stack gas Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • AMETEK PI wins stack gas/emissions analyzer category bronze medal award in control magazine reader choice awards

    Every single interaction between customer and supplier is an oppor-tunity for providing good solutions. After awhile, these positive mo-ments really begin to add up. Despite the huge effort and extreme consistency required, the best vendors almost re¬ exively deliver useful products and services, and con-tinually develop and release new improvements and innovations. Con-sequently, over ...

  • Improving steam power plant efficiency through exergy analysis: effects of altering excess combustion air and stack-gas temperature

    Modifications are examined to increase coal-fired steam power plant efficiency by reducing irreversibilities in the steam generator, including decreasing the fraction of excess combustion air, and/or the stack-gas temperature. Overall-plant energy and exergy efficiencies both increase by 1.4% when the fraction of excess combustion air decreases from 0.4 to 0.15, and by 3.5% when the stack-gas ...


    By Inderscience Publishers

  • Analyzing Stack Gas Semivolatiles, Using Supelpak-2 Adsorbents and Capillary GC (Modified Method 5, US EPA SW-846)

    The demanding detection limits required for air sampling by Modified Method 5 (US EPA SW-846, Method 0010) necessitates extensive cleaning and meticulous handling of the adsorbent cartridge/trap during sampling and analysis. Supelpak-2 adsorbent is cleaned in accordance with and meets the purity criteria of EPA SW-846, Method 0010, for testing semivolatile emissions from incinerator stationary ...


    By MilliporeSigma

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • Finding the needle in the hay stack - tracing seabed gas seepages using hullborne multibeam echo sounder, and AUV based sonar and optical systems case study

    Scientific objective A better understanding of the shallow geological systems in the Barents Sea with particular attention to fluid flow Specific objectives Identify regional spatial distribution of gas flares within an area of 3000 km2 in the Barents Sea Identify and describe associated structures (i.e. pockmarks, carbonate reefs) using ...


    By Franatech GmbH

  • Controlling Stack Emissions in the Wood Products Industry & Wood Fired Boilers

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...

  • Fugitive Gas Emissions In The Petroleum & Natural Gas Industry

    Challenge: Fugitive emissions in the petroleum and natural gas industry can come from a variety of sources and are classified as intentional (venting from tanks, compressor vents and stacks) or unintentional (equipment wear and tear, improper assembly, damage or manufacturing defects).  Most of these fugitive gas leaks are considered insignificant or  too small to ...


    By Leak Imaging, LLC

  • Award Winning Large Diameter FRP Stacks For Magnesium Extraction Plant

    When Fabricated Plastics Limited of Maple (Toronto), Ontario, Canada was awarded a contract by a world renowned Mining/Metallurgical Company, it proved to be a chance to exhibit their engineering excellence in several ways. First they had to demonstrate that their proposed use of Fibreglass Reinforced Plastic (FRP) was clearly the material of choice in competition with other materials. Then they ...


    By Fabricated Plastics Limited

  • Fort Stewart uses custom stainless steel stacks for M-1 tanks

    Monoxivent provided six custom exhaust stacks made of 11-gauge 304 stainless steel for Fort Stewart (GA). The 24" diameter stacks are used to remove harmful exhaust fumes from the facility.  Special adapters were fabricated to attach to M-1 Tanks.  1000 Series Stainless Steel flex hose tied the tank adapters to special wall receptors attached to the vertical ...


    By Monoxivent

  • Tips for Refinery Gas Analysis

    Refinery gas analysis (RGA) is an important application in oil and gas which characterizes the gases produced during crude oil refining, including stack emission, flame and reformate streams. The challenge in RGA analysis is the reliable analysis of variable sources and compositions of gases produced via fluid catalytic cracking (FCC). The analysis must be quick and accurate to allow engineers to ...

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

  • Theory, Modeling, and Measurements of Gas Plumes

    Abstract Spectroscopic measurements of infrared CO2 transitions in gas plumes are reported, and evaluated for their potential to yield a reliable remote sensing technique for determination of plume temperature. Measurements were made on two types of plumes: a sideways-directed plume from a vehicle exhaust, and a stack plume from a propane-burning portable plume generator. Modeling of CO2 ...


    By D&P Instruments, Inc

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics

  • Development of Low noise landfill gas flare

    Summary: Increasing requirements of the environmental standards and planning permission conditions create more challenges to the equipment providers. Environment Agency guidance demands low emission levels and local planners put low noise levels in their conditions for landfill sites. Achieving both at the same time with conventional equipment was found problematic. Biogas Technology has ...


    By Biogas Technology Limited

  • What is the Purpose of a Gas Diffusion Layer (GDL)?

    The Gas Diffusion Layer (GDL) plays several critical roles in a typical fuel cell application and is often integrated as part of the Membrane Electrode Assembly (MEA). Typical applications that use GDLs consist of Polymer Electrolyte  ...


    By Fuel Cells Etc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you