stack monitor Articles

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Stacking up: flare Monitoring from LumaSense

    Lenny Shaver, LumaSense Technologies’ director of product management, explains the company’s IR and pyrometer technologies FLARING systems are common in many industries to burn gases before they enter the atmosphere. The safe operation of a flaring system requires the continuous monitoring of pilot flames and flared gases to ensure that vented gases are ignited. As ...

  • A Critical Evaluation of the South African Air Quality Offsets Guideline

    There is wide recognition in South Africa to the link between the quality of life and quality of the air we breathe. The Department of Environmental Affairs (DEA) attempts to improve air quality through two key regulatory tools; emission limits, which regulate the maximum concentration of certain pollutants permissible within certain, ‘listed’ industrial stacks or vents, and ambient ...


    By WKC Group

  • How Do PEMS Stack Up?

    Chemical Engineering Magazine journalist, Amer Khaqan investigates the installation of a relatively unknown method of emissions monitoring, PEMS (Predictive Emissions Monitoring System) at the methanol production facility of Arrazi in Saudi Arabia. The article shines light on the advancing technology of PEMS and explains the advantages of installing one, over the commonly used CEMS (Continuous ...


  • Assist Gas Measurement in Flare Stacks

    The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, ...

  • Benchmarking: How does your building stack up?

    Energy benchmarking can help you better understand your commercial property’s energy use and monitor performance over time. It allows for comparisons among similar building types and helps identify which ones could operate more efficiently. The Environmental Protection Agency and its ENERGY STAR® Program offers a free online tool called Portfolio Manager that allows users to track and ...


    By Energy Efficiency Markets

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • PureAire’s Oxygen Monitor uses a 10 + Zirconium Oxide O2 Sensor: Unlike the 1000 C degree Stack O2 sensors

    PureAire makes an Oxygen monitor for laboratories where nitrogen, helium, argon, carbon dioxide, and any cryogenic gases are stored. The O2 monitors are a standalone wall mounted unit with a built in audible alarm. The monitor utilizes a 10 + year Zirconium Oxide (ZrO2) sensor and has a backlit digital display showing readings of 0-25% range. PureAire has sold there O2 monitors while combining a ...

  • White Paper: ANSI N13.1-2011 Stack Sampling Considerations

    Background Nuclear facilities are required to follow industry standards for sampling stack effluents. Exposure of the general public to released radionuclides must be monitored as specified in US governmental regulations. The United States Environmental Protection Agency (USEPA) and the United States Nuclear Regulatory Commission (USNRC) have the authority over the monitoring of these ...

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • How does climate stack up against other worst-case scenarios?

    Climate isn’t the only catastrophe threatening the planet, but it may be the one most in need of attention and resources. The following is excerpted from Climate Shock (2015) by Gernot Wagner and Martin L. Weitzman. Published here with permission from Princeton ...


    By Ensia

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • An analysis of extinction coefficients of particles and water moisture in the stack after flue gas desulfurization at a coal-fired power plant

    Two important factors that affect in-stack opacity—light extinction by emitted particles and that by water moisture after a flue gas desulfurization (FGD) unit—are investigated. The mass light extinction coefficients for particles and water moisture, kp and kw, respectively, were determined using the Lambert-Beer law of opacity with a nonlinear least-squares regression method. The ...

  • Grana-Localized Proteins, RIQ1 and RIQ2, Affect the Organization of Light-Harvesting Complex II and Grana Stacking in Arabidopsis

    Abstract Grana are stacked thylakoid membrane structures in land plants that contain photosystem II (PSII) and light-harvesting complex II proteins (LHCIIs). We isolated two Arabidopsis mutants, reduced induction of non-photochemical quenching (riq1 and riq2), in which stacking of grana was enhanced. The curvature thylakoid 1a curt1a) mutant was previously shown to lack grana structure. ...


    By H Smith Plastics LTD

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Selection of Particulate Monitors

    The installation and operation of continuous particulate emission monitors in industrial processes has become well developed and common practice in industrial stacks and ducts over the past 30 years reflecting regulatory monitoring requirements. It supports requirements originating from LAPPC (Local Air Pollution Prevention and Control), IPPC (Integrated Pollution Prevention and Control), WID ...


    By PCME Ltd

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you