stack emissions Articles

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • A Critical Evaluation of the South African Air Quality Offsets Guideline

    There is wide recognition in South Africa to the link between the quality of life and quality of the air we breathe. The Department of Environmental Affairs (DEA) attempts to improve air quality through two key regulatory tools; emission limits, which regulate the maximum concentration of certain pollutants permissible within certain, ‘listed’ industrial stacks or vents, and ambient ...


    By WKC Group

  • Controlling Stack Emissions in the Wood Products Industry & Wood Fired Boilers

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Analysis of Stack Emissions Using VOST Air Sampling Tubes and Capillary GC

    United States EPA SW-846, Method 0030, Volatile Organic Sampling Train (VOST), describes the sampling of emissions for volatile compounds from hazardous waste incinerator stacks. Supelco's VOST air sampling tubes are designed to fulfill the method requirements and provide low background levels.               ...


    By Sigma-Aldrich Co., LLC

  • How Do PEMS Stack Up?

    Chemical Engineering Magazine journalist, Amer Khaqan investigates the installation of a relatively unknown method of emissions monitoring, PEMS (Predictive Emissions Monitoring System) at the methanol production facility of Arrazi in Saudi Arabia. The article shines light on the advancing technology of PEMS and explains the advantages of installing one, over the commonly used CEMS (Continuous ...


  • AMETEK PI wins stack gas/emissions analyzer category bronze medal award in control magazine reader choice awards

    Every single interaction between customer and supplier is an oppor-tunity for providing good solutions. After awhile, these positive mo-ments really begin to add up. Despite the huge effort and extreme consistency required, the best vendors almost re¬ exively deliver useful products and services, and con-tinually develop and release new improvements and innovations. Con-sequently, over ...

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Modeling emissions from offshore drilling

    To regulate drilling activities proposed by oil and gas companies in the oil-rich Gulf of Mexico (GOM), governing agencies require the submittal and approval of certain plan documents before drilling activities can be initiated. For drilling activities in the Western GOM, these plans typically consist of one of the following: EP, or Exploration Plan – required to conduct ...


    By Trinity Consultants

  • A cure for Environmental Emissions case study

    Disposing of nearly 1 million pounds of medical waste a month is no easy task. The wet electrostatic precipitator, installed at Rochester, MN-based Mayo Clinic, seems to be just what the doctor ordered. While the medical waste incinerator at Mayo Clinic in Rochester, MN, consistently met state and federal emission requirements, facility leadership recognized that installing a wet electrostatic ...


    By Bionomic Industries Inc.

  • An analysis of extinction coefficients of particles and water moisture in the stack after flue gas desulfurization at a coal-fired power plant

    Two important factors that affect in-stack opacity—light extinction by emitted particles and that by water moisture after a flue gas desulfurization (FGD) unit—are investigated. The mass light extinction coefficients for particles and water moisture, kp and kw, respectively, were determined using the Lambert-Beer law of opacity with a nonlinear least-squares regression method. The ...

  • Summarizing the fundamentals of fugitive emission tracking

    Fugitive emission tracking for a number of key industries is now a focus for the United States and a number of other countries. When a hazardous leak occurs it is important to identify and gauge the amount and type of substance emitted. Officials will gain a better understanding of the challenge posed by greenhouse gases, as they affect global warming. When an unexpected leak of a hazardous ...


    By Verisae

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you