stack continuous emission monitor Articles

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • Technical Challenges of Continuous Mercury Emissions Monitoring

    Many pollutants such as CO2, NOx and SO2 have been monitored continuously already for decades. In the last years the awareness for the need to measure mercury has also grown, and continuous mercury monitoring is becoming more and more relevant. Especially industries burning coal, oil or waste, share the responsibility to monitor their mercury emissions. All measuring techniques need to be able to ...


    By Gasmet Technologies Oy

  • Who Needs Continuous Emissions Monitoring?

    Continuous emissions monitoring (CEM) is about monitoring air pollutants generated by a specific activity and emitted to the ambient air, typically through a tall stack or other exhaust pipe. The “activity” can be some industrial process like a power plant or a waste incinerator, but it can also be on a much smaller scale such as a car equipped with an internal-combustion engine. ...


    By Opsis AB

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Flare Stack Monitoring Minimizes Environmental Impact

    EPA Flare Regulations Ensure Safe Flare Stack Operations CAS DataLoggers recently provided the flare stack monitoring solution to a processor of industrial railcars who dispose of the reclaimed chemicals and hydrocarbon liquids using a flare stack. A flare stack is the last line of defense for ensuring that toxic hydrocarbons are neutralized ...


    By CAS DataLoggers

  • CEMS II e Increases Flexibility in Continuous Emissions Monitoring

    Gasmet’s vision is to live on a planet with less emissions. To fulfill this mission, we manufacture reliable and complete continuous emissions monitoring systems. We specialize in two different kinds of monitoring systems: 1) ...


    By Gasmet Technologies Oy

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

  • Continuous emission monitoring and control of packed tower odor control systems using the sycamore CEM

    ABSTRACT Packed-tower chemical scrubbers, with sodium hydroxide (caustic) and sodium hypochlorite (bleach), are commonly used to treat foul air from wastewater treatment processes. The available control mechanisms include a pH probe and controller for the sodium hydroxide feed, an oxidation reduction potential (ORP) probe with a controller toestablish the bleach feed, and proprietary ...

  • The Flexibility & Versatility of a Portable Emissions Analyzer

    Issue Fixed CEMS (Continuous Emissions Monitors) Measure at One Location CEMS are fixed units that typically only measure from one sample location which is usually on a main centralized stack. This main stack is often fed by several separate emissions sources throughout the plant such as boilers, heaters, engines, ovens, and furnaces. If the CEM ...

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By SIGRIST - PHOTOMETER AG

  • Selection of Particulate Monitors

    The installation and operation of continuous particulate emission monitors in industrial processes has become well developed and common practice in industrial stacks and ducts over the past 30 years reflecting regulatory monitoring requirements. It supports requirements originating from LAPPC (Local Air Pollution Prevention and Control), IPPC (Integrated Pollution Prevention and Control), WID ...


    By ENVEA

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • HF Emission from Dubal`s Electrolysis Cell

    Abstract The overall goal for this paper is to gain better understanding of the environmental aspect of the aluminium smelting cell. It encompasses a study of the relative contributions of operational practices, duct flow, alumina feeding and ambient conditions to the overall HF generation and the different categories of emission distribution between the recycle system, the pot room roof and the ...


    By Boreal Laser Inc.

  • Choosing flow monitors for CEMS applications

    As a result of the 1990 Clean Air Act Amendments1, electric power plants must reduce their emissions of sulfur dioxide and nitrous oxides—the primary causes of acid rain. The U.S. Environmental Protection Agency (EPA), in its proposed rules2, designates the 111 Phase I fossil-fueled plants ^roughly 268 boiler units) that must have continuous emissions monitoring systems (CEMS) installed, ...


    By Sierra Instruments, Inc.

  • Development and Implementation of an Alternative Emissions Monitoring Program for Carbon Monoxide Compliance for Fluidized Catalytic Cracking Unit CO Boilers

    This paper presents the results of an alternative emissions monitoring test program for the Fluidized Catalytic Cracking Unit (FCCU) CO boilers at major oil refinery. Alternative emissions monitoring systems can be used in lieu of other compliance monitoring techniques (e.g., periodic emissions testing, continuous emissions monitoring) to relate monitored operating conditions which might indicate ...

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you