stack scrubbing Articles

  • Flux force condensation scrubbing

    Flux force condensation scrubbing technology is used to capture fine (submicron) particulate at extremely high efficiency. It is a preferred method when using wet scrubbing to collect and control dioxins from combustion sources. As an added benefit, through the use of condensation, the water vapor plume commonly associated with a wet scrubbing system can be effectively eliminated. The overall ...


    By Bionomic Industries Inc.

  • A breath of fresh air - Wet scrubbing eliminates odors associated with processing discarded liquid from cheese manufacturing

    When International Ingredient Corp.’s drying plant in Monroe, WI, opened in 1994, it was the first plant designed specifically for large-scale drum drying of dairy products for the feed industry. At that time, its only neighbor was a cheese producer. International Ingredient used a land spread technique to process the discarded liquids resulting from its neighbor’s cheese ...


    By Bionomic Industries Inc.

  • New fertilizer industry gas cleaning technology achieves lower required emission levels

    All fertilizer plants produce dust and gases, such as ammonia (NH3) and acid fumes, which must be removed at very high efficiencies before venting to atmosphere. Familiar examples are granulation and prilling of nitrogenous products such as Urea which is the most widely used fertilizer in the world(1). Phosphatic fertilizer production produces dust and Fluorine compounds. Typical air treatment ...


    By Kimre, Inc.

  • Compact scrubber for biosolids odors saves $500,000

    A new scrubber at a Camden, NJ bio solids processing facility uses advanced technology to cut the cost of odor control. The system was designed, built and installed by Bay Products with process design assistance from Lantec Products. A single tower is used to remove malodorous gases from air in two stages having separate sumps for the recirculated scrubbing solutions. The lower stage absorbs ...


    By Lantec Products, Inc.

  • Putting the Lid on Emissions - Food Engineering case study

    While the aroma of a cooked steak may be enticing to some, residents near a cooked-meat facility did not appreciate it. Polarized Meat Company of Dunmore, PA produces high-quality meat products designed to reduce preparation time at restaurants. Certain products are preformed and pre-cooked, often with grill marks added to enhance the products' visual appeal and flavor. Both the incoming meat ...


    By Bionomic Industries Inc.

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By PCME Ltd

  • Tri-NOx Multi-Chem Wet Scrubber. Case Study of Our NOx Scrubber in a Hydroprocessing Plant.

    Criterion Catalyst Co. L.P. is the world's largest supplier of catalysts for hydroprocessing, including hydrotreating applications. The company is also a leading supplier of reforming and specialty catalysts for the refining industry. Criterion's facility in Azusa, CA installed a Tri-NOx Mult-Chem scrubber with a 3000 cfm capacity at 250 lbs./hr. of NOx. The system has four polypropylene columns, ...


    By Tri-Mer Corporation

  • Mastertaste Savors the Benefits of Cost-Effective Odor Control

    The aromas from savory flavors are detectable even at low concentrations, and pose special challenges for companies who manufacture or use them.    Mastertaste, (Clark, N.J.) a Division of Kerry Group plc, is a leader in the development and production of savory flavors and blended seasonings.  As part of a plant expansion, Mastertaste needed a system to eliminate odors from ...


    By Tri-Mer Corporation

  • Tri-Mer Fan / Separator Chosen by Boeing

    Boeing Helicopter, Ridley Park, Pa., manufactures specialty aircraft components, for the Chinook (CH-47).  The facility also repairs and overhauls aircraft, including the entire US Chinook fleet. In June, 2003, Boeing contacted with Walgren Company (Grand Rapids, MI) for manufacture of an alodize line.  The 5-stage alodize system was specified with a Tri-Mer “Fan/Separator” to handle ...


    By Tri-Mer Corporation

  • Criterion catalyst co. case study

    Criterion is the world's largest supplier of catalysis for hydroprocessing, including hydrotreating applications.  The company is also a leading supplier of reforming and specialty catalysis for the refining industry. Criterion's facility in Azusa, CA installed a Tri-NOx Mult-Chem scrubber with a 3000 cfm capacity at 250 lbs/hr of NOx. The system has four polypropylene columns, three of ...

  • Innovative Q-PAC® packed two stage odor control scrubber saves $500,000

    Two stages in one 12 ft (3.7 m) tower treat 68,500 cfm (116,400 m3/hr) using high-capacity packing A new scrubber at a Camden, NJ biosolids processing facility uses advanced technology to cut the cost of odor control. The system was designed, built and installed by Bay Products with process design assistance from Lantec Products. A single tower is used to remove malodorous gases ...


    By Lantec Products, Inc.

  • In-situ Technology for Clean up of Halogen Contaminated Sites - Process West case study

    Halogenated volatile organic solvents are found in the soil or ground-water at many former and active industrial sites. Fortunately highly effective remediation technologies are available to restore these former brownfields to a healthy state. The range of technologies includes the traditional approach where the contaminated soil is excavated and the volatile halogenated contaminants are ...


    By Bionomic Industries Inc.

  • Supercritical water oxidation presented as alternative to incineration – An update

    Environmentally benign waste disposal is becoming a more and more acute problem. A process now being commercialised, supercritical water oxidation is demonstrating extremely efficient organic waste destruction (99.99%) plus excellent environmental characteristics (none of the emissions associated with incineration). The process is especially suitable for the treatment of wastewater and sludges ...


    By SCFI Group Limited

  • Engineering Expertise for a Diamond Mine in Canada`s Far North

    When Fabricated Plastics Limited of Maple, Ontario was invited to quote on some work for a diamond mining company in Canada's North West Territories, they were naturally intrigued by such a high interest project. The world of diamonds immediately conjures up exciting thoughts of exotic locations and immense wealth. In fact, the long, complex and arduous task of identifying diamond deposits, the ...


    By Fabricated Plastics Limited

  • Case study - Reactor vent emission control

    OVERVIEW Many chemical and petroleum companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the ...

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

  • Continuous emission monitoring and control of packed tower odor control systems using the sycamore CEM

    ABSTRACT Packed-tower chemical scrubbers, with sodium hydroxide (caustic) and sodium hypochlorite (bleach), are commonly used to treat foul air from wastewater treatment processes. The available control mechanisms include a pH probe and controller for the sodium hydroxide feed, an oxidation reduction potential (ORP) probe with a controller toestablish the bleach feed, and proprietary ...

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you