stack gas analyzer Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Assist Gas Measurement in Flare Stacks

    The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, ...

  • New White Paper on FTIR multigas analysis

    Quantitech has announced the publication of a free White Paper on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR (Fourier Transform InfraRed) technology. With the ability to measure almost any gas, FTIR monitoring technology is employed in an enormous variety of applications including Continuous Emissions Monitoring, Stack Testing, Process Control, ...


    By Quantitech Ltd

  • AMETEK PI wins stack gas/emissions analyzer category bronze medal award in control magazine reader choice awards

    Every single interaction between customer and supplier is an oppor-tunity for providing good solutions. After awhile, these positive mo-ments really begin to add up. Despite the huge effort and extreme consistency required, the best vendors almost re¬ exively deliver useful products and services, and con-tinually develop and release new improvements and innovations. Con-sequently, over ...

  • Analyzing Stack Gas Semivolatiles, Using Supelpak-2 Adsorbents and Capillary GC (Modified Method 5, US EPA SW-846)

    The demanding detection limits required for air sampling by Modified Method 5 (US EPA SW-846, Method 0010) necessitates extensive cleaning and meticulous handling of the adsorbent cartridge/trap during sampling and analysis. Supelpak-2 adsorbent is cleaned in accordance with and meets the purity criteria of EPA SW-846, Method 0010, for testing semivolatile emissions from incinerator stationary ...


    By Sigma-Aldrich Co., LLC

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Air Dispersion Models - Models can be used to aid in demonstrating environmental compliance, analyzing process changes and evaluating the impacts of accidental releases

    Air dispersion models are used to estimate the downwind concentration of pollutants emitted by various pollution sources such as industrial facilities and regional public traffic. Dispersion models play an important role in the industrial and regulatory communities. They are typically used to demonstrate compliance with National Ambient Air Quality Standards as part of new source review, ...


    By Trinity Consultants

  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

  • Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

    During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

  • Canarina DISPER software · air pollution mapping · algorithms 9

      Canarina DISPER software · air pollution mapping   9.1.4 Plume Rise Formulas  The plume height is used in the calculation of the Vertical Term. The distance dependent momentum plume rise equations are used to ...

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Case study - Spindle utilities module

    Business Situation The existing method of tracking utility usage at these industrial laundries was highly manual, unreliable, and time consuming. Total utility consumption from bills was entered into large spreadsheets and analyzed over periods that were often 3 months or more in arrears. The report merely told managers what they already knew—they had overspent on natural gas; ...


    By Dober Chemical Corp

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you