stand-alone hg analysis system Articles

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Overview of Rotating Disc Electrode (RDE) Optical Emission Spectroscopy for In-Service Oil Analysis

    Introduction The basis of modern oil analysis is the use of optical emission spectroscopy (OES) to measure the ppm (parts per million) levels of wear metals, contaminants and additives in oil samples. Whatever else an oil lab may measure, a multi-elemental analysis is the core of in-service oil analysis. This paper gives an overview of Rotating Disc Electrode Elemental Spectroscopy and its ...


    By Spectro Scientific

  • ASHRAE Standard 188P: Prevention of Legionellosis Associated with Building Water Systems

    For Presentation at the AWT 2011 Convention and Exposition  The American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE) has developed a proposed Standard Practice that specifies what is required to prevent legionellosis associated with building water systems. Standard 188P is a “Practices” standard – not a “Design” or ...


    By Phigenics, LLC

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • Storm Water Master Plan development employing an integrated 1D/2D model for the Redwood Basin in Josephine County, Oregon - Case Study

    The use of two-dimensional (2D) storm water models has increased in recent years primarily due to advances in software, hardware and the availability of surface data. These advances allow for robust and diverse applications including basinwide storm water assessments. Storm water master planning is a critical element for the development of state and local agency comprehensive plans, capital ...


    By XP Solutions

  • Modelling the Thatcham Flood - Case Study

    Overview On 20th July 2007, an unusual storm swept west across England along the approximate line of the M4 motorway. Thatcham, a town in Berkshire, was one of the worst affected. Many towns in England flooded that month from the Humber to Tewksbury. In fact there were 200 major floods worldwide in 2007 affecting 180 million people. Some of these floods were caused by rainfalls much more ...


    By XP Solutions

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you