stack testing equipment Articles

  • Tax Credit Tips For Biogas Projects

    With the end of 2016 in plain view, anaerobic digestion (AD) projects in the development phase should examine what has to happen by December 31 in order to tap into available federal tax credits. Under current law, Section 45 of the federal tax code makes AD projects eligible for a Production Tax Credit (PTC), which can be converted into an Investment Tax Credit (ITC), if the projects are used to ...


    By BioCycle Magazine

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • How Does Your Organization Stack Up To The "Best Practices" In Refrigerant Regulations Compliance Management?

    Our "Best Practices" checklist was created from working with organizations throughout the country to develop and implement EPA Refrigerant Regulations compliance programs. The checklist contains what the EPA considers "must do" ...


    By IHS

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • The StyroPress styrofoam densification test results

    Two months ago a StyroPress styrofoam densifier was installed at a furniture company in Arizona. This unit has been monitored closely and we are now able to provide you with some of the results. This StyroPress EPS briquette system has now been compacting and densifying styrofoam for a couple of months. Feel free to contact us for the user and contact information should you have any questions of ...

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Development and Implementation of an Alternative Emissions Monitoring Program for Carbon Monoxide Compliance for Fluidized Catalytic Cracking Unit CO Boilers

    This paper presents the results of an alternative emissions monitoring test program for the Fluidized Catalytic Cracking Unit (FCCU) CO boilers at major oil refinery. Alternative emissions monitoring systems can be used in lieu of other compliance monitoring techniques (e.g., periodic emissions testing, continuous emissions monitoring) to relate monitored operating conditions which might indicate ...


    By Mostardi Platt Environmental

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Development and Implementation of an Alternative Emissions Monitoring Program for Carbon Monoxide Compliance for Fluidized Catalytic Cracking Unit CO Boilers

    This paper presents the results of an alternative emissions monitoring test program for the Fluidized Catalytic Cracking Unit (FCCU) CO boilers at major oil refinery. Alternative emissions monitoring systems can be used in lieu of other compliance monitoring techniques (e.g., periodic emissions testing, continuous emissions monitoring) to relate monitored operating conditions which might indicate ...


    By Mostardi Platt Environmental

  • Joint meeting of Essex & Union Counties

    Elizabeth, NJ Emissions inventory of a wastewater treatment plant, air permitting of sources Keywords: wastewater treatment plant, emissions inventory, air permits Marc Karell managed and performed a project for the Joint Meeting of Essex & Union Counties, a major wastewater treatment plant in Elizabeth, NJ. Marc reviewed and listed all equipment potentially emitting ...


  • Case study - Engine cell exhaust: Catalytic oxidizer

    Overview Endurance testing of outboard motors for boats has typically been done in lakes and sometimes on barges. This testing was time consuming, presented logistic problems and removed the testing from the R & D department and the factory. When a company in Oklahoma decided to build their own endurance test cell area, the Environmental Protection Agency required them to control the ...

  • Popular analysers are portable and rentable

    The MCERTS approved HORIBA PG-250 has been one of the most popular  instruments in Ashtead Technology’s fleet of rental equipment for a number of  years. Jay Neermul, the company’s Environmental Product Manager says “This  is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard  reference methods in a portable instrument that can be easily and ...


    By Ashtead Technology Ltd

  • Case study - Controlling odors at a specialty plastics manufacturer

    Challenge A specialty plastics manufacturer in the eastern United States makes a plastic compound that, because of its unique and desirable properties, is widely used in the automotive industry. Complications arose for this manufacturer because, in the production process, mercaptans are driven off and produce a non-hazardous but offensive nuisance odor problem. The ...


    By OMI Industries (OMI)

  • It’s not just clean; it’s CETCOclean - chemical cleaning of 10”and 8” ethane pipelines

    CETCO Oilfield Services Pipeline Division chemically cleaned 10” and 8” ethane pipeline segments prior to an in-line inspection (first time ILI on the 10” pipeline). The operator’s primary concerns were flow interruptions to the receiving plant and ensuring that all line debris was collected prior to entering the downstream 8” section. CETCO designed and supplied all necessary equipment and ...


    By CETCO Energy Services

  • Development of Low noise landfill gas flare

    Summary: Increasing requirements of the environmental standards and planning permission conditions create more challenges to the equipment providers. Environment Agency guidance demands low emission levels and local planners put low noise levels in their conditions for landfill sites. Achieving both at the same time with conventional equipment was found problematic. Biogas Technology has ...


    By Biogas Technology Limited

  • Engineering Expertise for a Diamond Mine in Canada`s Far North

    When Fabricated Plastics Limited of Maple, Ontario was invited to quote on some work for a diamond mining company in Canada's North West Territories, they were naturally intrigued by such a high interest project. The world of diamonds immediately conjures up exciting thoughts of exotic locations and immense wealth. In fact, the long, complex and arduous task of identifying diamond deposits, the ...


    By Fabricated Plastics Limited

  • Keeping Pace with PTP and CCRL

    Two, three or four times a year, laboratories around the world check their performance with testing programs from ASTM International’s Proficiency Testing Program and the Cement and Concrete Reference Laboratory. Using samples sent for a particular program cycle, labs run specific methods and submit their results to PTP and CCRL for analysis. Each lab then receives reports that serve as a ...


    By ASTM International

  • Case Study - Heatset Web Offset Printing (2)

    Problem: New press additions required more oxidizer capacity than the existing systems could provide. Equipment: Unit #1: Refurbished Catalytic Recuperative; 4000 scfm (1985); Installed 2002.                     Unit #2: Refurbished Catalytic Recuperative; 5000 scfm (1993); Installed 2003.                     Location: Florida Project ...


    By Kono Kogs, Inc.

  • EPA mandatory reporting of GHGs rule

    Recent EPA Guidance EPA does not intend for the calibration requirements of 98.3(i) to apply to any units where the rule allows the use of “company records” to quantify fuel usage or other parameters; however, a facility’s GHG monitoring plan must include descriptions of the procedures and methods used for quality assurance, maintenance, repair of all flow meters ...


    By Trinity Consultants

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you