stationary flow monitoring Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Monitoring Oil in Cooling Water

    The Situation A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid ...

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Online discharge measurement with horizontal doppler-flow sensor

    Background The regional authority responsible for the barrages in the Free State of Saxony is in charge of the water management of the Rötha. Reservoir. This reservoir is situated close to the river Pleiße, from which the water is led over a weir into the reservoir.. Knowledge about the inflows of the reservoir is important for the water management there. So far, the ...

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Casella intrinsically safe TUFF personal air sampling pump and dBadge sound level meter are a hit down under with Australian department of defence

    Following a competitive tender process, the Australian Department of Defence has taken delivery of 180 TUFF personal air sampling pumps and 180 CEL-350 dBadge personal noise dosimeters from Casella CEL (www.casellameasurement.com; 01234 844100), leading global specialist in industrial hygiene and occupational health monitoring equipment. Ronald Azar, ...


    By Casella

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Update on Federal Air and GHG Regulations Affecting Landfills

    EPA’s recent regulatory changes are expected to alter the way landfills are regulated for the foreseeable future with a potential to add additional compliance costs for the industry.  The air quality and greenhouse gas (GHG) regulatory framework at the federal level is currently in a state of flux with respect to landfills. The landfill industry awaits the issuance of a revised ...


    By Waste Advantage Magazine

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • Preparing for EPA’s mandatory reporting of greenhouse gases rule

    Recent action by the US EPA to finalize the Mandatory Reporting of Greenhouse Gases (GHG) Rule means that environmental managers must now seriously examine whether they are fully prepared to address the imminent requirements. This article provides some assistance by summarizing key points regarding the final versus proposed rule, providing clarification on key questions that have arisen since the ...


    By Trinity Consultants

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • Least-Cost Approaches to Reducing Acid Emissions

    ' The costs of meeting sulfur emission targets can be high. It is essential, therefore, that countries adopt policies which (a) minimize the net economic and social costs of reducing emissions to the agreed target levels, and (b) maximize the overlap between measures designed to reduce acidifying emissions and those addressing other forms of air pollution. This note discusses alternative ...


    By The World Bank

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • UE: risk of shortage for 8 rare earth metals

    In a report published on November 4th, the European Joint Research Centre (JRC) has warned of the "risk of shortage" in 2020-2030 of eight strategic metals used in low carbon energy technologies identified in the European SET Plan adopted in 2008. This report continues the work done in a previous study of the JRC from 2011. It is also based on the scenarios presented in 2011 in the roadmap of ...


    By Stanford Magnets

  • Biosolids Composter Satisfies Customers and Neighbors

    A ticket to Penn State football games isn’t the only hard thing to come by in State College, Pennsylvania. So is the biosolids compost produced by State College’s University Area Joint Authority (UAJA) wastewater treatment plant. “For the last four years, we’ve been sold out before we’ve made the compost,” says Stephen Welch, who manages the UAJA composting plant. All biosolids generated — about ...


    By BioCycle Magazine

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Clarifier maintenance

    Clarifiers are expensive, to buy or repair, and their downtime can be costly in fines imposed by regulatory agencies and in community ill will. Regular maintenance, an annual inspection of the mechanism and an occasional touchup of the paint or coating system are simple and inexpensive proactive steps that will usually prevent most problems. Three components of all clarifiers require maintenance: ...


    By WesTech Engineering, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you