stack testing equipment manufacturer Articles

  • Tax Credit Tips For Biogas Projects

    With the end of 2016 in plain view, anaerobic digestion (AD) projects in the development phase should examine what has to happen by December 31 in order to tap into available federal tax credits. Under current law, Section 45 of the federal tax code makes AD projects eligible for a Production Tax Credit (PTC), which can be converted into an Investment Tax Credit (ITC), if the projects are used to ...


    By BioCycle Magazine

  • Case study - Controlling odors at a specialty plastics manufacturer

    Challenge A specialty plastics manufacturer in the eastern United States makes a plastic compound that, because of its unique and desirable properties, is widely used in the automotive industry. Complications arose for this manufacturer because, in the production process, mercaptans are driven off and produce a non-hazardous but offensive nuisance odor problem. The ...


    By OMI Industries (OMI)

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • How has MCERTS impacted CEMS?

    Industrial process operators that produce gas emissions to atmosphere are regulated by the Environment Agency. Monitoring of these emissions ensures that the environment is being properly protected and helps them manage their own impact on the environment. Under the Environmental Permitting Regulations, these sites are required to continually measure emission parameters from their chimney-stacks ...


    By a1-cbiss

  • Case study - Oxidizer system optimization

    OXIDIZER SERVICE SERIES: PART 4 As promised, this is the fourth installment of Anguil's Oxidizer Service Series. If you have read through the first three parts, this can be seen as a capstone of those efforts. Having a strong oxidizer service plan, backed up with recommended spare parts and all of the proper documentation will not only improve your system performance but also allow you to focus ...

  • Case study - How to properly maintain and service your oxidizer

    Your air pollution control system represents a significant investment in not only initial capital but also ongoing maintenance and operation. Routine inspections performed by your staff combined with thorough maintenance plans provided by Anguil Environmental Service Technicians will ensure you get the most from your investment over the entire life of the system. Anguil has almost three decades ...

  • For Light Industry, Geotube Dewatering Technology Provides An Effective Solution - Case Study

    For many industrial applications, dewatering is a necessary evil. It disrupts operations, adds cost, and requires complicated and expensive equipment. But this doesn't have to be the case. There's a much simpler, less expensive approach to the task. It's called Geotube dewatering technology, and it's been used in a broad range of industries. Geotube dewatering technology can be a temporary or ...

  • In-Vessel Composting of Residential Organics

    In 1994, the Regional Municipality of Peel began work on a system for residential organic residuals collection and composting. Although Peel had been promoting backyard composting, greater diversion rates were sought. The public was surveyed to determine what level of cooperation could be expected for source separation and setting out of food, soiled paper products, yard trimmings, etc. “We knew ...


    By BioCycle Magazine

  • Mono nov solves another fishy problem

    A division of Monsanto, NutraSweet Kelco is the world’s largest producer of alginate, a by-product of seaweed which is used as a natural thickener in the food, pharmaceutical, textiles and pet food industries. The efficiency of the production process and the quality of the final product is heavily dependent upon the thorough screening of river water to remove all debris, such as twigs, logs and ...

  • Mono nov solves another fishy problem

    A division of Monsanto, NutraSweet Kelco is the world’s largest producer of alginate, a by-product of seaweed which is used as a natural thickener in the food, pharmaceutical, textiles and pet food industries. The efficiency of the production process and the quality of the final product is heavily dependent upon the thorough screening of river water to remove all debris, such as twigs, logs and ...

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Wasting energy through steam loss

    The European Union Directive on the Energy Performance of Buildings, which relates to all member nations of the European Union, are obliged to set limits on greenhouse gas emissions, particularly from buildings. Typically steam is used for a wide range of applications within larger establishments including, humidification, hot water, space heating and air heating.  Primary energy losses in ...

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Solar`s Time to Rise and Shine.

    Photovoltaic efficiency records are being shattered, thanks to recent advances in materials science. Last month, a researcher at the National Renewable Energy Laboratory in Golden, Colo., loaded a postage stamp–sized solar cell onto a tray and placed it under a high-intensity pulse solar simulator. The simulator flashed a 2.5 millisecond pulse of light, and 19 mirrors reflected the ...


    By Ensia

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you