stack testing method Articles

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Analyzing Stack Gas Semivolatiles, Using Supelpak-2 Adsorbents and Capillary GC (Modified Method 5, US EPA SW-846)

    The demanding detection limits required for air sampling by Modified Method 5 (US EPA SW-846, Method 0010) necessitates extensive cleaning and meticulous handling of the adsorbent cartridge/trap during sampling and analysis. Supelpak-2 adsorbent is cleaned in accordance with and meets the purity criteria of EPA SW-846, Method 0010, for testing semivolatile emissions from incinerator stationary ...


    By Sigma-Aldrich Co., LLC

  • Engineers Benefit from Geotube Stacking Technology & Analysis - Case Study

    Stacking Geobag units makes projects previously thought impossible, possible. Since 1962, Geotube  technology has protected countless shorelines and provided low cost, high volume dewatering solutions to companies all over the world. Starting off as a single layer unit designed for shoreline erosion protection, Geotube structures have been developed and improved for more than 40 ...

  • Method 301 Evaluation of Candidate conditional methods case study

    A new metal emissions measurement and validation system has recently been developed that has the potential to significantly improve our understanding of metal emissions from a wide range of source categories. This system consists of: A continuous emission monitoring system (Xact-CEMS) An instrumental analyzer procedure (Xact-IAP) A sampling and analysis measurement method ...


    By Cooper Environmental

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • How Does Your Organization Stack Up To The "Best Practices" In Refrigerant Regulations Compliance Management?

    Our "Best Practices" checklist was created from working with organizations throughout the country to develop and implement EPA Refrigerant Regulations compliance programs. The checklist contains what the EPA considers "must do" ...


    By IHS

  • Grana-Localized Proteins, RIQ1 and RIQ2, Affect the Organization of Light-Harvesting Complex II and Grana Stacking in Arabidopsis

    Abstract Grana are stacked thylakoid membrane structures in land plants that contain photosystem II (PSII) and light-harvesting complex II proteins (LHCIIs). We isolated two Arabidopsis mutants, reduced induction of non-photochemical quenching (riq1 and riq2), in which stacking of grana was enhanced. The curvature thylakoid 1a curt1a) mutant was previously shown to lack grana structure. ...


    By H Smith Plastics LTD

  • Coming In Out of the Cold: Hybrids Put to the Test

    Untitled Document Point Roberts, WA, Delta B.C.- May 25, 2004 With gas prices reaching an all time high and not much promise of an end in sight, hybrid technology is falling under the lens of some careful ...


    By Investor Ideas Inc

  • Evaluation of total particulate matter emission factors for copper slag in dry abrasive blasting

    Abrasive blasting was performed in enclosed conditions to evaluate the effect of blast pressure, feed rate and surface contamination on Total Particulate Matter (TPM) emission factors for copper slag. Stack sampling methods were used to collect uncontrolled TPM. Emission factors were calculated as grams of TPM emitted per pound of copper slag used (g/lb) and grams of TPM emitted per square foot ...


    By Inderscience Publishers

  • Engineering Properties of Tire/Soil Mixtures as a Lightweight Fill Material

    The United States Environmental Protection Agency (USEPA) estimates that over 279 million discarded tires are being added annually to the already existing stockpile of two billion tires. Current disposal and stacking methods of waste tires are not acceptable due to the possibility of fire and health hazards. Several states and the federal government have issued legislation that encourages or ...


    By ASTM International

  • Investigations into the possibility to compost paraffincoated packaging materials

    Utilisation of biodegradable materials is indispensable for effective economic operation (Soyez, 1998). However, the requirements to be met by the application characteristics sometimes prevent use of such materials. For example, packaging materials for foodstuffs, where protection of the contents is the predominant aim, are required to display hydrophobic properties. Paraffin-coated papers have ...


    By ORBIT e.V.

  • An environmentally–friendly integrated seismic imaging for coal exploration in the Miocene Soma Basin, Western Turkey

    Seismic reflection data from target depths of several hundred metres have been acquired and processed as an aid for lignite exploration in the Miocene Soma Basin, western Turkey. An environmentally–friendly approach was followed by acquiring the data with mini–vibroseisseismic source along crooked lines, using available mountain/forest and village roads; quality control tests were conducted to ...


    By Inderscience Publishers

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Popular analysers are portable and rentable

    The MCERTS approved HORIBA PG-250 has been one of the most popular  instruments in Ashtead Technology’s fleet of rental equipment for a number of  years. Jay Neermul, the company’s Environmental Product Manager says “This  is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard  reference methods in a portable instrument that can be easily and ...


    By Ashtead Technology Ltd

  • Electrochemical Exhaust Gas Purification - SAE technical paper series

    This text is divided into Iwo parts; the first part gives a short recapitulation 01 the development status 01 the eiectrochemical reactor lor soot removal, while the second part gives a description 01 activities on electrochemical NOx reduction. The Electrochemical Reactor lor filtration and continuous combustion 01 soot lrom diesel exhaust gas has been described earlier [1, 2]. The reactor size ...


    By Dinex A/S

  • EPA mandatory reporting of GHGs rule

    Recent EPA Guidance EPA does not intend for the calibration requirements of 98.3(i) to apply to any units where the rule allows the use of “company records” to quantify fuel usage or other parameters; however, a facility’s GHG monitoring plan must include descriptions of the procedures and methods used for quality assurance, maintenance, repair of all flow meters ...


    By Trinity Consultants

  • Keeping Pace with PTP and CCRL

    Two, three or four times a year, laboratories around the world check their performance with testing programs from ASTM International’s Proficiency Testing Program and the Cement and Concrete Reference Laboratory. Using samples sent for a particular program cycle, labs run specific methods and submit their results to PTP and CCRL for analysis. Each lab then receives reports that serve as a ...


    By ASTM International

  • Analysis of TNT and RDX in groundwater

    MATRIX: Water ANALYTE: TNT and RDX LIMIT OF DETECTION: TNT 1 ppb (mg/L), RDX: 5 ppb (mg/L) BACKGROUND: This application describes a field screening method for determining TNT and RDX concentrations in water. The method uses solid phase extraction to remove and preconcentrate the analytes from water. In the method, a 2 ...


  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you