

The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

Oct. 5, 2013

By Control Instruments Corporation

Save Time, Money, and the Environment with TenCate’s Geotube Dewatering and Shoreline Protection Products - Case Study

Innovative Solutions in Dewatering and Shoreline Protection Projects SetTenCate Apart from Competition. As the world's leading provider of woven and non-woven geosynthetics and industrial fabrics, TenCate's" Geotubetechnology has been used to deliver high performance solutions around the globe in more than 50 countries. From proprietary software programs that assist with design and ...

Jan. 1, 2008

By TenCate Geosynthetics Netherlands bv

Canarina DISPER software · air pollution mapping · algorithms 9

Canarina DISPER software · air pollution mapping 9.1.4 Plume Rise Formulas The plume height is used in the calculation of the Vertical Term. The distance dependent momentum plume rise equations are used to ...

Nov. 14, 2011

By Canarina Environmental Software

Hurricane for PM Emission Reduction from Dryer off Gases on a Wood Pellet Production Line 8074 m3/h @ 110 ◦C - Case Study

FOREWORD Advanced Cyclone Systems, S. A. (ACS) designed a settling chamber, followed by a Hurricane system with the double purpose of dust recovery and Particulate Matter (PM) emission reduction, from a sawdust rotary dryer in an industrial wood pellets production plant with 2 ton/h capacity (VIMASOL). High quality pellets are manufactured from sawdust coming from nearby ...

Jan. 1, 2013

By Advanced Cyclone Systems, S. A.

Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

Nov. 24, 2014

By Ametek Process Instruments - THERMOX

Subscribe to our eBulletins

Add Supplier Profile